if i have 2 Vortech mp10w , is it sufficient to run the NTM mode?

chercm · 02/08/2015, 06:42 PM

if i have 2 Vortech mp10w , is it sufficient to run the NTM mode? or i need to have 3 pumps ?

Spiffy · 02/08/2015, 06:45 PM

You can run one of them in NT mode if your on a small tank. I don't see why not.

chercm · 02/08/2015, 06:46 PM

i have a 2x2x2ft tank , plan to run the pump in ntm sync mode.

EcoTech Marine · 02/08/2015, 07:12 PM

Two pumps on a 2x2x2 in NTM mode will be perfect! Try running them with one pump set as the opposite side in NTM mode. The pumps will basically be in anti-sync and it should work really well. NTM is a great mode.

chercm · 02/08/2015, 07:13 PM

Quote:

Originally Posted by EcoTech Marine

Two pumps on a 2x2x2 in NTM mode will be perfect! Try running them with one pump set as the opposite side in NTM mode. The pumps will basically be in anti-sync and it should work really well. NTM is a great mode.

do you mean by setting in NTM mode, the pumps are defaulted in anti-sync mode ?

EcoTech Marine · 02/08/2015, 07:22 PM

Quote:

Originally Posted by chercm

do you mean by setting in NTM mode, the pumps are defaulted in anti-sync mode ?

In the two ES modes (NTM and Tidal Swell) the pumps don't have sync/anti-sync, instead the sync'd modes are based around which side of the tank the pump is on. So if the master is on the right side of the tank, you would set the first slave to orange which means it will run a program designed for a pump on the left side of the tank. If you have a third pump you could set it to run a program designed for a pump on the back side of the tank.

Check out more on page 19 here:

http://ecotechmarine.com/wp-content/...evision1.3.pdf

chercm · 02/08/2015, 07:31 PM

Quote:

Originally Posted by EcoTech Marine

In the two ES modes (NTM and Tidal Swell) the pumps don't have sync/anti-sync, instead the sync'd modes are based around which side of the tank the pump is on. So if the master is on the right side of the tank, you would set the first slave to orange which means it will run a program designed for a pump on the left side of the tank. If you have a third pump you could set it to run a program designed for a pump on the back side of the tank.

Check out more on page 19 here:

http://ecotechmarine.com/wp-content/...evision1.3.pdf

sorry how do you set the slave to orange LED ?

EcoTech Marine · 02/08/2015, 07:35 PM

First you assign it as a slave pump then hit mode.

chercm · 02/16/2015, 05:59 PM

How to get the wave to form using 2 mp10wes ? I tried to use the auto tune function but it ran the whole program did not seems to get a wave . I setup the mp10 opposite each other

chercm · 02/17/2015, 06:33 AM

Anyone can help?

02/08/2015, 06:42 PM	#1
chercm Registered Member Join Date: Apr 2006 Location: Singapore Posts: 2,971	if i have 2 Vortech mp10w , is it sufficient to run the NTM mode? if i have 2 Vortech mp10w , is it sufficient to run the NTM mode? or i need to have 3 pumps ?

02/08/2015, 06:45 PM	#2
Spiffy Cheesy Poofs! Join Date: May 2014 Location: Bronx, New York Posts: 357	You can run one of them in NT mode if your on a small tank. I don't see why not. __________________ Ecotech Radion XR15 Pro Gen3 x2, ReefLink, CPR CS50 Overflow. Reef Octopus NWB 110 Skimmer, Reef Octopus BR-110 Reactor. VorTech MP40 w/ QD Wetside x2, MP10 x1(Sump), 30-Gallon Sump. Current Tank Info: 60 Gallon, Prepping for LPS, 6 Years.

02/08/2015, 07:12 PM	#4
EcoTech Marine RC Sponsor Join Date: Sep 2005 Location: Allentown, PA Posts: 4,870	Two pumps on a 2x2x2 in NTM mode will be perfect! Try running them with one pump set as the opposite side in NTM mode. The pumps will basically be in anti-sync and it should work really well. NTM is a great mode. __________________ Tim Marks President EcoTech Marine www.ecotechmarine.com If the above information doesn't help you, please contact us at 1-800-785-0338 ext. 2 or by e-mailing [email]support@ecotech

02/08/2015, 07:35 PM	#8
EcoTech Marine RC Sponsor Join Date: Sep 2005 Location: Allentown, PA Posts: 4,870	First you assign it as a slave pump then hit mode. __________________ Tim Marks President EcoTech Marine www.ecotechmarine.com If the above information doesn't help you, please contact us at 1-800-785-0338 ext. 2 or by e-mailing [email]support@ecotech

02/08/2015, 06:46 PM	#3
chercm Registered Member Join Date: Apr 2006 Location: Singapore Posts: 2,971	i have a 2x2x2ft tank , plan to run the pump in ntm sync mode.

02/16/2015, 05:59 PM	#9
chercm Registered Member Join Date: Apr 2006 Location: Singapore Posts: 2,971	How to get the wave to form using 2 mp10wes ? I tried to use the auto tune function but it ran the whole program did not seems to get a wave . I setup the mp10 opposite each other

02/17/2015, 06:33 AM	#10
chercm Registered Member Join Date: Apr 2006 Location: Singapore Posts: 2,971	Anyone can help?