Reef Central Online Community

Go Back   Reef Central Online Community > General Interest Forums > New to the Hobby
Blogs FAQ Calendar

Notices

User Tag List

Reply
Thread Tools
Unread 04/19/2017, 09:03 AM   #1
gjustinj
Registered Member.
 
Join Date: Apr 2017
Location: Pittsburgh, PA
Posts: 192
Salt Mixing Q 2.5 cups per 5G bucket? Cleaning Routine

Hi Guys,

I am pretty excited as I think I get to add a pair of clowns in my tank tonight! But I am also concerned, because right after my cycle was completed I did a 50 Gallon water change, and when I did that I ended up pretty short on my salinity (I just purchased the refractometer). I understand that being even 2 points off can cause stress to fish or potentially kill it so this is the scariest part for me, because i do not want to lose my tank when doing 10-15% weekly water changes.

I asked around and it seems the going number is 2.5 cups per 5G bucket - is that true? I want to make sure I know exactly what number it is to help prevent wiping out my tank.

Also I heard that as long as you are doing 10-15% weekly changes, your filter (canister) only needs cleaned once every month or two. Also, your protein skimmer should be cleaned out daily. Is this all true?

Sorry for all of the questions and separate posts lately - im just trying to keep it a bit organized for myself


gjustinj is offline   Reply With Quote
Unread 04/19/2017, 09:12 AM   #2
WatDatThing
Registered Member
 
Join Date: Dec 2016
Posts: 830
Before putting new water into the tank, you should check to make sure the salinity is the same. This may require bring the temperature up to tank temperature depending on the volume.
Regarding the canister filter, I clean it every time I do a wc. It only take 5 minutes.

Sent from my Moto G (4) using Tapatalk


WatDatThing is offline   Reply With Quote
Unread 04/19/2017, 09:56 AM   #3
gjustinj
Registered Member.
 
Join Date: Apr 2017
Location: Pittsburgh, PA
Posts: 192
Thanks! Yes I Def am doing my best at getting it right I'm just trying to figure out a system to help my numbers get there easier and less of chance of failure within my means


gjustinj is offline   Reply With Quote
Unread 04/19/2017, 10:14 AM   #4
mcgyvr
Registered Member
 
mcgyvr's Avatar
 
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
In general many salts are 1/2C per gallon.. BUT only use that as a generic recommendation and ALWAYS test salinity before putting that water into the tank..

And there are no hard/fast rules for anything..
Clean filters when needed... Clean skimmer cup when needed..
I only need to dump the skimmer cup maybe once a week as I skim pretty "dry" so it takes that long to fill up the cup..
Someone could be skimming wet and need to empty the cup daily or hourly or whatever..

You need to understand whats required to maintain and a tank and DO NOT follow any generic guidelines (other than parameter wise) like you seem to be thinking you need to..

So get the salinity back up to 1.025-1.026 and go from there..

Read..Learn...Think..Understand.. Adapt/Adjust... That what makes you a human..


__________________
Who me?
mcgyvr is offline   Reply With Quote
Unread 04/19/2017, 10:20 AM   #5
gjustinj
Registered Member.
 
Join Date: Apr 2017
Location: Pittsburgh, PA
Posts: 192
Quote:
Originally Posted by mcgyvr View Post
In general many salts are 1/2C per gallon.. BUT only use that as a generic recommendation and ALWAYS test salinity before putting that water into the tank..

And there are no hard/fast rules for anything..
Clean filters when needed... Clean skimmer cup when needed..
I only need to dump the skimmer cup maybe once a week as I skim pretty "dry" so it takes that long to fill up the cup..
Someone could be skimming wet and need to empty the cup daily or hourly or whatever..

You need to understand whats required to maintain and a tank and DO NOT follow any generic guidelines (other than parameter wise) like you seem to be thinking you need to..

So get the salinity back up to 1.025-1.026 and go from there..

Read..Learn...Think..Understand.. Adapt/Adjust... That what makes you a human..
Thanks! Yea I believe as I start to get into it I will learn more hands on but I'm still really new without any fish in there so I am trying to find 'general rules' to start with. Appreciate it


gjustinj is offline   Reply With Quote
Unread 04/19/2017, 12:43 PM   #6
TYC
Registered Member
 
TYC's Avatar
 
Join Date: Feb 2016
Location: Central NJ
Posts: 237
generally it's 1 cup of salt for every 2 gallons of water. The new water should always be tested/made for same salinity and temp as your display tank prior to doing the water change to avoid such parameter changes. Good luck, just be patient and go slow to avoid future headaches.


TYC is offline   Reply With Quote
Unread 04/19/2017, 01:48 PM   #7
gjustinj
Registered Member.
 
Join Date: Apr 2017
Location: Pittsburgh, PA
Posts: 192
Tyc that sounds right to the 2.5 per 5g bucket but as everyone says it's always best to measure to make sure


gjustinj is offline   Reply With Quote
Unread 04/19/2017, 01:51 PM   #8
Potatohead
Registered Member
 
Potatohead's Avatar
 
Join Date: Apr 2016
Location: Vancouver
Posts: 1,596
A 5g bucket holds more like 5.75 gallons. Always, always check salinity before doing a water change. You will also need to make sure the newly mixed water is also the same temp as the display for checking.


Potatohead is offline   Reply With Quote
Unread 04/19/2017, 04:38 PM   #9
aaronwitt
Registered Member
 
Join Date: Aug 2016
Posts: 62
I'll usually start around 2-2.5 cups and then measure it after it mixes and adjust it to the salinity that I keep my tank at. I also put a heater in there while it's mixing to bring the water temperature to the same as my tank like people have said as well.


aaronwitt is offline   Reply With Quote
Unread 04/19/2017, 07:37 PM   #10
riz94107
Registered Member
 
Join Date: Mar 2017
Location: San Francisco
Posts: 19
Quote:
Originally Posted by Potatohead View Post
A 5g bucket holds more like 5.75 gallons. Always, always check salinity before doing a water change. You will also need to make sure the newly mixed water is also the same temp as the display for checking.
I was pretty sure this was true, too, but I recently measured two of my buckets (by weight), and they both came out at nearly exactly 5gal! I guess the point is - check!

Sent from my SM-G900T using Tapatalk


riz94107 is offline   Reply With Quote
Unread 04/19/2017, 09:56 PM   #11
Bikerharold
Registered Member
 
Bikerharold's Avatar
 
Join Date: Apr 2016
Location: Whitby, Ontario Canada
Posts: 57
Be sure to follow the recommendations that come with the salt you purchase. And test after mixing to make sure readings are correct. Its easier to do it right the first time instead of trying to fix a problem you created. Cheaper to. Good luck, been there and done that.


Bikerharold is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2025 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.