~Apex WXM Programs~

Clownin Aroun · 03/31/2013, 07:00 AM

After recieving my Apex and setting up my WXM i did a lot of research to see what programs people had created for their WXM modules. I only found one every now and then and found that there was no one thread where everyone posted what they do......this could be a huge help to someone setting up theirs for the first time, or someone who has had it but is looking for a change!

Well Anyway heres mine......Please leave your program!

I have One MP40 On each side facing one another

Right MP40 (set to Master)

Fallback Tidal
Set ON
If Time 07:00 to 09:00 Then SPulse
If Time 09:00 to 10:00 Then Lagoon
If Time 10:00 to 11:00 Then Lagoon
If Time 11:00 to 13:00 Then SPulse
If Time 14:00 to 15:00 Then Tidal
If Time 15:00 to 18:00 Then Nutrient
If Time 18:00 to 20:00 Then Tidal
If Time 20:00 to 22:00 Then LPulse
If Time 22:00 to 07:00 Then Nutrient

Left MP40

Fallback Tidal
Set AntiSync
If Time 10:00 to 11:00 Then Sync
If Time 11:00 to 12:00 Then Sync

Dustin1300 · 03/31/2013, 07:04 AM

Both MP40s on my 140 gallon frag tank set up on same side wall and have following program:

Fallback ON
Set RfCrest
If Time 00:00 to 06:00 Then Night
If Time 06:00 to 06:30 Then Nutrient
If Time 06:30 to 12:00 Then RfCrest
If Time 12:00 to 12:30 Then Nutrient
If Time 12:30 to 18:00 Then RfCrest
If Time 18:00 to 18:30 Then Nutrient
If Time 18:30 to 22:00 Then RfCrest
If Time 22:00 to 22:30 Then Nutrient
If Time 22:30 to 24:00 Then Night
If FeedA 000 Then Feed

takayan · 05/20/2013, 01:08 PM

These Profile entries such as Nigh, Nutrient, RfCrest and etc are preset setting?
There is a table in Apex WXM manual like below. In this case, ReefCrst's max intensity 100%. Can I change it to 80% max? If it can be changed, how can it be changed?
Profile Name Mode Notes
ReefCrst Reef Crest Max Intensity 100%
TidalSwl Tidal Swell Max Intensity 80%
Nutrient Nutrient Export Max Intensity 90%
Pulse Pulse Max Intensity 100%, on time to 0.55 seconds
Night Constant Max Intensity 50%
Sync Synchronize Max Intensity 100%, sync to VorTechLeft
Anti-Sync Anti-sync Max Intensity 100%, anti-sync to VorTechLeft
Slow Constant Max Intensity 25%

03/31/2013, 07:00 AM	#1
Clownin Aroun YouTube name- KNGRNGS Join Date: Jul 2011 Location: Monmouth County, NJ Posts: 314	~Apex WXM Programs~ After recieving my Apex and setting up my WXM i did a lot of research to see what programs people had created for their WXM modules. I only found one every now and then and found that there was no one thread where everyone posted what they do......this could be a huge help to someone setting up theirs for the first time, or someone who has had it but is looking for a change! Well Anyway heres mine......Please leave your program! I have One MP40 On each side facing one another Right MP40 (set to Master) Fallback Tidal Set ON If Time 07:00 to 09:00 Then SPulse If Time 09:00 to 10:00 Then Lagoon If Time 10:00 to 11:00 Then Lagoon If Time 11:00 to 13:00 Then SPulse If Time 14:00 to 15:00 Then Tidal If Time 15:00 to 18:00 Then Nutrient If Time 18:00 to 20:00 Then Tidal If Time 20:00 to 22:00 Then LPulse If Time 22:00 to 07:00 Then Nutrient Left MP40 Fallback Tidal Set AntiSync If Time 10:00 to 11:00 Then Sync If Time 11:00 to 12:00 Then Sync __________________ 234 Gallon Rimless DT 75 Gallon Custom Sump GHL Mitras ~ Radion PRO ~ SRO 3000 ~ GHL Doser ~ Vortech MP40s ~ Neptune Apex Last edited by Clownin Aroun; 03/31/2013 at 07:09 AM.

03/31/2013, 07:04 AM	#2
Dustin1300 Reefaholic Join Date: Sep 2007 Location: Carmel, IN Posts: 5,135	Both MP40s on my 140 gallon frag tank set up on same side wall and have following program: Fallback ON Set RfCrest If Time 00:00 to 06:00 Then Night If Time 06:00 to 06:30 Then Nutrient If Time 06:30 to 12:00 Then RfCrest If Time 12:00 to 12:30 Then Nutrient If Time 12:30 to 18:00 Then RfCrest If Time 18:00 to 18:30 Then Nutrient If Time 18:30 to 22:00 Then RfCrest If Time 22:00 to 22:30 Then Nutrient If Time 22:30 to 24:00 Then Night If FeedA 000 Then Feed __________________ INDMAS President Check out my tank in the Large Tank Forums, "A Reefaholic's 1000+ Gallon Mixed Reef System Build"! Current Tank Info: 600 Gallon DT, 140 Gallon Grow Out Tank, 125 Gallon Sump, 90 Gallon Fuge, 200 Gallon Fish QT, 15 Gallon Frag QT

05/20/2013, 01:08 PM	#3
takayan Premium Member Join Date: Aug 2004 Location: Superior, CO Posts: 748	These Profile entries such as Nigh, Nutrient, RfCrest and etc are preset setting? There is a table in Apex WXM manual like below. In this case, ReefCrst's max intensity 100%. Can I change it to 80% max? If it can be changed, how can it be changed? Profile Name Mode Notes ReefCrst Reef Crest Max Intensity 100% TidalSwl Tidal Swell Max Intensity 80% Nutrient Nutrient Export Max Intensity 90% Pulse Pulse Max Intensity 100%, on time to 0.55 seconds Night Constant Max Intensity 50% Sync Synchronize Max Intensity 100%, sync to VorTechLeft Anti-Sync Anti-sync Max Intensity 100%, anti-sync to VorTechLeft Slow Constant Max Intensity 25%