New Lumen Bright Reflector. ... any info on them - Page 22

raynist · 01/01/2008, 05:05 PM

Both are up

glxtrix · 01/02/2008, 05:29 PM

Quote:

Originally posted by ioreefer45
anyone have these reflectors over acrylic? How high do you have them? Just wondering how high I need to place these so that it does not produce excessive heat to cause stress or crazing on the top with the light be more concentrated and all. The reflectors are slightly larger than my openings (by 1-2").

your tank sounds like mine. I have acrylic and the bulbs are 12" from the surface.....I think. I'll have to look back and see for sure, but I'm almost 100% sure of that. I havnt noticed any issues as of yet and i've been running them for a few months now.

cl2ysta1 · 01/02/2008, 10:31 PM

we ordered two lumenbrights and should have them by the weekend. they are going to be fitted with two 400w 20k radiums on a 4ft by 3ft by 2ft tank. Should have them going by next week sometime i'll post pictures.

Rickyrooz1 · 01/02/2008, 10:35 PM

Quote:

Originally posted by cl2ysta1
we ordered two lumenbrights and should have them by the weekend. they are going to be fitted with two 400w 20k radiums on a 4ft by 3ft by 2ft tank. Should have them going by next week sometime i'll post pictures.

Nice tank dimensions, can't wait to see the tank with the new lights. Do you have any current pictures?

cl2ysta1 · 01/02/2008, 10:36 PM

sure do one sec lemmie get them we just set it up a few weeks ago

cl2ysta1 · 01/02/2008, 10:40 PM

here it is with the water in it for the first time

here is a picture with the rockwork just put in

picture with the bottom part of the stand finished

we are currently finishing up the canopy. planning on hanging the reflectors with the bulbs about 16 inches off the tank. there is only one 400w 20k radium running on the tank right now. getting some pretty good coverage with a run of the mill reflector. here are some more angles on the tank

grandp10 · 01/05/2008, 03:03 PM

I think I remember someone wanting to know when the finished black shell Lumenbrites were coming out. I was looking around reefspecialty.com and had noticed he is carrying the Lumenbrite reflectors with the finished outside. They look pretty nice. I believe they are available in double ended also. I got my reflectors from him and got great service.

JRaquatics · 01/05/2008, 06:10 PM

Here is the pic off Reef Specialty site.

Dack77 · 01/06/2008, 03:16 PM

Ok, stupid question for you guys. I just bought the lumen brights and the 12k reeflux bulbs. What are you guys meaning by nipple up on the halide bulbs? I just want to make sure I am getting the best par possible so I want to make sure I am putting them in the way you guys are describing.

JRaquatics · 01/06/2008, 03:21 PM

When you look at the inside of the bulb you will notice an area were the glass comes out of the interior portion, that should face up, the smooth portion should face down.

gary faulkner · 01/06/2008, 04:55 PM

I'm running Refflux 12K and they need replacing.

Where can I purchase the LuminBrites and Bulbs only?

I have the mogul sockets and ballasts already. Since I need new bulbs, I thought, why not go ahead and get the reflectors also.

TIA

JRaquatics · 01/06/2008, 05:01 PM

Quote:

Originally posted by gary faulkner
I'm running Refflux 12K and they need replacing.

Where can I purchase the LuminBrites and Bulbs only?

I have the mogul sockets and ballasts already. Since I need new bulbs, I thought, why not go ahead and get the reflectors also.

TIA

Reef Specialty, this is were my self and others have been getting them from.

Robert Patterso · 01/06/2008, 07:00 PM

Got mine from Reef Exotics. 109.95

JRaquatics · 01/06/2008, 07:04 PM

At this time Reef Specialty is selling them for $99 after the Grand opening Discount. Reef Specialty also doesn't charge a box fee.

Robert Patterso · 01/06/2008, 07:07 PM

Quote:

Originally posted by JRaquatics
At this time Reef Specialty is selling them for $99 with the Grand opening Discount. Reef Specialty also doesn't charge a box fee.

Guess I shoulda bought mine there

. Oh well to late now and I don't think I broke the bank

JRaquatics · 01/06/2008, 07:10 PM

Quote:

Originally posted by Robert Patterso
Guess I shoulda bought mine there . Oh well to late now and I don't think I broke the bank

How do you like them? Any pics?

Robert Patterso · 01/06/2008, 07:24 PM

Quote:

Originally posted by JRaquatics
How do you like them? Any pics?

Right now their still in the "box" I was charged for

. I'm in the process of collecting all my equipment for a new 140 I'm building. Once it's up and running I will definetly post pics. They will be in a 20" high canopy. The tank has a 120gal ft. print. 48x24x29tall.

JRaquatics · 01/06/2008, 09:55 PM

Quote:

Originally posted by Robert Patterso
Right now their still in the "box" I was charged for . I'm in the process of collecting all my equipment for a new 140 I'm building. Once it's up and running I will definetly post pics. They will be in a 20" high canopy. The tank has a 120gal ft. print. 48x24x29tall.

Sounds like a pretty awsome setup.

reefsafe · 01/06/2008, 10:42 PM

just set up 3 lumenbrites with reeflux 12k on my 135. will post pics soon. i also used t5 to supplement

burton14e7 · 01/07/2008, 12:28 PM

I just ordered two 400w LB pendant kits from reefspeciality

Can't wait to receive them.

Roland Jacques · 01/07/2008, 03:30 PM

Im trying to put this thread together in my head and i keep geting a liitle unsure. I need some help from you guys who seem to have a handle on this refector.

I'm planing a propagation system The Tank size will be 96" x 30" wide the depth will be 20" but have "tables" inside the tank to bring the corals to just below the surface. Efficiency is big for me. so i was plaining on using Three or Four 250 or 175 watt metal halides.

I'm up in the air about which reflectors to use. My goal is 300-400 PAR at 10" of depth. So I'm basically looking for a reflector that will give a wide pattern 24" or 30" square 10" below the water. The lights can be as high off the tank as needed, is this the right reflector for me?

burton14e7 · 01/07/2008, 03:35 PM

From earlier test a few pages back I believe they were getting about that much par on xm 20k's when the bulbs were 21" from the surface.

rickyb · 01/07/2008, 03:40 PM

Quote:

Originally posted by burton14e7
I just ordered two 400w LB pendant kits from reefspeciality Can't wait to receive them.

Me too! (X3)

Roland Jacques · 01/07/2008, 04:21 PM

Quote:

Originally posted by burton14e7
From earlier test a few pages back I believe they were getting about that much par on xm 20k's when the bulbs were 21" from the surface.

So they got 300-400 PAR at 10" depth over a a 24"-30" spread. What wattage?

I'm just having a time with trying to put this info together in my head. So do you think this is a good choice of reflector for my desired wide shallow pattern? Thanks

burton14e7 · 01/07/2008, 04:44 PM

Yeah that's what it seems. Using 400w XM 20k's. Not so sure on the spread, check out page 18.

01/02/2008, 10:31 PM	#528
cl2ysta1 Registered Member Join Date: Jan 2007 Location: Marion, Ohio Posts: 1,227	we ordered two lumenbrights and should have them by the weekend. they are going to be fitted with two 400w 20k radiums on a 4ft by 3ft by 2ft tank. Should have them going by next week sometime i'll post pictures. __________________ 900 Gallon Starphire in the works Current Tank Info: 120 gallon

01/02/2008, 10:36 PM	#530
cl2ysta1 Registered Member Join Date: Jan 2007 Location: Marion, Ohio Posts: 1,227	sure do one sec lemmie get them we just set it up a few weeks ago __________________ 900 Gallon Starphire in the works Current Tank Info: 120 gallon

01/02/2008, 10:40 PM	#531
cl2ysta1 Registered Member Join Date: Jan 2007 Location: Marion, Ohio Posts: 1,227	here it is with the water in it for the first time here is a picture with the rockwork just put in picture with the bottom part of the stand finished we are currently finishing up the canopy. planning on hanging the reflectors with the bulbs about 16 inches off the tank. there is only one 400w 20k radium running on the tank right now. getting some pretty good coverage with a run of the mill reflector. here are some more angles on the tank __________________ 900 Gallon Starphire in the works Current Tank Info: 120 gallon

01/05/2008, 03:03 PM	#532
grandp10 Registered Member Join Date: Sep 2006 Posts: 516	finished Lumenbrite I think I remember someone wanting to know when the finished black shell Lumenbrites were coming out. I was looking around reefspecialty.com and had noticed he is carrying the Lumenbrite reflectors with the finished outside. They look pretty nice. I believe they are available in double ended also. I got my reflectors from him and got great service.

01/06/2008, 03:16 PM	#534
Dack77 Registered Member Join Date: Apr 2007 Posts: 103	Ok, stupid question for you guys. I just bought the lumen brights and the 12k reeflux bulbs. What are you guys meaning by nipple up on the halide bulbs? I just want to make sure I am getting the best par possible so I want to make sure I am putting them in the way you guys are describing. __________________ Mike B. Current Tank Info: Red Sea Reefer 170, Neptune Apex, Radion XR15 G4 Pro

01/01/2008, 05:05 PM	#526
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Both are up

01/05/2008, 06:10 PM	#533
JRaquatics Awaiting Email Confirmation Join Date: Sep 2005 Location: On RC Posts: 3,609	Here is the pic off Reef Specialty site.

01/06/2008, 03:21 PM	#535
JRaquatics Awaiting Email Confirmation Join Date: Sep 2005 Location: On RC Posts: 3,609	When you look at the inside of the bulb you will notice an area were the glass comes out of the interior portion, that should face up, the smooth portion should face down.

01/06/2008, 04:55 PM	#536
gary faulkner Registered Member Join Date: Apr 2005 Location: North Carolina Posts: 1,468	I'm running Refflux 12K and they need replacing. Where can I purchase the LuminBrites and Bulbs only? I have the mogul sockets and ballasts already. Since I need new bulbs, I thought, why not go ahead and get the reflectors also. TIA __________________ Gary Current Tank Info: 300G SPS

01/06/2008, 07:00 PM	#538
Robert Patterso Registered Member Join Date: Aug 2006 Location: Denton, Tx Posts: 711	Got mine from Reef Exotics. 109.95 __________________ Way to many projects, not enough money and even less time Current Tank Info: 140 ssb, 75g sump ect. xp2000 cone skimmer, 400w XM 20k's in sm. Lumenbrites, ATS over refugium

01/06/2008, 07:04 PM	#539
JRaquatics Awaiting Email Confirmation Join Date: Sep 2005 Location: On RC Posts: 3,609	At this time Reef Specialty is selling them for $99 after the Grand opening Discount. Reef Specialty also doesn't charge a box fee.

01/06/2008, 10:42 PM	#544
reefsafe Premium Member Join Date: Jul 2005 Location: Arvada, CO Posts: 2,332	just set up 3 lumenbrites with reeflux 12k on my 135. will post pics soon. i also used t5 to supplement __________________ Is there such thing as a big enough tank? Tank build: http://www.reefcentral.com/forums/showthread.php?t=1969509 Current Tank Info: 360 Gallon AGE tank, Radion lighting, mp60 pumps and lots of equipment

01/07/2008, 12:28 PM	#545
burton14e7 Registered Member Join Date: Feb 2004 Location: Keller, Tx Posts: 2,009	I just ordered two 400w LB pendant kits from reefspeciality Can't wait to receive them. __________________ Go Lakers! Current Tank Info: Currently awaiting relapse.

01/07/2008, 03:30 PM	#546
Roland Jacques Premium Member Join Date: Mar 2003 Location: Atlanta GA Posts: 2,848	Im trying to put this thread together in my head and i keep geting a liitle unsure. I need some help from you guys who seem to have a handle on this refector. I'm planing a propagation system The Tank size will be 96" x 30" wide the depth will be 20" but have "tables" inside the tank to bring the corals to just below the surface. Efficiency is big for me. so i was plaining on using Three or Four 250 or 175 watt metal halides. I'm up in the air about which reflectors to use. My goal is 300-400 PAR at 10" of depth. So I'm basically looking for a reflector that will give a wide pattern 24" or 30" square 10" below the water. The lights can be as high off the tank as needed, is this the right reflector for me? __________________ Roland

01/07/2008, 03:35 PM	#547
burton14e7 Registered Member Join Date: Feb 2004 Location: Keller, Tx Posts: 2,009	From earlier test a few pages back I believe they were getting about that much par on xm 20k's when the bulbs were 21" from the surface. __________________ Go Lakers! Current Tank Info: Currently awaiting relapse.

01/07/2008, 04:44 PM	#550
burton14e7 Registered Member Join Date: Feb 2004 Location: Keller, Tx Posts: 2,009	Yeah that's what it seems. Using 400w XM 20k's. Not so sure on the spread, check out page 18.