|
|
|
01/01/2018, 05:06 AM
|
#1 |
|
Registered Member
Join Date: Feb 2008
Location: Bangkok, Thailand
Posts: 9
|
Apex Fusion Salt probe
Didnt see equipment or Controler forum....
Any way ! I reset my router , Apex 2016 unit Now Salt probe reading Zero !! Does Not need re calibration as no paramaters have changed .. Thanks and Happy New Year ! Sent from my SM-T715Y using Tapatalk |
|
|
|
01/01/2018, 08:06 AM
|
#2 |
|
Ver. 2.1
 
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
If all you did was to reset you router, then that shouldn't have any effect on the salinity probe.
Try logging out of Fusion, clear your browser history and cache, then log back in. Can you log into your Apex local using it's IP address? There is a Neptune forum down the bottom in the Sponsor Forums http://reefcentral.com/forums/forumdisplay.php?f=368 Also try here... https://forum.neptunesystems.com/forum.php
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
|
|
|
|
01/01/2018, 10:27 AM
|
#3 |
|
Registered Member
Join Date: Aug 2001
Location: California
Posts: 2,259
|
What @Member No. 1 said - there is a Neptune forum plus they have a pretty active forum of their own. Resetting router shouldn't cause that. You could try to disconnect probe and also verify connection is good with no corrosion.
I was reading about the salinity probe on their site and saw a couple posts but most are around the best method of calibration.
__________________
-saf1 Current Tank Info: 210 gallon mixed reef |
|
|
|
|
01/01/2018, 04:09 PM
|
#4 |
|
Registered Member
Join Date: Feb 2008
Location: Bangkok, Thailand
Posts: 9
|
Thanks
Sent from my SM-J730GM using Tapatalk |
|
|
|
 |
|
|
