Quote:
Originally Posted by Reef monkeys
So did you get a continuous bead of silicone along the whole L shape and get it in there without smearing the sides?
|
Yes, like I said, lay down some masking tape first at the side hardest to reach. I put a light bead down then carefully, placed the c2c up to/ in the bead. Then use a wet finger to push/draw the bead further between the seam. Then,If needed, I would lay a small bead on the opposite side, after, taping of course. Then, after curing, use a razor and carefully pull the tape while watching to not pull the bead out. I score it with the blade if it is stubborn. I should say, this was with the aquarium laying in its back on a blanket. Gravity is our friend…