![]() |
![]() |
![]() |
#1 |
Registered Member
![]() Join Date: Feb 2009
Location: Omaha, NE
Posts: 16
|
UV Sterlizer Q???
Hey everyone,
I was able to acquire a UV sterilizer from the LFS used and had a couple of questions. Its a Current 15w with a maxi jet 1200 feeding it. First, does it need to run all of the time? 2nd, I have heard you never need to change the light only when it burns out? So from what I found so far after having it run for 2 weeks with the used bulb that was in it that it seemed to sterlize fairly good. I went ahead and ordered a new bulb because I did not know the age of the bulb nor any way to measure the output of the light intensity. Now the manufacture recommends every 6 months but that seems excessive. As for running all of the time, thats the way I have it configured now but it just seems that to conserve the heat generated that I might be able to run it after the lights are out. Hope these aren't weak questions but I am very ignorant on the UV end. System its on is a 90 gallon starter reef, with 9 fish. Thanks in advance. ![]() |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Aug 2007
Location: Denison, TX
Posts: 51
|
replace a gamma once a year and i run mine constantly on but you can run it on a on/off cycle
|
![]() |
![]() |
![]() |
#3 |
Registered Member
![]() Join Date: Feb 2009
Location: Omaha, NE
Posts: 16
|
Thanks Dustin...
|
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Apr 2008
Location: wisconsin
Posts: 62
|
I ran mines till it died out on me.
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
|
|