Water Level for Super Reef Octopus RO-PS-2000INT

mougliblore · 02/22/2013, 09:33 AM

What is the optimal water level for Super Reef Octopus RO-PS-2000INT? I am currently curing my live rock using this. But I don't see it pulling much gunk as I expected. Also, The bubble levels in the filter cup keep going up and down all the time. What am I doing wrong?

hazey62 · 02/22/2013, 09:39 AM

water level is 5 3/4" for that skimmer. If the bubbles are going up and down it would suggest that your water level is going up and down?

jabbott · 02/22/2013, 09:52 AM

Their website says 5.75 inches, but the directions say 6-10 inches as long as the water outlet is not covered.
http://coralvue.com/wp-content/uploa...ion-manual.pdf
Personally I'm going to go with the guy who wrote the directions over the guy who wrote the website.

Also the skimmer needs to be in a part of the sump where the water level doesn't change. So basically anywhere except the last chamber.

nikon187 · 02/22/2013, 07:47 PM

Quote:

Originally Posted by jabbott

Their website says 5.75 inches, but the directions say 6-10 inches as long as the water outlet is not covered.
http://coralvue.com/wp-content/uploa...ion-manual.pdf
Personally I'm going to go with the guy who wrote the directions over the guy who wrote the website.

Also the skimmer needs to be in a part of the sump where the water level doesn't change. So basically anywhere except the last chamber.

Unless your last chamber doesn't have a return pump in it, mines in the middle chamber. But yes a section that has a set water level and doesn't fluxuate due to evaporation.

jabbott · 02/22/2013, 07:55 PM

Quote:

Originally Posted by nikon187

Unless your last chamber doesn't have a return pump in it, mines in the middle chamber. But yes a section that has a set water level and doesn't fluxuate due to evaporation.

I miss wrote. When I said last chamber I meant the last chamber the water goes into in the sump.

cap032 · 02/22/2013, 09:52 PM

Optimal depth is 5.75 inches. Much deeper and you will have overflowing issues.

jabbott · 02/22/2013, 10:34 PM

Quote:

Originally Posted by cap032

Optimal depth is 5.75 inches. Much deeper and you will have overflowing issues.

Not true. I have personally run this skimmer in 8.5 inches with no problem.

Dr Colliebreath · 02/23/2013, 12:51 PM

I have found mine runs best in 5.75" of water. Thus, if my sump's water level is 10", I set the skimmer on a 4.25" shelf (acrylic or eggcrate stand). The skimmer is very sensitive to water level, so I constantly add top up water to maintain the sump water level the same. Dropping the water level more than 1/2 causes the skimmer to pretty much shut down, and raising it even slightly causes the skimmer to fill up with pretty clear water that isn't skimmed much, if at all.

The skimmer is sensitive to the water level at the output, which creates back pressure in conjunction with adjusting the gate valve.

I added a 5" piece of spa hose and a pvc elbow with a couple of holes drilled in it (both from HD) so the skimmer output is under the sump water level to quiet splashing.

jabbott · 02/23/2013, 01:13 PM

Your talking about water level fluctuation due to you having the skimmer in a section of sump that doesn't maintain a constant water level. That is not the same as the working water level the skimmer needs to operate.
The section of sump the skimmer is in (any skimmer) needs to stay the same level all the times. (ie not the section with the pump, unless there's an auto top off system). Any skimmer when set for one water level will overflow or not work correctly when the water is raised up from where it was set.
The sro 2000 will work 100% in any water level from around 6" to 10" as long as the output was set for that level in the first place, there is no fluctuation in the chamber its in and the outlet pipe isn't fully covered.

becon776 · 12/14/2016, 11:48 PM

Yeah i sorry but that is just not true. Not true at all. Def not 6-10"

Sent from my SM-G935T using Tapatalk

02/22/2013, 09:33 AM	#1
mougliblore Registered Member Join Date: Feb 2012 Location: Bangalore Posts: 19	Water Level for Super Reef Octopus RO-PS-2000INT What is the optimal water level for Super Reef Octopus RO-PS-2000INT? I am currently curing my live rock using this. But I don't see it pulling much gunk as I expected. Also, The bubble levels in the filter cup keep going up and down all the time. What am I doing wrong?

02/23/2013, 12:51 PM	#8
Dr Colliebreath Registered Member Join Date: Apr 2011 Location: DC Vicinity Posts: 1,813	I have found mine runs best in 5.75" of water. Thus, if my sump's water level is 10", I set the skimmer on a 4.25" shelf (acrylic or eggcrate stand). The skimmer is very sensitive to water level, so I constantly add top up water to maintain the sump water level the same. Dropping the water level more than 1/2 causes the skimmer to pretty much shut down, and raising it even slightly causes the skimmer to fill up with pretty clear water that isn't skimmed much, if at all. The skimmer is sensitive to the water level at the output, which creates back pressure in conjunction with adjusting the gate valve. I added a 5" piece of spa hose and a pvc elbow with a couple of holes drilled in it (both from HD) so the skimmer output is under the sump water level to quiet splashing. __________________ Frank Current Tank Info: 110 Oceanic RR w/35 gal sump and SRO XP2000 int

02/22/2013, 09:39 AM	#2
hazey62 Registered Member Join Date: Feb 2013 Location: Ontario, Canada Posts: 129	water level is 5 3/4" for that skimmer. If the bubbles are going up and down it would suggest that your water level is going up and down?

02/22/2013, 09:52 AM	#3
jabbott Registered Member Join Date: Nov 2010 Location: Staten Island, NY Posts: 181	Their website says 5.75 inches, but the directions say 6-10 inches as long as the water outlet is not covered. http://coralvue.com/wp-content/uploa...ion-manual.pdf Personally I'm going to go with the guy who wrote the directions over the guy who wrote the website. Also the skimmer needs to be in a part of the sump where the water level doesn't change. So basically anywhere except the last chamber.

02/22/2013, 09:52 PM	#6
cap032 Registered Member Join Date: Dec 2011 Location: Alabama Posts: 611	Optimal depth is 5.75 inches. Much deeper and you will have overflowing issues.

02/23/2013, 01:13 PM	#9
jabbott Registered Member Join Date: Nov 2010 Location: Staten Island, NY Posts: 181	Your talking about water level fluctuation due to you having the skimmer in a section of sump that doesn't maintain a constant water level. That is not the same as the working water level the skimmer needs to operate. The section of sump the skimmer is in (any skimmer) needs to stay the same level all the times. (ie not the section with the pump, unless there's an auto top off system). Any skimmer when set for one water level will overflow or not work correctly when the water is raised up from where it was set. The sro 2000 will work 100% in any water level from around 6" to 10" as long as the output was set for that level in the first place, there is no fluctuation in the chamber its in and the outlet pipe isn't fully covered.

12/14/2016, 11:48 PM	#10
becon776 Registered Member Join Date: Mar 2003 Location: Irondequoit, ny Posts: 1,217	Yeah i sorry but that is just not true. Not true at all. Def not 6-10" Sent from my SM-G935T using Tapatalk