Aquarium Log Sheet - Page 5

MojaveReefer · 11/10/2011, 03:48 PM

Quote:

Originally Posted by cheesebagger

May I have one please? Cheesebagger@yahoo.com thanks for your time.

You bet, sent one your way

-Sean

MojaveReefer · 11/10/2011, 03:49 PM

Quote:

Originally Posted by Danny Mac

danielmac13 at gmail dot com

Sent yours Danny

-Sean

robertjk7005 · 11/11/2011, 12:22 PM

could you send me one please? robertjk7005@yahoo.com

sslater0679 · 11/11/2011, 02:38 PM

I too would like one if you are still sending them out. sslater0679@gmail.com

Thanks, Spencer

MojaveReefer · 11/11/2011, 09:55 PM

Quote:

Originally Posted by robertjk7005

could you send me one please? robertjk7005@yahoo.com

In your inbox sir.

-Sean

MojaveReefer · 11/11/2011, 09:56 PM

Quote:

Originally Posted by sslater0679

I too would like one if you are still sending them out. sslater0679@gmail.com

Thanks, Spencer

Of course, I'll be sending them out as long as folks want it. Hope you like it

-Sean

bugs713 · 11/11/2011, 10:19 PM

Hey this Log Sheet is working out very well!!
Been using it for some weeks now and its great!
Good work and thanks again!

Kreeger1 · 11/11/2011, 10:35 PM

Could you send it my way. Kreeger1@yahoo.com
Thanks

RattlerSkin · 11/12/2011, 03:26 AM

Please send one my way also. gjmoreau3@gmail.com

You really should just put it on a file hosting server and save a lot of time and effort.

doctorgori · 11/12/2011, 07:30 AM

deleted; tried to contribute but photobucket not working ....arghhh

MojaveReefer · 11/12/2011, 08:17 AM

Doctorgori,
You're not hijacking, you're giving feedback and adding ideas, I appreciate that. I wanted to add a calculations sheet...I'm surprised it took this long for someone to bring it up. I was thinking that no one really wanted or needed it and was not going to add it unless some folks said they would like it.

The gallon conversion table is really easy, I could have that done in about 2 minutes. The recommended dosage for 2 part would be easy as well, I just need the formula. BRS has the formula and calculator on their site already, I would just need to help from the community to get the numbers because I am not currently dosing 2 part and have not needed to use such calculation. I would also need some numbers to work with on the flow calculations.

Conditional formatting can be added to anything, I just need some feedback on what everyone would like to see. I had conditional formatting on this sheet for all the parameters...if they were close to tolerances the box would highlight yellow, on target was a green box, out of tolerance was red. I felt like it might be overkill and I took it off before releasing it. That being said if it is something people would like to have on there it is very easy for me to make those changes, all I need is community feedback...and help with formulas for some of the calculations.

-Sean

Thisseemsfishy · 11/12/2011, 11:04 AM

Would you please send me the most updated copy! jsho27@gmail.com

Thank you so much!

Jof · 11/12/2011, 11:42 AM

Hi,
Can you forward me a copy?

Thanks!!

Bugcrusher · 11/12/2011, 02:55 PM

Bugcrusher@verizon.netMe too if you please...

MojaveReefer · 11/13/2011, 11:59 AM

Haven't forgotten about you guys, just have not been home in the last day to send it out. I'll be home after work today and I'll get them right out to you.

-Sean

MojaveReefer · 11/13/2011, 12:06 PM

Quote:

Originally Posted by Jof

Hi,
Can you forward me a copy?

Thanks!!

Jof I'll need an email address to send it to. You can post it here or PM it to me.

Richard Reefer · 11/13/2011, 12:12 PM

Could you send me a copy too please?

reeferrich@gmail.com

Thank you.

Thisseemsfishy · 11/13/2011, 12:28 PM

Thank you

Quote:

Originally Posted by MojaveReefer

Haven't forgotten about you guys, just have not been home in the last day to send it out. I'll be home after work today and I'll get them right out to you.

-Sean

Scooby1 · 11/13/2011, 03:41 PM

Quote:

Originally Posted by MojaveReefer

Doctorgori,
You're not hijacking, you're giving feedback and adding ideas, I appreciate that. I wanted to add a calculations sheet...I'm surprised it took this long for someone to bring it up. I was thinking that no one really wanted or needed it and was not going to add it unless some folks said they would like it.

The gallon conversion table is really easy, I could have that done in about 2 minutes. The recommended dosage for 2 part would be easy as well, I just need the formula. BRS has the formula and calculator on their site already, I would just need to help from the community to get the numbers because I am not currently dosing 2 part and have not needed to use such calculation. I would also need some numbers to work with on the flow calculations.

Conditional formatting can be added to anything, I just need some feedback on what everyone would like to see. I had conditional formatting on this sheet for all the parameters...if they were close to tolerances the box would highlight yellow, on target was a green box, out of tolerance was red. I felt like it might be overkill and I took it off before releasing it. That being said if it is something people would like to have on there it is very easy for me to make those changes, all I need is community feedback...and help with formulas for some of the calculations.

-Sean

Hi I have a very basic version of yours Sean and use conditional formating, provides a visual indication straight away without having to refer to the values at the top of the page. I have downloaded yours far better than mine

How about adding the upper and lower limits to the graphs??

Nick
England, UK

MojaveReefer · 11/13/2011, 04:52 PM

Quote:

Originally Posted by Thisseemsfishy

Would you please send me the most updated copy! jsho27@gmail.com

Thank you so much!

Sent one over your way, sorry for the delay

-Sean

MojaveReefer · 11/13/2011, 04:53 PM

Quote:

Originally Posted by Bugcrusher

Bugcrusher@verizon.netMe too if you please...

Sent it to you Bugcrusher, sorry for the delay

-Sean

MojaveReefer · 11/13/2011, 04:54 PM

Quote:

Originally Posted by Richard Reefer

Could you send me a copy too please?

reeferrich@gmail.com

Thank you.

You got it Richard. Hope you like it

-Sean

MojaveReefer · 11/13/2011, 04:56 PM

Quote:

Originally Posted by Scooby1

Hi I have a very basic version of yours Sean and use conditional formating, provides a visual indication straight away without having to refer to the values at the top of the page. I have downloaded yours far better than mine

How about adding the upper and lower limits to the graphs??

Nick
England, UK

Nick,
Thank you for the feedback. I think that is a great idea, I added it to the versions I sent out today. Let me know if you'd like an updated copy.

-Sean

Scooby1 · 11/13/2011, 05:26 PM

Quote:

Originally Posted by MojaveReefer

Nick,
Thank you for the feedback. I think that is a great idea, I added it to the versions I sent out today. Let me know if you'd like an updated copy.

-Sean

Yes please Sean,

My email address is nickmisc@btinternet.com

Thanks
Nick

MojaveReefer · 11/13/2011, 06:22 PM

Quote:

Originally Posted by Scooby1

Yes please Sean,

My email address is nickmisc@btinternet.com

Thanks
Nick

Thanks again for the idea Nick. I also added links to great system volume and chemistry calculators

-Sean

11/11/2011, 12:22 PM	#103
robertjk7005 Registered Member Join Date: May 2011 Location: Piscataway, nj Posts: 152	could you send me one please? robertjk7005@yahoo.com __________________ 120Gal mixed reef tank w/ 50Gal sump/refuge, chinese led lights, Euroreef skimmer, 200lbs LR, 80LBs fiji sand.

11/11/2011, 10:19 PM	#107
bugs713 In-A-Gadda-Divita! Join Date: Sep 2011 Location: Apache Junction, AZ - USA Posts: 2,345	Hey this Log Sheet is working out very well!! Been using it for some weeks now and its great! Good work and thanks again! __________________ O\|\|\|\|\|\|\|O

11/11/2011, 10:35 PM	#108
Kreeger1 KING LEAR Join Date: Jan 2002 Location: Cleveland Ohio area Posts: 7,428	Could you send it my way. Kreeger1@yahoo.com Thanks __________________ Coming up on 25 years in this hobby...That's a lot of skimmate Current Tank Info: Dsa 135

11/12/2011, 07:30 AM	#110
doctorgori Moved On Join Date: Jun 2011 Location: Simon Bar-Sinistar Posts: 1,097	deleted; tried to contribute but photobucket not working ....arghhh Last edited by doctorgori; 11/12/2011 at 08:01 AM.

11/12/2011, 08:17 AM	#111
MojaveReefer Aquarium Log Guy Join Date: Aug 2011 Location: Mohave Desert Posts: 346	Doctorgori, You're not hijacking, you're giving feedback and adding ideas, I appreciate that. I wanted to add a calculations sheet...I'm surprised it took this long for someone to bring it up. I was thinking that no one really wanted or needed it and was not going to add it unless some folks said they would like it. The gallon conversion table is really easy, I could have that done in about 2 minutes. The recommended dosage for 2 part would be easy as well, I just need the formula. BRS has the formula and calculator on their site already, I would just need to help from the community to get the numbers because I am not currently dosing 2 part and have not needed to use such calculation. I would also need some numbers to work with on the flow calculations. Conditional formatting can be added to anything, I just need some feedback on what everyone would like to see. I had conditional formatting on this sheet for all the parameters...if they were close to tolerances the box would highlight yellow, on target was a green box, out of tolerance was red. I felt like it might be overkill and I took it off before releasing it. That being said if it is something people would like to have on there it is very easy for me to make those changes, all I need is community feedback...and help with formulas for some of the calculations. -Sean __________________ Sean

11/11/2011, 02:38 PM	#104
sslater0679 Registered Member Join Date: Sep 2010 Location: Claremore, OK Posts: 94	I too would like one if you are still sending them out. sslater0679@gmail.com Thanks, Spencer

11/12/2011, 03:26 AM	#109
RattlerSkin Registered Member Join Date: Jul 2011 Posts: 105	Please send one my way also. gjmoreau3@gmail.com You really should just put it on a file hosting server and save a lot of time and effort.

11/12/2011, 11:04 AM	#112
Thisseemsfishy Just another Reefer Join Date: Feb 2009 Location: Kentucky, USA Posts: 715	Would you please send me the most updated copy! jsho27@gmail.com Thank you so much! __________________ -the Sho "Success is a science; if you have the conditions, you get the result." -Oscar Wilde "The best thing a man can do when he is losing is just give up!" -Matt Stimson Current Tank Info: 65g Reef, 265w Cree LED Lighting, 20g DIY Sump/Fuge, Euro-Reef CS6-1 Skimmer, 2 Little Fishes GFO Reactor \|\|\|\|\| Mostly SPS and a few LPS, Zoa's, and Shrooms

11/12/2011, 11:42 AM	#113
Jof Registered Member Join Date: Nov 2011 Posts: 1	Hi, Can you forward me a copy? Thanks!!

11/12/2011, 02:55 PM	#114
Bugcrusher Registered Member Join Date: Nov 2005 Location: Lakeland, FL Posts: 129	Bugcrusher@verizon.netMe too if you please...

11/13/2011, 11:59 AM	#115
MojaveReefer Aquarium Log Guy Join Date: Aug 2011 Location: Mohave Desert Posts: 346	Haven't forgotten about you guys, just have not been home in the last day to send it out. I'll be home after work today and I'll get them right out to you. -Sean __________________ Sean

11/13/2011, 12:12 PM	#117
Richard Reefer Registered Member Join Date: Oct 2009 Location: Summerville, SC Posts: 151	Could you send me a copy too please? reeferrich@gmail.com Thank you. __________________ Shallow & Rimless

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody have a good log sheet they use?	sbonder	New to the Hobby	4	02/24/2010 11:25 AM
looking for printable water parameter log sheet	cdbias2	The Reef Chemistry Forum	3	05/10/2007 06:30 PM
saltwater log sheets	robcropper	Reef Discussion	4	12/18/2006 07:49 AM
saltwater log sheets	robcropper	New to the Hobby	1	12/17/2006 11:00 PM
Excel Spreadsheet for Reef Aquarium Logging	theop	Reef Discussion	8	01/27/2006 05:15 PM