Schuran J1, Help Please...

Gino555 · 12/29/2006, 03:55 PM

Hi Guys,
Please help me, if somebody knows where the problem come from:
-my water level in the chamber goes down about 1in per day, and I am disconecting tubing, and add refill with the water EVERYDAY, to keep the level about 1/2 in from the top.
Also, I am using Cole-Palmer (50ml/m), with double head,it means that I am not just pulling water from the chamber, I am also pushing water to it with the same flow rate,because the head is one,and the size of the tubbing same.
Last weekend I disconect everything and put new liner on all joints (weldone 16). Still have same problem.

Thanks, for reading post, and if somebody knows any idea how to fix it.

Gino555 · 12/29/2006, 08:48 PM

No one?

Emster · 12/29/2006, 09:00 PM

Does the water go below the feed holes? It should stop at the feed holes. alot of guys run it this way. There is a jetstream1 thread, tryand do a search.

Gino555 · 12/29/2006, 09:22 PM

I didnot try to wait until its going to low.

jdieck · 12/29/2006, 09:33 PM

Is your reactor at a hgier level than the effluent line output?
Also test reducing the amount of CO2 being injected. If too much it might exceed the capacity of the recirculator.

12/29/2006, 03:55 PM	#1
Gino555 Registered Member Join Date: Oct 2004 Location: Brooklyn, NY Posts: 99	Schuran J1, Help Please... Hi Guys, Please help me, if somebody knows where the problem come from: -my water level in the chamber goes down about 1in per day, and I am disconecting tubing, and add refill with the water EVERYDAY, to keep the level about 1/2 in from the top. Also, I am using Cole-Palmer (50ml/m), with double head,it means that I am not just pulling water from the chamber, I am also pushing water to it with the same flow rate,because the head is one,and the size of the tubbing same. Last weekend I disconect everything and put new liner on all joints (weldone 16). Still have same problem. Thanks, for reading post, and if somebody knows any idea how to fix it.

12/29/2006, 09:00 PM	#3
Emster Registered Member Join Date: Dec 2004 Location: Largo, FL Posts: 2,364	Does the water go below the feed holes? It should stop at the feed holes. alot of guys run it this way. There is a jetstream1 thread, tryand do a search. __________________ Emmett Jan. 09 TOTM Current Tank Info: 180 gal, Iwaki 70, 4-3/4" sea swirls, 3-400 watt Radiums, 4-80watt T-5's , custom Ca reactor, 1/3hp aqualogic chiller, i-Tech 400, Tunze osmolator

12/29/2006, 09:33 PM	#5
jdieck Registered Member Join Date: Dec 2002 Location: Maumee, OH Posts: 15,673	Is your reactor at a hgier level than the effluent line output? Also test reducing the amount of CO2 being injected. If too much it might exceed the capacity of the recirculator. __________________ Did I write what I wrote? What the heck am I talking about! Well..... Nevermind. Current Tank Info: 225 gal reef, DSB, 40 g sump w/ LRT100 return, 37 g pre-sump, 3 MH 250 W 15K, 4 96 W PC dual actinic,ETS 1500 Skim.w/LRT70, 20 lb Ca R., 40 W UV, 1/3 HP chiller, two 350 W Htrs, Neptune II Cont., 330 P LR/ 330 P LS. 55 gal Refugium

12/29/2006, 08:48 PM	#2
Gino555 Registered Member Join Date: Oct 2004 Location: Brooklyn, NY Posts: 99	No one?

12/29/2006, 09:22 PM	#4
Gino555 Registered Member Join Date: Oct 2004 Location: Brooklyn, NY Posts: 99	I didnot try to wait until its going to low.