setting up mp40w to sync

rogerwilco357 · 12/12/2010, 05:42 AM

how do you sync or setup two mp40 W. models to slave and master? and does it matter if one is the es W model and the other just the wireless mp40 board?

Roger

Eel-byte · 12/12/2010, 07:55 AM

It does work, but you have to use one if the modes supported by the mp40w and yes you have to set one to master and one to slave. I kept one of my mp40w drivers for a backup which came in handy. I had to send one of the eco drivers back for repair. I would go to the ecotech website and download the instructions.

laud · 12/12/2010, 10:15 AM

These are the directions in pdf format....

http://ecotechmarine.com/wp-content/...manual_1.1.pdf

oscar.millan · 12/12/2010, 12:22 PM

Follow the instructions, its pretty easy to setup. I love my Vortechs!

rogerwilco357 · 12/12/2010, 10:17 PM

thanks

12/12/2010, 05:42 AM	#1
rogerwilco357 Registered Member Join Date: Jun 2005 Location: michigan Posts: 1,391	setting up mp40w to sync how do you sync or setup two mp40 W. models to slave and master? and does it matter if one is the es W model and the other just the wireless mp40 board? Roger __________________ hook line and sinker Current Tank Info: 2x2x4 120gal,sump45 gal.RKE controller,ATI Powermodule 8x80watt,1MP20+2MP40,1 mp10,RoyalExclusive Alpha200

12/12/2010, 10:15 AM	#3
laud Registered Member Join Date: Aug 2007 Location: fort lauderdale Posts: 1,225	These are the directions in pdf format.... http://ecotechmarine.com/wp-content/...manual_1.1.pdf __________________ Watch your thoughts; they become words. Watch your words; they become actions. Watch your actions; they become habits. Watch your habits; they become character. Watch your character; it becomes your destiny. —Lao-Tze Current Tank Info: 210, 75 sump/refugium, AquaC EV-240, 3LB's Radium 20k, vho supplement and now a Korallin 1502 CR and a phosban reactor.

12/12/2010, 12:22 PM	#4
oscar.millan Registered Member Join Date: Aug 2007 Location: Los Angeles, CA Posts: 2,003	Follow the instructions, its pretty easy to setup. I love my Vortechs! __________________ "Let the future tell the truth and evaluate each one according to his work and accomplishments. The present is theirs; the future, for which I really worked, is mine." -Tesla Current Tank Info: 180g mixed reef, 90g rimless cube.

12/12/2010, 10:17 PM	#5
rogerwilco357 Registered Member Join Date: Jun 2005 Location: michigan Posts: 1,391	thanks __________________ hook line and sinker Current Tank Info: 2x2x4 120gal,sump45 gal.RKE controller,ATI Powermodule 8x80watt,1MP20+2MP40,1 mp10,RoyalExclusive Alpha200

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VorTech MP40W Low Speed Vibration	tmelhiser	EcoTech Marine	4	01/31/2015 03:39 PM
New MP40w ES question	namsupak	EcoTech Marine	3	06/12/2010 07:12 AM
Need Help Setting 2 MP40w	brick-brothers	Lighting, Filtration & Other Equipment	2	02/08/2010 12:03 AM
2x mp40w reef-crest mode in sync or anti-sync? also placement qs	launchnukes	Reef Discussion	4	04/26/2009 09:35 AM

12/12/2010, 07:55 AM	#2
Eel-byte Premium Member Join Date: May 2004 Location: Duluth, Mn Posts: 1,508	It does work, but you have to use one if the modes supported by the mp40w and yes you have to set one to master and one to slave. I kept one of my mp40w drivers for a backup which came in handy. I had to send one of the eco drivers back for repair. I would go to the ecotech website and download the instructions.