Aquacontroller Jr Setup help!!!

kikireef · 08/07/2009, 11:15 PM

Ok so I recieved my AC jr today and am trying to set it up now. I understand the codes for the most part and have started to program stuff into it but my problem is this... Once the codes are in how do I know where to plug the stuff into the DC8 such as lights heater etc. ? The codes A01, A02 etc. Does that mean A being the first DC8 (I only have one) and the 01, 02 being outlet1 and outlet2? I'm so confused!!!

JoeinMo · 08/08/2009, 07:34 AM

Yep, there should have been a booklet that came with the DC8 that illustrates the outlet's location codes. The Default from the factory is A. Then, with the power cord to the left, the outlets start with 01 in the top left corner and 05 in the bottom left corner.

kikireef · 08/08/2009, 12:16 PM

Ok cool so another question has come up. I put in a command for the timer and instead of getting the icon on the "running screen" i am getting a "U". What does that mean?

JoeinMo · 08/08/2009, 01:57 PM

It means Unknown. My fan and heater display this after a reboot, they return to normal after a command scenario is triggered, such as the temp is high enough to turn the fan on. To better explain, if the system reboots and the temp is 98.5 then my fan will display U until the temp reaches either 98 or 99 (off or on). Hope this helps.

08/07/2009, 11:15 PM	#1
kikireef Registered Member Join Date: May 2009 Location: Chino at The Preserve Posts: 1,107	Aquacontroller Jr Setup help!!! Ok so I recieved my AC jr today and am trying to set it up now. I understand the codes for the most part and have started to program stuff into it but my problem is this... Once the codes are in how do I know where to plug the stuff into the DC8 such as lights heater etc. ? The codes A01, A02 etc. Does that mean A being the first DC8 (I only have one) and the 01, 02 being outlet1 and outlet2? I'm so confused!!!

08/08/2009, 12:16 PM	#3
kikireef Registered Member Join Date: May 2009 Location: Chino at The Preserve Posts: 1,107	Ok cool so another question has come up. I put in a command for the timer and instead of getting the icon on the "running screen" i am getting a "U". What does that mean? __________________ Keith SCMAS Member Tank Info: 120 gallon 48"x30"x20" Leemar Rimless. 2 MP40w, 1 MP10w, SROsss Skimmer, ATI Sunpower 8x54w, Neptune Apex Controller with WXM module. 2 BRS dosing pumps. Check my homepage for the build...

08/08/2009, 07:34 AM	#2
JoeinMo Registered Member Join Date: Jul 2009 Posts: 64	Yep, there should have been a booklet that came with the DC8 that illustrates the outlet's location codes. The Default from the factory is A. Then, with the power cord to the left, the outlets start with 01 in the top left corner and 05 in the bottom left corner.

08/08/2009, 01:57 PM	#4
JoeinMo Registered Member Join Date: Jul 2009 Posts: 64	It means Unknown. My fan and heater display this after a reboot, they return to normal after a command scenario is triggered, such as the temp is high enough to turn the fan on. To better explain, if the system reboots and the temp is 98.5 then my fan will display U until the temp reaches either 98 or 99 (off or on). Hope this helps.