|
01/26/2017, 06:40 AM | #1 |
Registered Member
Join Date: Apr 2004
Posts: 51
|
Phospate level in RO water
Hi all.
I currently have phosphate levels of 0.08 measured by the Hanna ultra low phosphorous checker. I was a little dismayed to find that my ATO RO reservoir water had phosphate levels of 0.0245. I have recently changed my RO unit filters and TDS is 0. I only have a small tank and a large ATO reservoir so the reservoir water can be in there for 4 weeks before it is used. The reservoir is in a sunny room so the question is would phosphates increased naturally over time in the reservoir? The water is left to stand and is not aerated. Thanks in advance |
01/26/2017, 09:06 AM | #2 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Put some fresh RO water into a clean glass.. Check it for phosphate level..
report back.. Is the ATO container sealed? Could be phosphates leaching from the plastic of the ATO container I guess..
__________________
Who me? |
01/26/2017, 11:41 AM | #3 |
Registered Member
Join Date: Apr 2004
Posts: 51
|
Will do a fresh batch at the weekend. The container is not sealed and the container is plastic.
|
01/26/2017, 06:58 PM | #4 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
That level is close to the error limit for the device, and there might be a bit of organic debris or other contamination in the container. I might try wiping the reservoir down with a bit of vinegar. I agree that testing some water straight from the filter might help pin down any possible source of phosphate.
__________________
Jonathan Bertoni |
01/27/2017, 06:48 PM | #5 |
Registered Member
Join Date: Nov 2009
Location: Reseda, Ca.
Posts: 1,717
|
according to hanna, they list the 736 as a "marine" phosphorus meter. I have been using this checker for many years but I'm not too sure that it's accurate in fresh water. When I've tested fresh water (from the tap and my ro'di reservoir) it seems accurate but I wouldn't make a bet on that. Maybe call hanna and ask them if it's accurate in fresh water.
|
01/27/2017, 08:23 PM | #6 |
Registered Member
Join Date: Jul 2009
Location: Iowa
Posts: 9,671
|
Hanna has stated in a reply to a question I sent to them that the 736 is not accurate for freshwater.
__________________
rebuild and recovery log: No more red house, you'll have to click on my name and visit my homepage! You can check out my parameters at reeftronics dot net website and look for my username. Current Tank Info: 180g mixed reef w/ a beananimal overflow to a dolomite RRUGF. | 20g long G. Smithii Mantis Tank |
01/27/2017, 10:27 PM | #7 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
Oops, I agree that the HI 736 is rated only for saltwater. I missed that.
__________________
Jonathan Bertoni |
01/29/2017, 02:04 PM | #8 |
Registered Member
Join Date: Apr 2004
Posts: 51
|
Wow. Thanks for the help guys. I would have wasted a lot of time and cash chasing something that possibly doesn't exist. Large water change time methinks.
|
01/29/2017, 02:18 PM | #9 | |
Registered Member
Join Date: Aug 2014
Posts: 1,432
|
Quote:
The test chemistry is sensitive to pH. Without the buffering of seawater, the test solution acidity in freshwater is possibly too low for the color development. So, that means no detection or underestimation of phosphates. |
|
Thread Tools | |
|
|