Quote:
Originally Posted by lakeviewink
I installed a 48" C2C on my 4'x2'x22" 110g. I have a build thread on another forum, PM me if you need a link. I put the two pieces of glass together with aquarium silicon OUTSIDE the tank. I used some tiles and clamps to hold it in place. Then, using more crafty props installed the weir in the tank.
Most importantly, I waited to put the euro-bracing on last, and yes the measurements need to be about 1/4"-3/8" less than your inside tank dims. A little masking tape makes your seams and joints look much cleaner when you are all finished.
|
Are you saying that there should be euro bracing on the c2c?