Kessil Club - Page 30

dougchambers · 06/14/2015, 01:13 PM

Quote:

Originally Posted by m0nkie

Hi guys. For all the Kessil 360 owners with controller, can you tell me what settings you guys leave your light color on??? what %??

Right now, I have my Kessils ramp dusk/dawn effect. During peak day, I set the color to be 70%. It's pretty white. Wondering if this is too much white? should I lower it to around 50% to more blue?

what does everyone else keep it at?

thanks!

Here is a recommended profile Kessil gave us. I get some flicker down at 15-16 on intensity so I start at 17;

Color
12:00 0%
14:00 20%
16:00 30%
18:00 75%
20:00 25%
22:00 0%

Intensity
12:00 17%
14:00 30%
16:00 50%
18:00 50%
20:00 40%
22:00 17%

Working well so far...

m0nkie · 06/14/2015, 01:51 PM

Quote:

Originally Posted by Newbie Aquarist

Color doesn't matter. It depends on what color you like your tank to look. It's the intensity that makes you or breaks you. My intensity doesn't go higher than 45-50%.

Thanks! I did not know that. I thought corals prefer more blue.. (my T5 tank is mostly Blue+)

Quote:

Originally Posted by dougchambers

Here is a recommended profile Kessil gave us. I get some flicker down at 15-16 on intensity so I start at 17;

Color
12:00 0%
14:00 20%
16:00 30%
18:00 75%
20:00 25%
22:00 0%

Intensity
12:00 17%
14:00 30%
16:00 50%
18:00 50%
20:00 40%
22:00 17%

Working well so far...

great! Thanks. I will lower my intensity a bit..

Newbie Aquarist · 06/14/2015, 01:55 PM

Quote:

Originally Posted by m0nkie

Thanks! I did not know that. I thought corals prefer more blue.. (my T5 tank is mostly Blue+)

That is trues. It stimulates the zooanthalle.

WangoTANGo · 06/14/2015, 04:24 PM

Looking to join the club too:

Planning on a new nano, either a 24x24x12 rimless by Deep Blue or a 30x18x18 by CAD Lights. I figured the A360w would be more than enough for the 24x24, but I'm concerned about dark spots on the CAD Lights tank. The lighting budget is what's going to ultimately decide between the two tank sizes, and would prefer not to have to run two lights on the CAD tank.

Thoughts?

grego84 · 06/14/2015, 05:12 PM

Quote:

Originally Posted by WangoTANGo

Looking to join the club too:

Planning on a new nano, either a 24x24x12 rimless by Deep Blue or a 30x18x18 by CAD Lights. I figured the A360w would be more than enough for the 24x24, but I'm concerned about dark spots on the CAD Lights tank. The lighting budget is what's going to ultimately decide between the two tank sizes, and would prefer not to have to run two lights on the CAD tank.

Thoughts?

If the lighting price is an issue why not do 2 X 160we lights. Doubt you will need the power of the 360 with the depths you are planning. Two lights will cut down on shadows.

Reefer54 · 06/14/2015, 09:36 PM

Quote:

Originally Posted by Newbie Aquarist

That is trues. It stimulates the zooanthalle.

This brings up a question i have been trying to find an answer to. I would like to see a spectral chart that shows what spectrum\color % these are kicking out from full actinic to full white (the spectrum must change a bit from blue to white) has anyone seen a reported claim or graph of where the spectrum is according to the position of the knobs or according to the controller, at 5%, 10%, 30% etc.... (any\all models would be helpful, but i ask mostly for the 360we)

i would like to tailor my lights to a spectrum and not just by my eye.

*i have spent a good deal of time on the site.

grego84 · 06/15/2015, 12:03 AM

Quote:

Originally Posted by Reefer54

This brings up a question i have been trying to find an answer to. I would like to see a spectral chart that shows what spectrum\color % these are kicking out from full actinic to full white (the spectrum must change a bit from blue to white) has anyone seen a reported claim or graph of where the spectrum is according to the position of the knobs or according to the controller, at 5%, 10%, 30% etc.... (any\all models would be helpful, but i ask mostly for the 360we)

i would like to tailor my lights to a spectrum and not just by my eye.

*i have spent a good deal of time on the site.

That is from the kessil site on the A160 page.

That is fron the kessil site on the A360 page.

jestronix · 06/15/2015, 03:50 AM

I think led light manufactures should have to produce a full light spectrum photo showing missing bands of the spectrum, smooth graphing above doesn't show this.

grego84 · 06/15/2015, 09:41 AM

There is also a test that one of the RC users did outlined here.

http://www.reefcentral.com/forums/sh...php?p=23071080

mmn · 06/15/2015, 05:58 PM

Quote:

Originally Posted by dougchambers

Here is a recommended profile Kessil gave us. I get some flicker down at 15-16 on intensity so I start at 17;

Color
12:00 0%
14:00 20%
16:00 30%
18:00 75%
20:00 25%
22:00 0%

Intensity
12:00 17%
14:00 30%
16:00 50%
18:00 50%
20:00 40%
22:00 17%

Working well so far...

With that profile if you're using the VARSPD outlet on the APEX, they never turn off. You have to make the intensity go to 0. Do they turn off using the Kessil controller?

Reefer54 · 06/16/2015, 01:33 AM

Quote:

Originally Posted by mmn

With that profile if you're using the VARSPD outlet on the APEX, they never turn off. You have to make the intensity go to 0. Do they turn off using the Kessil controller?

yes. the kessil controller turns them off.

Reefer54 · 06/16/2015, 01:41 AM

; [i

Reefer54 · 06/16/2015, 01:43 AM

Quote:

Originally Posted by grego84

That is from the kessil site on the A160 page.

That is fron the kessil site on the A360 page.

the spectral records shown have 3 different output shifts in them....at what settings would the knobs be to create any of the outputs shown for any determined amount of time....or a different spectral output for that matter; that's what i was asking in the above post.

do you see what i am saying.

Reefer54 · 06/16/2015, 01:45 AM

Quote:

Originally Posted by grego84

There is also a test that one of the RC users did outlined here.

http://www.reefcentral.com/forums/sh...php?p=23071080

Yes.....information like this, but as is mentioned in the thread, information that is not with the light at 100% full bore.

thanks for the point in the right direction

dougchambers · 06/16/2015, 07:29 AM

Quote:

Originally Posted by mmn

With that profile if you're using the VARSPD outlet on the APEX, they never turn off. You have to make the intensity go to 0. Do they turn off using the Kessil controller?

Correct. I have a separate timer that provides power to the Kessil's independent of their VARSPD on the Apex.

mistaflicksta · 06/16/2015, 02:15 PM

Two A160WS over my 150H (48L X 24W X 30H) want to see what these lights can do

mmittlesteadt · 06/16/2015, 02:28 PM

This is my 40 breeder (36 wide X 18 deep X 17 high) lit by a single A160WE about 8" off the water. I personally want shadows and some tapering off towards the sides to reduce the boxy look of the tank. But that's me...I'm more interested in the overall look of the aquarium as a whole, than just lighting corals. This pic shows it at about 60% intensity and about 50% spectrum shift. I've since added a zoa way down on the far left, lowest rock and it's doing great.

Zoa (as I bought it and placed in the tank)...

GSP (a little higher and to the right of the zoa)...

And a Goniopora sitting to the right of the GSP in the middle of the tank, again, a little higher (about mid water level...and doing even better now than when this pic was taken)...

Wally.B · 06/17/2015, 12:26 AM

Subscribing to not lose track of this great thread.

Just finished setting up a single 360AWE Kessil over my 90gal tank.

I'll be posting a thread with the setup, since there are many details.

It's a long story, but to summarise, I got a single Kessil to try.
It was a toss up between a Kessil or a Radion.

Love/Hated it. At first really regretting going with Kessil over the Radion. Almost decided to sell it.

Then with a few compliments and adjustments it turned out to be the PERFECT replacement for my 150Wx2 MH fixture.

Couldn't be more happier with the decision.

that Fish Guy · 06/17/2015, 01:12 AM

Quote:

Originally Posted by m0nkie

Thanks! I did not know that. I thought corals prefer more blue.. (my T5 tank is mostly Blue+)

great! Thanks. I will lower my intensity a bit..

Corals utilize the Blue Spectrum more than the others.

I only use Blue Lights.

I have 3 LED Tanks that use Kessils (Only Blue No White).

I have 2 T5 Tanks that are each 4 ATI Blue Plus Bulbs with no White Bulbs.

White Looks Ugly Anyways.

that Fish Guy · 06/17/2015, 01:16 AM

Quote:

Originally Posted by M.R Cowfish

just got a a360we hung it up next to my 350n half my tank is deep purple/blue and the other half is a duller blue . Turned my 350 off as I thought it was just differences between the 2 models . It continued after I unplugged the 350 anybody ever had this issue ?

The A350's Are Much Bluer than the A360's

The Original A360's were more Purple in Color.

The Original A360 W-E was more White in Color.

Over time they have changed the lights though.

The A160 is much much more Blue than the A360's but maybe they changed the Lights again.

I have not seen any New A360's.

that Fish Guy · 06/17/2015, 01:17 AM

Quote:

Originally Posted by m0nkie

Hi guys. For all the Kessil 360 owners with controller, can you tell me what settings you guys leave your light color on??? what %??

Right now, I have my Kessils ramp dusk/dawn effect. During peak day, I set the color to be 70%. It's pretty white. Wondering if this is too much white? should I lower it to around 50% to more blue?

what does everyone else keep it at?

thanks!

100 Percent Blue
0 Percent White

lrasser · 06/17/2015, 05:22 AM

I was offered a 150w Deep ocean Blue and was looking for opinions. I've never used a Kessil since i've always been a T5 SPS guy. I'm curious if this would be good as the only light over a 15g sps frag tank. I know its 20k so not really worried about the colot but more if it will be enough for good growth. I can't find much data or reviews on this model and that worries me.

boogie01 · 06/17/2015, 07:48 AM

I'm with irasser, I have a sfiligoi t5/led combo. I'd love to have all led and I'm sure someone has posted something but I'm new to the forum and the thread is 30 pages can anyone with an sps dominant tank show pics with these after they have been on the tank 6 months or longer?

kevin32 · 06/17/2015, 07:08 PM

Quote:

Originally Posted by Underwoo

Here are the part numbers.
From Superbrightleds.com
LEDS:SWFLS-B30-BK
Connector: NFLS10-2CHCPS
Power Supply:CPS-12VDC-6W

From Hobby Lobby.
Wooden hoop: sku# 642207

Note: you may find some of these items cheaper on Amazon.

Thanks a lot.

Granny2 · 06/17/2015, 07:39 PM

I am just putting together a new display tank in the main area of our home. I am going with 30" deep tank. Does anyone have any advise on 360N or would the 360WE get the penitration I will require ? Any advise would be greatly appreciated. Thanks

06/14/2015, 04:24 PM	#729
WangoTANGo Registered Member Join Date: Aug 2006 Location: Providence, RI Posts: 177	Looking to join the club too: Planning on a new nano, either a 24x24x12 rimless by Deep Blue or a 30x18x18 by CAD Lights. I figured the A360w would be more than enough for the 24x24, but I'm concerned about dark spots on the CAD Lights tank. The lighting budget is what's going to ultimately decide between the two tank sizes, and would prefer not to have to run two lights on the CAD tank. Thoughts? __________________ In the seemingly never-ending struggle of balancing an expensive hobby with having to pay back for an expensive education... Current Tank Info: 40 breeder in the works

06/16/2015, 01:41 AM	#737
Reefer54 Registered Member Join Date: Sep 2007 Location: Avon Posts: 1,087	; [i __________________ R54 Current Tank Info: 36 x 36 x 25 Cube, mixed reef, A360WE x 3, A350N x 1, 40GB sump, RDSB, Remote LR Cryptic, 2 WP-40's, ummm....

06/16/2015, 02:28 PM	#742
mmittlesteadt Registered Member Join Date: Feb 2015 Location: Rothschild, WI Posts: 1,209	This is my 40 breeder (36 wide X 18 deep X 17 high) lit by a single A160WE about 8" off the water. I personally want shadows and some tapering off towards the sides to reduce the boxy look of the tank. But that's me...I'm more interested in the overall look of the aquarium as a whole, than just lighting corals. This pic shows it at about 60% intensity and about 50% spectrum shift. I've since added a zoa way down on the far left, lowest rock and it's doing great. Zoa (as I bought it and placed in the tank)... GSP (a little higher and to the right of the zoa)... And a Goniopora sitting to the right of the GSP in the middle of the tank, again, a little higher (about mid water level...and doing even better now than when this pic was taken)... __________________ Every life on this planet deserve respect, no matter how small or insignificant it may appear at first glance. 40 Gallon Build Thread - http://www.reefcentral.com/forums/showthread.php?t=2486801 Current Tank Info: 40 Gallon Breeder, Eshopps PSK-100, Kessil A160WE, 70 lbs. rock, 65 gallon sump, 27 gallon refugium Last edited by mmittlesteadt; 06/16/2015 at 02:34 PM.

06/17/2015, 07:39 PM	#750
Granny2 Registered Member Join Date: Jun 2015 Posts: 4	Kessil 360WE. Or 360N I am just putting together a new display tank in the main area of our home. I am going with 30" deep tank. Does anyone have any advise on 360N or would the 360WE get the penitration I will require ? Any advise would be greatly appreciated. Thanks

06/15/2015, 03:50 AM	#733
jestronix Registered Member Join Date: Apr 2009 Posts: 451	I think led light manufactures should have to produce a full light spectrum photo showing missing bands of the spectrum, smooth graphing above doesn't show this.

06/15/2015, 09:41 AM	#734
grego84 Registered Member Join Date: Jun 2014 Posts: 38	There is also a test that one of the RC users did outlined here. http://www.reefcentral.com/forums/sh...php?p=23071080

06/17/2015, 12:26 AM	#743
Wally.B Registered Member Join Date: Oct 2014 Location: Toronto GTA,Canada Posts: 1,763	Subscribing to not lose track of this great thread. Just finished setting up a single 360AWE Kessil over my 90gal tank. I'll be posting a thread with the setup, since there are many details. It's a long story, but to summarise, I got a single Kessil to try. It was a toss up between a Kessil or a Radion. Love/Hated it. At first really regretting going with Kessil over the Radion. Almost decided to sell it. Then with a few compliments and adjustments it turned out to be the PERFECT replacement for my 150Wx2 MH fixture. Couldn't be more happier with the decision.

06/17/2015, 05:22 AM	#747
lrasser Registered Member Join Date: Mar 2014 Posts: 207	I was offered a 150w Deep ocean Blue and was looking for opinions. I've never used a Kessil since i've always been a T5 SPS guy. I'm curious if this would be good as the only light over a 15g sps frag tank. I know its 20k so not really worried about the colot but more if it will be enough for good growth. I can't find much data or reviews on this model and that worries me.

06/17/2015, 07:48 AM	#748
boogie01 Registered Member Join Date: Jun 2015 Posts: 60	I'm with irasser, I have a sfiligoi t5/led combo. I'd love to have all led and I'm sure someone has posted something but I'm new to the forum and the thread is 30 pages can anyone with an sps dominant tank show pics with these after they have been on the tank 6 months or longer?