ASM G3 in 75g Pine Majesty Stand

FormulatedFire · 03/20/2011, 08:53 PM

I'm planning on buying an ASM G3, but I'm worried that I won't be able to squeeze it under my stand and then into my sump since my tank is already up and running. I'm running a 75G RR with a 30G sump underneath(pushed all the way back of stand with decent clearance in the front entrance). The stand is the normal pine majesty stand that usually comes with tanks.

So my main question is does anyone else have a setup similar to mine that takes their G3 out and cleans it all out on a regular basis.

Also if anyone has the schematic dimensions of a G3(cylinder,base,pump). Basically all over dimensions.

goochesfish · 03/20/2011, 10:31 PM

base 11x12 inches
height 25 inches, diameter 6.5 inches

my stand is not similar but after pulling of the cup, you can disconnect the pump before pulling out the pump so you don't have to pull the whole skimmer out. I had it in a compartment that was 11 x 14 inches

Anemonebuff · 03/21/2011, 01:28 AM

I had to drain my sump and pull it out, add the skimmer, slide it back under, and refill it. It would not fit between the stand and the top of the sump.

FormulatedFire · 03/21/2011, 09:22 AM

Quote:

Originally Posted by Anemonebuff

I had to drain my sump and pull it out, add the skimmer, slide it back under, and refill it. It would not fit between the stand and the top of the sump.

Any chance you could post a pic up of your sump area so I can see how close yours resembles mine. I'm thinking I won't be able to take my sump tank out.

Anemonebuff · 03/22/2011, 08:34 AM

Anemonebuff · 03/22/2011, 08:36 AM

It's under a 125 Gallon AGA pine stand.

03/20/2011, 08:53 PM	#1
FormulatedFire Registered Member Join Date: Jan 2006 Location: Glen Burnie, MD Posts: 138	ASM G3 in 75g Pine Majesty Stand I'm planning on buying an ASM G3, but I'm worried that I won't be able to squeeze it under my stand and then into my sump since my tank is already up and running. I'm running a 75G RR with a 30G sump underneath(pushed all the way back of stand with decent clearance in the front entrance). The stand is the normal pine majesty stand that usually comes with tanks. So my main question is does anyone else have a setup similar to mine that takes their G3 out and cleans it all out on a regular basis. Also if anyone has the schematic dimensions of a G3(cylinder,base,pump). Basically all over dimensions.

03/20/2011, 10:31 PM	#2
goochesfish Registered Member Join Date: Feb 2008 Location: Los Angeles Posts: 1,305	base 11x12 inches height 25 inches, diameter 6.5 inches my stand is not similar but after pulling of the cup, you can disconnect the pump before pulling out the pump so you don't have to pull the whole skimmer out. I had it in a compartment that was 11 x 14 inches __________________ The Gooch, my Beagle, may she RIP 1995-2011 Current Tank Info: 150 gallon Starfire set up July 22,09, 30g QT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modifying a Perfecto Pine Majesty Stand	jt48	Reef Discussion	0	06/04/2010 08:45 PM
75g pine stand/tank and some sand.	KurtsReef	Upstate Reef Society	13	08/11/2008 08:27 PM
FS: 75g tank/stand ASM G3, Sump, Iwaki pump	FoothillCorals	Marine Aquarists Roundtable of Sacramento (MARS)	9	05/03/2008 11:38 PM
75 Gallon Asm G2 Or Asm G3	FISHMAN211	New to the Hobby	1	10/22/2006 01:08 PM

03/21/2011, 01:28 AM	#3
Anemonebuff Registered Member Join Date: Feb 2001 Location: LI,NY Posts: 3,877	I had to drain my sump and pull it out, add the skimmer, slide it back under, and refill it. It would not fit between the stand and the top of the sump.

03/22/2011, 08:34 AM	#5
Anemonebuff Registered Member Join Date: Feb 2001 Location: LI,NY Posts: 3,877

03/22/2011, 08:36 AM	#6
Anemonebuff Registered Member Join Date: Feb 2001 Location: LI,NY Posts: 3,877	It's under a 125 Gallon AGA pine stand.