|
|
|
06/05/2012, 01:52 PM
|
#1 |
|
Registered Member
Join Date: Apr 2012
Location: Sacramento, CA USA
Posts: 238
|
ATO Location Suggestions
Ok, I'm ready to set up my ATO system. I took a photo of my sump where the return pump is located. The water level is with the pump's ball valve fully open so I have complete flow operating now and the water level is stable in the sump. I'm just looking for suggestions as to where I should set the minimum water level be. Thanks in advance.
__________________
Waggs Tank info: Size = 100 gallons, 48" long, 18" wide and 24" deep. Sump Info: 20 gallon long converted with baffles installed. EMI 3100 return pump with a head pressure of about 960 GPH |
|
|
|
06/05/2012, 02:53 PM
|
#2 |
|
Registered Member
Join Date: Oct 2006
Location: Lake St Louis, MO
Posts: 1,391
|
Just set your low level to make sure you never run your return pump dry. Try just right above the pump and it should work just fine. I would run it maybe a couple inches above the pump.
-Steve |
|
|
|
 |
|
|
