|
10/25/2012, 07:04 AM | #1 |
Registered Member
Join Date: Oct 2011
Location: Damascus, MD
Posts: 3,340
|
Upgrading to a larger tank
I really want to move to my now freed up 46g bowfront from my 40g breeder. My plan is to setup the 46g, let it run/cycle for at least a month, then transfer the occupants of my 40b over a period of a couple of weeks. I am not concerned about the CUC but I am concerned about my 2 mated, very happy, very healthy percula clowns. Also have 2 pajama cardinals. How well do they tolerate moves? I will make sure the new tank is as close in water params as the old one but I am just a little concerned about the stresses of moving.
I am moving partly because I am sure the current 40B that is in my office with wood floors is ruining the floor and I want to get it out of here post haste.
__________________
125RR in-wall, 40B Sump, CS180 BM Skimmer, ATI 4x80 watt, eheim 1262, custom wrap around rock wall, ReefKeeper Elite 120g in-wall, 40B Sump, PC 54wx4, Jabao DC-6000 (full siphon), future seahorse t Current Tank Info: 125g, 120g, 2x40b sumps, ATI 4x80 T5HO |
10/25/2012, 08:05 AM | #2 |
Registered Member
Join Date: Sep 2008
Location: GA
Posts: 89
|
Do you have a good amount of live rock in your 40 that you can transfer over? If so I would just transfer everything but the substrate over at once (use new substrate except maybe a cup or two IMO). The clowns and pajama cardinals are hardy fish. Shouldn't be any problem.
__________________
And with just one faint glance, back into the sea The mollusk lingers, with it's wandering eye... Current Tank Info: 29 mixed, 100g not set-up |
10/25/2012, 09:04 AM | #3 | |
Registered Member
Join Date: Sep 2009
Location: Minnetonka, MN
Posts: 582
|
Quote:
If you've got a lot of sponges on the live rock, try to minimize their exposure to air to prevent a lot of dieoff during the move. Besides, there will probably be snails and/or crabs hiding in the rocks that won't appreciate being out of the water for long. |
|
10/25/2012, 11:28 AM | #4 | |
Registered Member
Join Date: Oct 2011
Location: Damascus, MD
Posts: 3,340
|
Quote:
I hadn't planned on using the old substrate since it is a mix of crushed coral. I was going with 100% aragonite in the new tank.
__________________
125RR in-wall, 40B Sump, CS180 BM Skimmer, ATI 4x80 watt, eheim 1262, custom wrap around rock wall, ReefKeeper Elite 120g in-wall, 40B Sump, PC 54wx4, Jabao DC-6000 (full siphon), future seahorse t Current Tank Info: 125g, 120g, 2x40b sumps, ATI 4x80 T5HO |
|
10/25/2012, 11:53 AM | #5 |
Premier World Traveler
Join Date: Nov 2000
Location: Ohio
Posts: 4,293
|
I put all the rock, corals, fish etc... from my 120 into a couple smaller tanks, (you could use a rubbermaid tub, trash can etc...) while tranfering everything into my 210 a little over a year ago. I rinsed all of the old sand well, and combined with a few more bags of clean, new, well rinsed , CaribSea aragonite, mixed up fresh Reef Crystals to match the holding tanks, and moved everything back in over the course of a week. No need to stress out over your move, and I'd reccomend doing it directly, no need to "run/cycle" anything. Unless the sand you use has a lot of organics, and it shouldn't... especially after you rinse it well, there is no cycle. Your live rock, and etc... will seed the new stuff with few issues in my experience. I did the upgrade exactly the same when I moved from my 25yo Oceanic 30, and 58 into the 120. It works like this, your old rock already has the capacity to handle your bio-load. Assuming you don't add a boat load of organics to decay and cause a cycle, the new system simply adjusts to the new expanse. In your case, moving from a 40 to a 46 there is very little difference anyway.
__________________
"The moment you doubt whether you can fly, you cease forever to be able to do it..." J.M. Barrie Current Tank Info: 210 AGA RR, Apex, 3x Kessil A360W & 2x 80W T5s, GEO 618 Ca Rx, BM220 CS2 skimmer, Tunze 6100s, 42" ETSS/AE Tech refugium/sump |
10/26/2012, 07:51 AM | #6 |
Registered Member
Join Date: Oct 2011
Location: Damascus, MD
Posts: 3,340
|
Thanks. I'll be going from around 45g capacity to 66g. The old sump has about 5 gallons of water and the new sump will be the old 40b filled 1/2 way. So I'll get a lot more sump volume out of it.
__________________
125RR in-wall, 40B Sump, CS180 BM Skimmer, ATI 4x80 watt, eheim 1262, custom wrap around rock wall, ReefKeeper Elite 120g in-wall, 40B Sump, PC 54wx4, Jabao DC-6000 (full siphon), future seahorse t Current Tank Info: 125g, 120g, 2x40b sumps, ATI 4x80 T5HO |
10/26/2012, 08:27 AM | #7 |
Premier World Traveler
Join Date: Nov 2000
Location: Ohio
Posts: 4,293
|
IMO it's still not a big deal. Your existing, plus the additional cured live rock has the capacity to carry the existing bio-load and then some. Moving to a somewhat larger volume of water won't change that. On the contrary, it will add stability to your system.
__________________
"The moment you doubt whether you can fly, you cease forever to be able to do it..." J.M. Barrie Current Tank Info: 210 AGA RR, Apex, 3x Kessil A360W & 2x 80W T5s, GEO 618 Ca Rx, BM220 CS2 skimmer, Tunze 6100s, 42" ETSS/AE Tech refugium/sump |
Thread Tools | |
|
|