Mostly leaving the hobby so I felt it best to provide an opportunity for local people that might be interested in some of the equipment I have built up.
This is equipment only, no livestock is for sale (I gave most of it away).
Equipment ready for purchase now, all used as shown in attached pictures:
Rubbermaid 300G Stock Tank -
$350- Has 3 - 3" bulkheads located as shown in the attached pictures, bulkheads (not shown, removed for cleaning tank) WILL be included as part of the price.
- Approximate dimensions 63" x 69" x 25"
- If desired I will include the wood platform and foam panels I had placed under this as well as the plexi/wood lids I made to help cover it (at no extra cost)
- Please keep in mind the size when picking up or thinking about where you will place it.
Rubbermaid 100G Stock Tank -
$125- Has many drilled holes of a variety of sizes (the largest being a single 3"). This was the initial sump and as such had multiple holes for drains, passage to the 300G stock tank, water level sensors, etc... Bulkheads are included for ALL the larger (1"+ holes) only 1 of which is not shown in the attached pictures. There are 4 smaller holes used for sensors (circled in red) that are NOT guaranteed to have bulkheads. If I find some I will include them, but do not count on any. The true union valve attached to the drain will be included as well.
- Approximate dimensions 31" x 53" x 25"
- If desired I will include the 2x4/plywood platform and foam panel I had under this as the plexi/wood lids I made to help cover it (at no extra cost)
LED Lighting (Relassy Dimmable Reef Light) -
$50 each (3 available)[*]Include power cord and hangers, the oldest is from September 2020, with the newest from February 2021 and the middle from December 2020. All 3 are working fine and look basically identical. They were mounted in the display canopy.
Older Sequence Dart Pump (works fine) -
$100
Equipment that CAN be purchased but I am still cleaning the aquarium (someone is welcome to have it without me finishing of course):
180G Display Aquarium, Stand, and Canopy -
$1800- Aquarium is 22 3/4" deep x 24" tall x 78" wide
- Total height (stand/aquarium/canopy) is ~76"
- Stand/canopy add ~1 1/2" to width and 3/4" to depth (at the front)
- Drilled in the back panel for 2 - 2" drains and 4 - 1" returns, bulkheads included for all 6
- Initial drain/return PVC plumbing can be included if desired
- Stand and canopy are made by Joe (jmawoodworks) with cherry finish
- Stand is 33" tall and has a door on the left side, with the entire front panel able to be removed and an open back
- Canopy adds ~18" to overall height and has a door on the left side, the entire front hinges upwards. Has mounting bolts in the top to hang lighting from as well as panels for the back to keep things enclosed. Includes 2 - 200mm fans (12v, includes power supply) mounted in the back panels (all back panels are removable with wing nuts).
- I want to keep this set all together as the stand and canopy were specifically made for this tank
- Please keep in mind this is VERY large and VERY heavy. It will definitely require you to bring helpers in order to move (I recommend at least 3 people when moving the aquarium itself).
- There is one picture of the stand & aquarium as they are now while I am cleaning the aquarium and the stand front panel is off and one picture of the stand and canopy when I got them from Joe (no aquarium).
Cherry Stained Cabinet -
$300 ($200 if included with stand/aquarium/canopy)- This is a 3 section (2 enclosed with doors, 1 open) cabinet meant for standing alongside the left side of the stand/aquarium/canopy
- Has a panel on the right side to extend from the rest of the area so the left most return pipe is not interfered with
- Approximate dimensions are 13" deep x 76" tall x 25 1/2" wide
- This is actually ready to go but I hope someone will want it with the full setup - Cleaning supplies are not included
Bonuses when buying multiple things together:- Buying both stock tanks together I can include the plumbing I used for connecting the two (a section of 3" PVC with a 3" true union Hayward valve) at no extra cost (if desired)
- Buying both stock tanks AND the DART I can include the initial (to the DART) plumbing that connected to the tanks. This is 2 sections of 2" PVC pipe with multiple valves (it could be set to pull water from either stock tank) (if desired)
- Buying both stock tanks, the Dart, the aquarium/stand/canopy... I can also include all the drain/return plumbing (if desired) which consisted of 2" PVC drains, a 2" initial return that split off to 4 - 1" pipes (for each of the return fittings on the aquarium)
I have more things (heaters, UV sterilizer, skimmer, etc...) but I have not worried about getting those all set as they do not take up the space like these other items do. I will list them in the near future hopefully.
09/26/2021, 01:12 PM
