|
11/09/2014, 09:48 PM | #76 |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
Yes, the standard sizes also fit. Don't complain about the metric bulkheads, just replace them and you are good to go. I am happy with my purchase. I might be happier with a c-max 250 with an LED, but that is a year away and would cost me at least another $1500 on top of what I paid. I am happy with purchase.
|
11/10/2014, 08:58 AM | #77 |
Registered Member
Join Date: Oct 2005
Location: Colorado
Posts: 1,955
|
Underwoo, did you attempt to replace your bulkheads with standard sized ones?
__________________
cheers, jent d-_-b Current Tank Info: 66gal = 32x24x20 |
11/11/2014, 01:03 PM | #78 |
Registered Member
Join Date: Sep 2014
Posts: 54
|
Can't speak for others but my bulkheads didn't fit. I couldn't screw them in the holes.
|
11/11/2014, 05:36 PM | #79 | |
Registered Member
Join Date: Oct 2005
Location: Colorado
Posts: 1,955
|
Quote:
http://www.bulkreefsupply.com/bulkhe...d84463d93.html I found out that some of the cadlights aquarium owners were using those bulkheads. I believe these aquariums are made by the same chinese manufacture as cadlights (they certainly seem to have the same issues and similar design aspects).
__________________
cheers, jent d-_-b Current Tank Info: 66gal = 32x24x20 |
|
11/11/2014, 05:53 PM | #80 |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
ITEM DETAILS FOR THIS ORDER:
18985**1" SLIP BULKHEAD KIT 18983**1/2" SLIP BULKHEAD KIT These are the items I ordered from Drs fosterandsmith. They fit perfectly. |
11/11/2014, 06:19 PM | #81 |
Registered Member
Join Date: Sep 2014
Posts: 54
|
Thanks so much for the info. The bulkheads I got was from Homedepot. I would definitely try again when I am ready to drain the overflow. i am gonna get them and wait for a rainy day when I have help!
|
11/11/2014, 08:15 PM | #82 |
Registered Member
Join Date: Jun 2011
Location: Minnesota
Posts: 191
|
Yes for any of you replacing the bulkheads if you go to the local hardware store most only carry one made for sch 80 and they are larger. i used the ones from eshopps for the sch 40 tubing and they fit right in!
|
11/11/2014, 09:48 PM | #83 |
Registered Member
Join Date: Sep 2013
Location: Boca Raton, FL
Posts: 58
|
I replace the bulkheads that came with the systems, because they felt cheap.I got the a couple these from AquaCave. 0.5" BULKHEADS, SCH. 40 & 1" BULKHEADS, SCH. 40. Just finish putting in some LED lights for the sump area.
|
11/11/2014, 10:37 PM | #84 |
Registered Member
Join Date: Sep 2013
Location: Boca Raton, FL
Posts: 58
|
Hey booyaa138, I really like the dim's on the 80 gallon. (32"x24"x24")I always wanted a cube tank, so i went with this tank.(almost a cube!) Anyway, it's been slow going, and still have plenty to do in the sump area yet. Couple things i did in the cabinet sump area. I add the white plastic contact paper to give me more reflextion with the lighting, when have to do maintenance in the sump area. I also have my sump sitting on some R Max form, rap with a Anti-Vibration Pad, and the sump itself is on a Dog Crate, to keep some of the water from getting onto the bottom of the cabinet. Will keep posting photos of my progress.
|
11/12/2014, 10:25 AM | #85 | |
Registered Member
Join Date: Dec 2013
Posts: 500
|
Quote:
I'm wondering if a large marine pure block would fit well? Thanks! |
|
11/13/2014, 08:03 PM | #86 | |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
Quote:
Thanks Onur |
|
11/14/2014, 02:43 PM | #87 |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
Sump Question
I bought a 200W heater to heat the aquarium. 50W ones were not able to bring it up to my other aquarium's temperature. It is currently in the DT. The sump is not operational yet. I have two Koralias and air in the DT. 200W heater is about 13" tall. The mid section baffles are 7". So my constant water level will be 7". I think I need to return this heater if I don't want to keep it in DT. Anyone have water in their sumps yet? Can you post a picture of the constant water level? |
11/14/2014, 03:27 PM | #88 |
Registered Member
Join Date: Sep 2014
Posts: 54
|
The sump water level is corespondent to the baffle next to it. The water enters the first chamber (highest) is around 9.5" on mine, it goes about half an inch lower with each chamber and eventually at the lowest where the return pump is.
Ps. I have 2x300w heaters in my sump. One set to 80f and another at 78f. The 2nd one doesn't kick in unless the temp drops too low. |
11/14/2014, 04:11 PM | #89 |
Registered Member
Join Date: Oct 2005
Location: Colorado
Posts: 1,955
|
OceanWolf, I assume the heater is submersible? Why not just lay it on it's side against the bottom of the sump?
__________________
cheers, jent d-_-b Current Tank Info: 66gal = 32x24x20 |
11/14/2014, 04:32 PM | #90 | |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
Quote:
You beat me to it. Yes, it will go to the mid section horizontally. It will be below the top of baffle which will make it always submersed. |
|
11/14/2014, 04:34 PM | #91 | |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
Quote:
|
|
11/14/2014, 04:45 PM | #92 |
Registered Member
Join Date: Dec 2013
Posts: 500
|
How larger is your skimmer compartment, wondering what fits, unless the supplied skimmer is working really well, and quiet I may look to upgrade in that area. Most reviews on the SCA skimmer are positive, noise is a concern though.
|
11/14/2014, 10:18 PM | #93 |
Registered Member
Join Date: Sep 2013
Location: Boca Raton, FL
Posts: 58
|
I purchase a marine block 8x8x4 some time ago for this build. The only way i could get it to fit in the refugium section is length wise,what was i thinking! Can't return it, any ideas?
|
11/16/2014, 08:26 PM | #94 |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
Tested the sump with Herbie, it seems working. I need more time to test. All animals are transferred.
|
11/17/2014, 01:00 AM | #95 |
Registered Member
Join Date: Jan 2007
Location: menifee So cal
Posts: 11,042
|
any ideas
|
11/18/2014, 06:38 PM | #96 |
Registered Member
Join Date: Aug 2012
Location: Orange County Ca
Posts: 415
|
Tank looks good!
|
11/21/2014, 10:32 AM | #97 |
Registered Member
Join Date: Aug 2013
Location: Morgan Hill, CA
Posts: 172
|
I started to use the sump. 1260 is pretty quiet, but you can still hear the humming. I put some thin packaging foam under it, I will try other options. 4' headloss and the pump is on 90% and my 1/2' Herbie drain is 20% closed. These ball valves are hard to adjust. The valve on the drain is a $25 one, it acts the same with $6 one from Lowes. Flow is pretty nice, the overflow water level is low for my taste, I have falling water noise. If I fiddle with it, the emergency starts flowing. Stupid ball valve, can't fine tune it.
Next my sca302 skimmer will go in. I thought using my Aquamaxx hob-1 but it would be small. |
11/22/2014, 12:08 AM | #98 |
Registered Member
Join Date: Aug 2014
Location: Garden Grove, CA
Posts: 723
|
66g SCA
My 66g. I bought this system used. The stand had water damage so I built my own and had a custom sump made. I also upgraded from the sca301 to ConeS skimmer. I built my stand 6" taller since I hate to bend over, I'm now in the process of upgrading the return as it now seems underpowered. I do use it to power my 2 TLF150 reactors also. Lighting: 2 Ai Sol super blues with 4x24w t5 supplementation.
Day - Back when I had MH+t5 Night Its great to see all these other SCA tanks and setups. New to this forum, but have been using it via google since I started reef keeping. Last edited by Dino; 04/10/2018 at 04:50 AM. |
11/22/2014, 12:48 AM | #99 |
Registered Member
Join Date: Oct 2005
Location: Colorado
Posts: 1,955
|
Awesme looking tank, thanks for sharing Smite...I was somewhat considering a marineland 93gal (the 30in width sounded nice, but it's kinda tall, plus clear silicone, plus I would loose saphire, plus it would be more expensive).
Your 66gal just helps in reaffirming that I should get the 66gal as well. I feel like the dimensions offer a lot of possibilities for aquascaping (I like wide tanks, and 20in tall seems like it gives it a nice size).
__________________
cheers, jent d-_-b Current Tank Info: 66gal = 32x24x20 |
11/22/2014, 01:56 AM | #100 |
Registered Member
Join Date: Aug 2014
Location: Garden Grove, CA
Posts: 723
|
Thanks wetWolger. Its a great tank and with the sump its about 75-80g. Large enough for a broader choice in fish, but to not expensive to maintain with water changes, dosing ect.
SCA's 80g is pretty cool. Same footprint as the 66g but 4" taller. I noticed some people found this system noisy. I don't have much to compare it to but it really doesn't bother me. At first I was getting large random gulping sounds, so I backed the drain valve back to 3/4 of the way open and it has completely stopped. I can hear my skimmer and mp40 over everything else. |
|
|