Dual Lumia 5.1 Build Questions

[FlyPenFly]

I plan to build a dual Lumia chip system with a Maker's heatsink, Maker's controller, and Maker's driver. How long of a heatsink is required for a dual chip solution? Can you guys recommend me a parts list?

Which parts would I need to make sure everything works, this is to light a clam and SPS heavy 24x24x24 tank.

[scubaprashant]

I had inquired once about the same thing. Here is the response that I received from LED Group Buy.

"The 6" heatsinks will work fine, but you can't mount the MakersDriver to them, you need 12" heatsinks to do that."

[dorky]

i go with the 24 or 36in just to be safe reason is heat and i don't know how good are the fan that come with it.

[80series]

Originally Posted by FlyPenFly

I plan to build a dual Lumia chip system with a Maker's heatsink, Maker's controller, and Maker's driver. How long of a heatsink is required for a dual chip solution? Can you guys recommend me a parts list?

Which parts would I need to make sure everything works, this is to light a clam and SPS heavy 24x24x24 tank.

FlyPenFly,

What length Maker's Heatsink did you decide on for your Dual Lumia 5.1 build?

I'm thinking about doing the same Dual build using a Maker's Heatsink.

Thanks...