|
07/22/2018, 09:42 AM | #1 |
Reef Addict
Join Date: Feb 2014
Location: Naperville, IL.
Posts: 1,196
|
CaRx media lifespan and sensor cleaning
I have a PacSun CaRx which uses a sensor to detect the level of co2 in a chamber. That level is used by the controller to determine whether to trigger the solenoid and let in more co2.
As the media breaks down the water inside the reactor becomes cloudy. The level of cloudiness can depend on whether co2 is being reflowed from the media chamber or other activities disturbing the sediment. This cloudiness effects the sensor's reading of the co2 level. The media sediment can also collect on the sensor effecting the reading. The sensor can be cleaned but some water needs to be drained from the reactor. I haven't owned a CaRx that doesn't use a co2 sensor and suspect this isn't an issue for those. This issue is probably limited to the PacSun Calcfeeder and Dastaco. I'm wondering if people take their old media out, clean off the sediment and continue to use it? At what point does the media become unusable? I have a substantial amount of partially used media that has begun to break down, but is still solid. It's a shame this happens because once the media starts to break down it's in a good usable state providing consistent element levels to the tank, and the effluent pump is usually dialed in at this point.
__________________
- John New 260g build thread: http://www.reefcentral.com/forums/showthread.php?t=2557715 Current Tank Info: 260g reef, Giesemann Spectra MH/T5/Kessil A160, Dastaco CaRx, Vortechs, Lifereef skimmer, Red Dragon 3, Apex, Genesis, Angles, Tang, Trigger, Clowns, Anthias, Wrasses, Cardinals, SPS, LPS |
07/23/2018, 05:57 AM | #2 |
Grizzled & Cynical
Join Date: Apr 2006
Location: Stamford, CT
Posts: 17,319
|
Imagine you'd have to ask the manufacturer. Assume it's some kind of optical sensor. I use them in various applications and am generally not a fan. Too prone to false readings.
__________________
Simon Got back into the hobby ..... planned to keep it simple ..... yeah, right ..... clearly I need a new plan! Pet peeve: anemones host clowns; clowns do not host anemones! Current Tank Info: 450 Reef; 120 refugium; 60 Frag Tank, 30 Introduction tank; multiple QTs |
07/23/2018, 07:33 AM | #3 | |
Reef Addict
Join Date: Feb 2014
Location: Naperville, IL.
Posts: 1,196
|
Quote:
What I'm more interested in knowing is whether owners of calcium reactors clean their media from sediment and return it to the reactor.
__________________
- John New 260g build thread: http://www.reefcentral.com/forums/showthread.php?t=2557715 Current Tank Info: 260g reef, Giesemann Spectra MH/T5/Kessil A160, Dastaco CaRx, Vortechs, Lifereef skimmer, Red Dragon 3, Apex, Genesis, Angles, Tang, Trigger, Clowns, Anthias, Wrasses, Cardinals, SPS, LPS |
|
07/23/2018, 07:44 AM | #4 |
Grizzled & Cynical
Join Date: Apr 2006
Location: Stamford, CT
Posts: 17,319
|
I remove all the media when it is about half depleted, thoroughly rinse what remains, return it to the reactor and top up with new.
__________________
Simon Got back into the hobby ..... planned to keep it simple ..... yeah, right ..... clearly I need a new plan! Pet peeve: anemones host clowns; clowns do not host anemones! Current Tank Info: 450 Reef; 120 refugium; 60 Frag Tank, 30 Introduction tank; multiple QTs |
07/23/2018, 01:06 PM | #5 |
Registered Member
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
|
me too ---
__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps. |
07/23/2018, 02:50 PM | #6 |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
Hi John
We are using four core optical sensors specially made for our CalcFeeders and ATO units. They are very stable on readings and can't give you false readings. They putted in special chamber where there shouldn't be any particles/dirt which can make hem not working properly. In properly configured reactor your shouldn't have cloudy water inside reactor. If you have - mean that pH is too low for actually used media. What kind of media are you using? Optical sensor can be cleaned however even cloudy water shouldn't affect it in proper gas level reading. Regards Przemek
__________________
Home for Advanced Technology... www.Pacific-Sun.eu |
07/23/2018, 07:37 PM | #7 | |
Reef Addict
Join Date: Feb 2014
Location: Naperville, IL.
Posts: 1,196
|
Quote:
Even though the sensors are in the middle chamber, they are reading the co2 level so must detect how much co2 is in the mixing chamber. When the entire mixing chamber is cloudy from sediment, the sensors can have trouble detecting the level. The sediment can also restrict flow. The solution was simple enough, I just cleaned all the chambers. I wasn't sure whether the media could be reused after. It's good to hear that others regularly rinse their media from sediment. Now I know that I am not going to waste it. I should test the PH of my effluent. I haven't done that in a long time.
__________________
- John New 260g build thread: http://www.reefcentral.com/forums/showthread.php?t=2557715 Current Tank Info: 260g reef, Giesemann Spectra MH/T5/Kessil A160, Dastaco CaRx, Vortechs, Lifereef skimmer, Red Dragon 3, Apex, Genesis, Angles, Tang, Trigger, Clowns, Anthias, Wrasses, Cardinals, SPS, LPS |
|
Thread Tools | |
|
|