Phosban Reactor

tbone28 · 06/05/2007, 02:55 PM

What is the footprint of the phosban reactor?

I'm designing my sump right now, and space is tight.

Thanks

old95er · 06/05/2007, 03:11 PM

if it hangs into the sump, then you need minimum 4"x4", without counting the space for tubing and the little pump (I use the maxijet 404)

If you hang it outside the sump, then you only need the space for the in/out tubing and the little pump.

In my setup, it hangs in the return section of the sump.

tbone28 · 06/05/2007, 03:19 PM

Perfect, thanks for the quick response!

I'll be placing it inside my sump as well. It's a very small footprint!

06/05/2007, 02:55 PM	#1
tbone28 Registered Member Join Date: Aug 2003 Location: Bay Area, CA Posts: 6,503	Phosban Reactor What is the footprint of the phosban reactor? I'm designing my sump right now, and space is tight. Thanks

06/05/2007, 03:11 PM	#2
old95er Premium Member Join Date: Apr 2004 Location: Connecticut Posts: 462	if it hangs into the sump, then you need minimum 4"x4", without counting the space for tubing and the little pump (I use the maxijet 404) If you hang it outside the sump, then you only need the space for the in/out tubing and the little pump. In my setup, it hangs in the return section of the sump. __________________ Click the red house. . .check out the new 120. . .tell me what you think! Current Tank Info: 120. . .lumenarc stealth x 2, 10k Ushio DE 250w, DIY sump, mag18 return, with refugium,AquaC EV180 with Mag7, Dart /OM 4 way CL, JBJ 1/10hp Chiller, Fishbowl Innovations Moonlightsx2, Oceanus Poseidon ATO fr RO/DI, ozotech poseidon

06/05/2007, 03:19 PM	#3
tbone28 Registered Member Join Date: Aug 2003 Location: Bay Area, CA Posts: 6,503	Perfect, thanks for the quick response! I'll be placing it inside my sump as well. It's a very small footprint!