Milwaukee use only one calibration solution

heshamm · 11/03/2007, 11:17 PM

I can use only one calibration Solution to adjust the reading stabilize and calibration trimmer

Example using one ph 7.01 calibration solution to adjust trimmer ph 7 then I uses the same ph 7.01 calibration solution to adjust trimmer ph 4 /10
I need your recommend

For ORP what is good reading I should setpoint from -200 to 600 mv

mr. pluto · 11/04/2007, 12:51 AM

i had to buy a 4.0 cal. solution, to accurately calibrate the
ph controller,

heshamm · 11/04/2007, 05:53 AM

setpoint the reading on 7 then adjust trimmer ph 7 on 7 by ph 7.01 calibration solution

repeat the setpoint reading on 7 then adjust trimmer Ph 4/10 on 7 by ph 7.01 calibration solution

11/03/2007, 11:17 PM	#1
heshamm Registered Member Join Date: Jan 2006 Posts: 63	Milwaukee use only one calibration solution I can use only one calibration Solution to adjust the reading stabilize and calibration trimmer Example using one ph 7.01 calibration solution to adjust trimmer ph 7 then I uses the same ph 7.01 calibration solution to adjust trimmer ph 4 /10 I need your recommend For ORP what is good reading I should setpoint from -200 to 600 mv

11/04/2007, 12:51 AM	#2
mr. pluto Registered Member Join Date: Jan 2001 Location: bay area Posts: 1,191	i had to buy a 4.0 cal. solution, to accurately calibrate the ph controller,

11/04/2007, 05:53 AM	#3
heshamm Registered Member Join Date: Jan 2006 Posts: 63	setpoint the reading on 7 then adjust trimmer ph 7 on 7 by ph 7.01 calibration solution repeat the setpoint reading on 7 then adjust trimmer Ph 4/10 on 7 by ph 7.01 calibration solution