Pacific Sun Metis Hyperion R2

minunatul · 03/31/2012, 08:20 AM

Can any help me to program this page, do not know what to do,
please send a picture how look the home with you.

Greg 45 · 03/31/2012, 09:01 AM

There is a post on here but to get you started
9:00 to 10:00 set colors you want on update row
10:01 to 11:00 set colors update row
when finished send to lamp
If you get stuck call Yorgos he is a great help
It's a little confusing in the begining dont worry everyone will get you through it

Pacific Sun RD · 09/07/2012, 12:25 AM

@minunatul
Please use latest firmware and software updates - it will fix problem with PAR table programming - and you will be able to use Light Spectrum Creator - with daylight chart.
It should help you.

@greg45
Thanks for support. Newest version automatically fill next row with start time - so PAR table programming should be much easier.
But let we will discuss in our RC section:
http://www.reefcentral.org/forums/fo...play.php?f=680

Regards

Pacific Sun RD Team

drgorecki · 11/27/2012, 04:59 PM

I’d like to share with you my experience with Pacific Sun LED lamps. As we know, right now it’s even harder to make the decision on what type of LEDs we should buy, because there are many good products on the market but I did finally purchased my unit.

I had been doing extensive research on LED light systems for more than 1 year and then made the decision to purchase the Metis Hyperion R2 4x150W model for my 72Lx18Dx28H reef system.

First I almost placed an order for a DIY LED system. After that, I almost bought the Radion XR30w, a very good and a popular product but e.g. not good cooling system design (I heard bad experience from many people). AI looks like a brick and we can’t compare output with Metis Hyperion. Now, I’m glad I didn’t buy DIY, Radion or AI.

Please see the photos and review at the following link with more to be posted.

A lot more:

http://www.reefcentral.com/forums/sh...2114343&page=8

http://www.reefcentral.com/forums/sh...2114343&page=9

ImagineAnOcean · 11/27/2012, 05:23 PM

Again, thanks Doc. Great feedback and info...pics are great.

IAO

Pacific Sun RD · 11/28/2012, 02:14 AM

@drgorecki
We are glad that you are satisfied with your purchase - and we look forward to more photos! :-)
What type of lighting you had before over the aquarium?

drgorecki · 11/29/2012, 03:47 PM

Before, I was using long lamp with 4xPC (10K and Actinic). Too much power consumption, weak light, Algae and Cyano bacteria growth.
Now, I'm very happy with the new Pacific Sun LED system

No more Algae and Cyano growth on my sand

11/27/2012, 04:59 PM	#4
drgorecki Registered Member Join Date: Oct 2010 Location: NJ Posts: 29	Metis Hyperion R2 4x150W - TESTS I’d like to share with you my experience with Pacific Sun LED lamps. As we know, right now it’s even harder to make the decision on what type of LEDs we should buy, because there are many good products on the market but I did finally purchased my unit. I had been doing extensive research on LED light systems for more than 1 year and then made the decision to purchase the Metis Hyperion R2 4x150W model for my 72Lx18Dx28H reef system. First I almost placed an order for a DIY LED system. After that, I almost bought the Radion XR30w, a very good and a popular product but e.g. not good cooling system design (I heard bad experience from many people). AI looks like a brick and we can’t compare output with Metis Hyperion. Now, I’m glad I didn’t buy DIY, Radion or AI. Please see the photos and review at the following link with more to be posted. A lot more: http://www.reefcentral.com/forums/sh...2114343&page=8 http://www.reefcentral.com/forums/sh...2114343&page=9

03/31/2012, 09:01 AM	#2
Greg 45 Registered Member Join Date: Aug 2005 Location: Bayonne,N.J. Posts: 1,159	There is a post on here but to get you started 9:00 to 10:00 set colors you want on update row 10:01 to 11:00 set colors update row when finished send to lamp If you get stuck call Yorgos he is a great help It's a little confusing in the begining dont worry everyone will get you through it

09/07/2012, 12:25 AM	#3
Pacific Sun RD Przemek Cybulski Join Date: May 2012 Location: Gdynia Posts: 251	@minunatul Please use latest firmware and software updates - it will fix problem with PAR table programming - and you will be able to use Light Spectrum Creator - with daylight chart. It should help you. @greg45 Thanks for support. Newest version automatically fill next row with start time - so PAR table programming should be much easier. But let we will discuss in our RC section: http://www.reefcentral.org/forums/fo...play.php?f=680 Regards Pacific Sun RD Team

11/27/2012, 05:23 PM	#5
ImagineAnOcean .Registered Member Join Date: Oct 2012 Location: Boston, MA Posts: 24	Again, thanks Doc. Great feedback and info...pics are great. IAO

11/28/2012, 02:14 AM	#6
Pacific Sun RD Przemek Cybulski Join Date: May 2012 Location: Gdynia Posts: 251	@drgorecki We are glad that you are satisfied with your purchase - and we look forward to more photos! :-) What type of lighting you had before over the aquarium?

11/29/2012, 03:47 PM	#7
drgorecki Registered Member Join Date: Oct 2010 Location: NJ Posts: 29	Before, I was using long lamp with 4xPC (10K and Actinic). Too much power consumption, weak light, Algae and Cyano bacteria growth. Now, I'm very happy with the new Pacific Sun LED system No more Algae and Cyano growth on my sand