Digital Aquatics ReefKeeper Question

fishgate · 03/13/2021, 09:02 AM

Is there a temperature adjustment on the Reefkeeper Elite? I got the below probe and it works great but is about a degree off. I am hoping there is some way to calibrate the temperature probe.

Also does anyone know what the temp connector plug type is called? I cut my old DA probe connector off and spliced it to this one but I'd like to get a couple new connectors for the probes.

TIA!

https://www.amazon.com/gp/product/B0185P4MVO/

ROlympia · 03/13/2021, 10:42 AM

Yes. Menu, down to Module, RKL, Itemp, Calibrate, then set your temperature, Enter, Enter (will return you to "calibrate" when it's done).

ROlympia · 03/13/2021, 10:43 AM

PS. It seems to work best when it's calibrated when the tank is around 77 degrees.

ROlympia · 03/13/2021, 10:45 AM

Sorry, another P.S. The connector is an RJ-11 I believe.

ROlympia · 03/13/2021, 10:46 AM

https://premiumaquatics.com/products...onnection.html

fishgate · 03/13/2021, 12:50 PM

Thank you! I went right through that section and for some reason didn't see it. I set it for what the tank is actually at and once it increases a few degrees, I'll set it again.

This is Reefkeeper Elite - It is a Molex 0436450200 connector.

03/13/2021, 09:02 AM	#1
fishgate Registered Member Join Date: Oct 2011 Location: Damascus, MD Posts: 3,340	Digital Aquatics ReefKeeper Question Is there a temperature adjustment on the Reefkeeper Elite? I got the below probe and it works great but is about a degree off. I am hoping there is some way to calibrate the temperature probe. Also does anyone know what the temp connector plug type is called? I cut my old DA probe connector off and spliced it to this one but I'd like to get a couple new connectors for the probes. TIA! https://www.amazon.com/gp/product/B0185P4MVO/ __________________ 125RR in-wall, 40B Sump, CS180 BM Skimmer, ATI 4x80 watt, eheim 1262, custom wrap around rock wall, ReefKeeper Elite 120g in-wall, 40B Sump, PC 54wx4, Jabao DC-6000 (full siphon), future seahorse t Current Tank Info: 125g, 120g, 2x40b sumps, ATI 4x80 T5HO

03/13/2021, 12:50 PM	#6
fishgate Registered Member Join Date: Oct 2011 Location: Damascus, MD Posts: 3,340	Thank you! I went right through that section and for some reason didn't see it. I set it for what the tank is actually at and once it increases a few degrees, I'll set it again. This is Reefkeeper Elite - It is a Molex 0436450200 connector. __________________ 125RR in-wall, 40B Sump, CS180 BM Skimmer, ATI 4x80 watt, eheim 1262, custom wrap around rock wall, ReefKeeper Elite 120g in-wall, 40B Sump, PC 54wx4, Jabao DC-6000 (full siphon), future seahorse t Current Tank Info: 125g, 120g, 2x40b sumps, ATI 4x80 T5HO

03/13/2021, 10:42 AM	#2
ROlympia Registered Member Join Date: Sep 2017 Posts: 138	Yes. Menu, down to Module, RKL, Itemp, Calibrate, then set your temperature, Enter, Enter (will return you to "calibrate" when it's done).

03/13/2021, 10:43 AM	#3
ROlympia Registered Member Join Date: Sep 2017 Posts: 138	PS. It seems to work best when it's calibrated when the tank is around 77 degrees.

03/13/2021, 10:45 AM	#4
ROlympia Registered Member Join Date: Sep 2017 Posts: 138	Sorry, another P.S. The connector is an RJ-11 I believe.

03/13/2021, 10:46 AM	#5
ROlympia Registered Member Join Date: Sep 2017 Posts: 138	https://premiumaquatics.com/products...onnection.html