anyone tried to using Jebo WP40? - Page 39

bhazard451 · 03/12/2013, 01:08 PM

Quote:

Originally Posted by amutti

Did we decide this one WILL work with the POT? I just got the PWM yesterday and shelved it as I thought it wouldn't work based on my following of the thread. . . And I'm pretty happy at full 24v. . . If it does I'll add it just in case.

I'm going to try it again later.

SimonSKL · 03/12/2013, 01:26 PM

Quote:

Originally Posted by SteelMastiff

I see on their website that all "pre-order" customers will receive an additional light sensor for free. Perhaps they are aware of a potential issue with the sensors themselves, or perhaps not and it is indeed just an added bonus for pre-order customers.

LOL! If one is useless having another one doesn't do much good. It costs them pennies to include an extra sensor. What we need is a better sensor.

SteelMastiff · 03/12/2013, 01:41 PM

Quote:

Originally Posted by NyteGTI

Ordered mine last wednesday(3/6) got an email from eric this morning saying itll be shipping in 2-3 days. This is for all of you that have been asking about how long for preorder shipments.

Good to know, here's to hoping my order goes out in a similar fashion.

barry_keith · 03/12/2013, 01:41 PM

Quote:

Originally Posted by SimonSKL

LOL! If one is useless having another one doesn't do much good. It costs them pennies to include an extra sensor. What we need is a better sensor.

exactly!

SteelMastiff · 03/12/2013, 01:44 PM

Quote:

Originally Posted by SimonSKL

LOL! If one is useless having another one doesn't do much good. It costs them pennies to include an extra sensor. What we need is a better sensor.

Logically one would assume this now wouldn't they...

SPotter · 03/12/2013, 01:45 PM

just ordered mine....hopefully it will hold on 3/4" glass.

nightOwl · 03/12/2013, 02:14 PM

Quote:

Originally Posted by SPotter

just ordered mine....hopefully it will hold on 3/4" glass.

Steve - I see you are on the bandwagon

. They had some info on glass thickness towards the beginning of the thread. The supplied magnet is not as thick as Tunze magnets.

Originally Posted by SimonSKL View Post
Just keep in mind about the thickness of your glass as WP40 is designed for glass thickness no more than 0.6".

SPotter · 03/12/2013, 02:16 PM

Quote:

Originally Posted by nightOwl

Steve - I see you are on the bandwagon

. They had some info on glass thickness towards the beginning of the thread. The supplied magnet is not as thick as Tunze magnets.

Originally Posted by SimonSKL View Post
Just keep in mind about the thickness of your glass as WP40 is designed for glass thickness no more than 0.6".

Thanks Henry. I have some extra magnets laying around from an old 6305 I had that died on me. I'll see if that works. If not it will be perfect in my frag tank.

Sent from my iPhone using Tapatalk 2

DavidinGA · 03/12/2013, 02:34 PM

Quote:

Originally Posted by SPotter

just ordered mine....hopefully it will hold on 3/4" glass.

If not it does have a suction on the wet side too. I pulled my outside magnet off and the pump stayed put without it.

Sent by Samsung Galaxy Note 2 and Tapatalk 2

SPotter · 03/12/2013, 02:36 PM

Quote:

Originally Posted by DavidinGA

If not it does have a suction on the wet side too. I pulled my outside magnet off and the pump stayed put without it.

Sent by Samsung Galaxy Note 2 and Tapatalk 2

Great! I'm anxious to see how this will work on my 72"x36" tank.

Sent from my iPhone using Tapatalk 2

slajiness · 03/12/2013, 02:37 PM

Quote:

Originally Posted by SPotter

just ordered mine....hopefully it will hold on 3/4" glass.

Mine holds fine.

Aperture.pcs · 03/12/2013, 02:41 PM

Group buy for this anyone?

nightOwl · 03/12/2013, 02:48 PM

For those that have the pump if you were to divide the side of your tank into a tic -tac- toe board which quadrant are you placing the pump in? I plan on playing around with it this weekend.

ctlegacy · 03/12/2013, 02:56 PM

Quote:

Originally Posted by Aperture.pcs

Group buy for this anyone?

I tried to get 50 of them, but there's no deal on shipping.

bhazard451 · 03/12/2013, 02:58 PM

Quote:

Originally Posted by ctlegacy

I tried to get 50 of them, but there's no deal on shipping.

You would have to go through jebao themselves.

geaux xman · 03/12/2013, 03:00 PM

i'm going to tell mr chingchai to get some of these wp40 for his big tank.

SPotter · 03/12/2013, 03:06 PM

Quote:

Originally Posted by nightOwl

For those that have the pump if you were to divide the side of your tank into a tic -tac- toe board which quadrant are you placing the pump in? I plan on playing around with it this weekend.

I will need you to decipher this for me once you have it figured out.

Sent from my iPhone using Tapatalk 2

barry_keith · 03/12/2013, 03:07 PM

Quote:

Originally Posted by nightOwl

For those that have the pump if you were to divide the side of your tank into a tic -tac- toe board which quadrant are you placing the pump in? I plan on playing around with it this weekend.

Mines in the center, and pointed slightly upward.

nightOwl · 03/12/2013, 03:16 PM

Quote:

Originally Posted by SPotter

I will need you to decipher this for me once you have it figured out.

Sent from my iPhone using Tapatalk 2

Steve - I probably should have said 3x3 grid lol.

SPotter · 03/12/2013, 03:29 PM

Quote:

Originally Posted by nightOwl

Steve - I probably should have said 3x3 grid lol.

I meant the apex hook up.

Sent from my iPhone using Tapatalk 2

coryjones · 03/12/2013, 03:33 PM

here is a video of my wp-40 on my 60 cube on a 15v powersupply

http://s289.photobucket.com/albums/l...ps340e86a7.mp4

SimonSKL · 03/12/2013, 03:37 PM

Quote:

Originally Posted by coryjones

here is a video of my wp-40 on my 60 cube on a 15v powersupply

http://s289.photobucket.com/albums/l...ps340e86a7.mp4

You don't have much room to play with the wave mode!

chercm · 03/12/2013, 03:43 PM

Quote:

Originally Posted by coryjones

here is a video of my wp-40 on my 60 cube on a 15v powersupply

http://s289.photobucket.com/albums/l...ps340e86a7.mp4

nice !!!

Frode · 03/12/2013, 03:47 PM

Quote:

Originally Posted by dartier

Here is a photo of the test harness that Roberto from Reefangel constructed. Hopefully he does not mind me posting it here. As they say, a picture is worth a thousand explanations

In the above photo:

the blue wire appears to be ground
the yellow wire is the +5V analog control signal (labelled VA on the controller's board)
the brown wire is the +24V DC

The white wire is the connector for the 0-10V analog connected between ground and +5V analog input to the pump. Remember you have to keep the signal from your device toa maximum of 5 volts.

Dennis

That's great Dennis, big thanks for posting here.

nightOwl · 03/12/2013, 04:17 PM

Quote:

Originally Posted by SPotter

I meant the apex hook up.

Sent from my iPhone using Tapatalk 2

Sounds good

03/12/2013, 01:45 PM	#956
SPotter Registered Member Join Date: Jun 2010 Location: Mt. Pleasant, SC Posts: 5,691	just ordered mine....hopefully it will hold on 3/4" glass. __________________ Steve Am I really doing all of this for a fish tank?????? Current Tank Info: 360g Envision Acrylic Tank, Closed Loops, Vectra L1's, MP40QD's, 400w Radiums, Regal 300ext, Dastaco Ext3 CaRx, Controlled by GHL Profilux

03/12/2013, 02:48 PM	#963
nightOwl Premium Member Join Date: Mar 2004 Location: Maryland Posts: 1,799	For those that have the pump if you were to divide the side of your tank into a tic -tac- toe board which quadrant are you placing the pump in? I plan on playing around with it this weekend. __________________ To check out my pictures of my tank and trips just click on my name and visit my homepage. Tank Build Thread (Miracles Custom) - http://www.reefcentral.com/forums/showthread.php?t=2628737

03/12/2013, 03:00 PM	#966
geaux xman Registered Member Join Date: Feb 2010 Location: Baton Rouge, LA Posts: 3,279	i'm going to tell mr chingchai to get some of these wp40 for his big tank. __________________ - Miracles 180g 60x30x23" rimless FOWLR - Youtube video: Miracles 180g March 2013

03/12/2013, 02:41 PM	#962
Aperture.pcs Moved On Join Date: Feb 2013 Location: Windham, CT Posts: 506	Group buy for this anyone?

03/12/2013, 03:33 PM	#971
coryjones Premium Member Join Date: Jul 2007 Location: Decatur Posts: 489	here is a video of my wp-40 on my 60 cube on a 15v powersupply http://s289.photobucket.com/albums/l...ps340e86a7.mp4