Digital Aquatics Archon Owners Thread - Page 77

NOTCHBOY · 05/08/2018, 12:23 PM

n2585722 I have yet another question.

is it possible to login and monitor temps and look at graphs while maybe your at work and no where close to archon network?

n2585722 · 05/08/2018, 06:30 PM

Quote:

Originally Posted by NOTCHBOY

n2585722 I have yet another question.

is it possible to login and monitor temps and look at graphs while maybe your at work and no where close to archon network?

I do it all the time. You will need a ddns service and have your router setup correctly to do this. I go over settings in the router on my build thread. I have a Asus router so yours might be a little different on setup.

shellsea · 06/16/2018, 09:35 PM

Well I changed my internet provider again and am back in the same boat I was long time ago. I had same issue a few years back and don’t recall how I resolved it. Can’t find archon network on wi-fi to reprogram new Wi-fi settings. Powered down. Tried reset button. The archon does not show up when I look for it on wi-fi networks.
Any ideas anyone?

Sent from my iPad using Tapatalk

shellsea · 06/17/2018, 07:40 AM

Quote:

Originally Posted by shellsea

Well I changed my internet provider again and am back in the same boat I was long time ago. I had same issue a few years back and don’t recall how I resolved it. Can’t find archon network on wi-fi to reprogram new Wi-fi settings. Powered down. Tried reset button. The archon does not show up when I look for it on wi-fi networks.
Any ideas anyone?

Sent from my iPad using Tapatalk

Got it. Was not hitting the reset button head on I guess. Better aim thin morning.

Sent from my iPhone using Tapatalk

n2585722 · 06/17/2018, 08:44 AM

The Archon wifi network should show up without resetting. I should be on all the time with newer software. On my iPad it does take a few minutes sometimes to actually show on the list. I guess the iPad has go go through all the channels to find it.

shellsea · 06/17/2018, 10:46 AM

Quote:

Originally Posted by n2585722

The Archon wifi network should show up without resetting. I should be on all the time with newer software. On my iPad it does take a few minutes sometimes to actually show on the list. I guess the iPad has go go through all the channels to find it.

Thanks.it is showing up now and I can get into it. Still have an issue connecting to my home WiFi network though. Double checked pass word and that is right but when I hit Update the archon just kind of stalls out on me. I’ll keep trying but any tips are appreciated.

Sent from my iPhone using Tapatalk

n2585722 · 06/17/2018, 10:51 AM

Are you using the correct security setting for your router?

Sent from my iPad using Tapatalk

shellsea · 06/17/2018, 04:27 PM

Quote:

Originally Posted by n2585722

Are you using the correct security setting for your router?

Sent from my iPad using Tapatalk

I tried it with none, then each of the 3 options. Looked up the router and saw it works with either wpa or wpa2. I’m sure it’s something dumb. I’m not a high tech guy, but gosh this is so simple and I have done it with 2 other wi-fi networks in the past.

Sent from my iPad using Tapatalk

n2585722 · 06/17/2018, 04:40 PM

I have my router setup for wpa2. It is an Asus router. I am not too familiar with the other brands though. The only other thing is making sure your password is correct. You do know that once the page is refreshed that your settings will disappear. This is normal.

bigzman · 06/18/2018, 10:06 AM

Since we are on the router topic is there a way to switch my archon not to broadcast in 2.4ghz. Around my house the 2.4ghz is saturated. I use 5ghz for everything else.

n2585722 · 06/18/2018, 07:41 PM

Quote:

Originally Posted by bigzman

Since we are on the router topic is there a way to switch my archon not to broadcast in 2.4ghz. Around my house the 2.4ghz is saturated. I use 5ghz for everything else.

Not that I know of.

pwest · 06/29/2018, 02:09 PM

I see that many of you are running 1.09.70, but I'm at '.68. It's been a long time since I upgraded, but, as I remember, the 'System' page used to tell me what version I was running and let me know if an update was available. I don't see that anymore--it just lists the Software/Hardware/Package versions.

What's the proper way to upgrade now, and should I risk it given the tenuous state of DA tech support?

-Phil

n2585722 · 07/01/2018, 06:24 AM

There may be more to it than just putting the current versions on you USB drive. I don't remember how far back that version was. Have you tried to contact DA support via email?

jason2459 · 07/21/2018, 06:05 PM

Is DA no more? Is the Archon developers going to split off and continue?

bigzman · 07/21/2018, 06:10 PM

I checked in with the beta group doesn't seem like it's coming back da at this point it's pretty much gone

n2585722 · 07/21/2018, 07:33 PM

Looks like I found a second source for the salinity probe https://aperainst.com/apera-instrume...-polycarbonate. I am still working on the temp probe. The pH and ORP probes are common. Pinpoint probes will work fine for those.

bigzman · 07/31/2018, 05:02 AM

Anyone the files for factory reset an archon? Also instructions to calibrate salinity probe.

n2585722 · 07/31/2018, 11:53 AM

Quote:

Originally Posted by bigzman

Anyone the files for factory reset an archon? Also instructions to calibrate salinity probe.

You should not need any files other than what is already on the USB stick to do a factory reset. Save what is on the USB stick to a folder on your computer first. Why do you need to do a factory reset?

Sent from my XT1056 using Tapatalk

bigzman · 07/31/2018, 03:17 PM

Quote:

Originally Posted by n2585722

You should not need any files other than what is already on the USB stick to do a factory reset. Save what is on the USB stick to a folder on your computer first. Why do you need to do a factory reset?

0
Sent from my XT1056 using Tapatalk

Thinking about buying a back up unit to have just incase. Still need to learn how to calibrate orp and salinity. Eric was helping me with that.

n2585722 · 07/31/2018, 03:39 PM

Salinity is a two point calibration. The first is probe in air. That is the 0 point. For the 35 point you will need the cal fluid. Pinpoint cal fluid will work for this. You will need to place both the salinity probe and the temp probe from the same SL2 placed in the cal fluid. Make sure it is close to your normal tank temp as temp will cause the reading to vary.

The ORP has to be done with the PortCalibrate() command for the Archon ports. I go through the PortCalibrate command on my build thread. Unfortunately I cannot post a link to it on this forum. One point is 0 on it this is the ORP input shorted without a probe connected. The other is usually 400 or what ever your calibration fluid is. I use a BNC terminator for the 0 reading I think it has a 50ohm resistor. It will more than likely be 50 or 75ohms either will work. The modules other than the Archon still have single point ORP calibration if they have the ORP input. Not sure why they took it off the Archon.

Goldenrevo · 10/09/2018, 05:10 AM

Hi all,

I changed the default password on my archon setup and cannot remember it.

Can someone please help me get back in without having to reset up everything??

Much appreciated!!

Thanks

n2585722 · 10/09/2018, 05:56 AM

There is a file on the USB memory stick that has your password. I will have to look when I get back home and let you know the name and where it is.

Sent from my iPad using Tapatalk

n2585722 · 10/09/2018, 08:44 AM

OK, if you haven't already pull the USB memory stick from the Archon and connect it to your computer and copy it to an empty folder on your computer drive as a backup. Be careful and make sure you just copy it. Now you can remove the memory stick from your computer and install it back into the Archon. No go to the folder where you saved the files and Select the "db" folder. There is a file "accesslist.txt" open this file. There should be a statement that starts with "admin=XXXXXXXXXX:XXXXXXXXXXX;. The first set of XXXXXXXX will instead on our file be the name the second set of XXXXXXXX will instead be your password. Hope this helps.

n2585722 · 10/10/2018, 06:18 PM

Quote:

Originally Posted by Goldenrevo

Hi all,

I changed the default password on my archon setup and cannot remember it.

Can someone please help me get back in without having to reset up everything??

Much appreciated!!

Thanks

Did my previous post help you retrieve your password?

Goldenrevo · 10/17/2018, 09:46 PM

Thanks so much!

It worked, I’m now back in but now I have a new problem...

I had to setup my wireless settings on the archon.. once I hit save it restarts the Archon but doesn’t save the wifi settings..

To confirm, all I’m entering is the network, encryption and password..

Am I missing something ?

06/16/2018, 09:35 PM	#1903
shellsea Registered Member Join Date: Sep 2012 Location: Destin, Fl. Posts: 479	Well I changed my internet provider again and am back in the same boat I was long time ago. I had same issue a few years back and don’t recall how I resolved it. Can’t find archon network on wi-fi to reprogram new Wi-fi settings. Powered down. Tried reset button. The archon does not show up when I look for it on wi-fi networks. Any ideas anyone? Sent from my iPad using Tapatalk __________________ Jack "Shellsea" 120 mixed reef, Reef Breeder Photon 48, Apex and a proud owner of a Lifereef Skimmer

06/18/2018, 10:06 AM	#1910
bigzman Registered Member Join Date: Dec 2002 Location: New Tampa FL Posts: 2,807	Since we are on the router topic is there a way to switch my archon not to broadcast in 2.4ghz. Around my house the 2.4ghz is saturated. I use 5ghz for everything else. __________________ 330g SPS - LED/T5 - EShopp S-300 Skimmer - 4 x Jebao PP20- reefkeeper elite Current Tank Info: 210 gallon mixed reef lps sps

06/29/2018, 02:09 PM	#1912
pwest Registered Member Join Date: Jun 2002 Location: Atlanta, GA Posts: 51	I see that many of you are running 1.09.70, but I'm at '.68. It's been a long time since I upgraded, but, as I remember, the 'System' page used to tell me what version I was running and let me know if an update was available. I don't see that anymore--it just lists the Software/Hardware/Package versions. What's the proper way to upgrade now, and should I risk it given the tenuous state of DA tech support? -Phil __________________ -Phil

07/21/2018, 06:05 PM	#1914
jason2459 Registered Member Join Date: Jul 2009 Location: Iowa Posts: 9,671	Is DA no more? Is the Archon developers going to split off and continue? __________________ rebuild and recovery log: No more red house, you'll have to click on my name and visit my homepage! You can check out my parameters at reeftronics dot net website and look for my username. Current Tank Info: 180g mixed reef w/ a beananimal overflow to a dolomite RRUGF. \| 20g long G. Smithii Mantis Tank

07/21/2018, 06:10 PM	#1915
bigzman Registered Member Join Date: Dec 2002 Location: New Tampa FL Posts: 2,807	I checked in with the beta group doesn't seem like it's coming back da at this point it's pretty much gone __________________ 330g SPS - LED/T5 - EShopp S-300 Skimmer - 4 x Jebao PP20- reefkeeper elite Current Tank Info: 210 gallon mixed reef lps sps

05/08/2018, 12:23 PM	#1901
NOTCHBOY Registered Member Join Date: Sep 2003 Location: RIVERSIDE Posts: 9	n2585722 I have yet another question. is it possible to login and monitor temps and look at graphs while maybe your at work and no where close to archon network?

06/17/2018, 08:44 AM	#1905
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	The Archon wifi network should show up without resetting. I should be on all the time with newer software. On my iPad it does take a few minutes sometimes to actually show on the list. I guess the iPad has go go through all the channels to find it.

06/17/2018, 10:51 AM	#1907
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	Are you using the correct security setting for your router? Sent from my iPad using Tapatalk

06/17/2018, 04:40 PM	#1909
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	I have my router setup for wpa2. It is an Asus router. I am not too familiar with the other brands though. The only other thing is making sure your password is correct. You do know that once the page is refreshed that your settings will disappear. This is normal.

07/01/2018, 06:24 AM	#1913
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	There may be more to it than just putting the current versions on you USB drive. I don't remember how far back that version was. Have you tried to contact DA support via email?

07/21/2018, 07:33 PM	#1916
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	Looks like I found a second source for the salinity probe https://aperainst.com/apera-instrume...-polycarbonate. I am still working on the temp probe. The pH and ORP probes are common. Pinpoint probes will work fine for those.

07/31/2018, 05:02 AM	#1917
bigzman Registered Member Join Date: Dec 2002 Location: New Tampa FL Posts: 2,807	Anyone the files for factory reset an archon? Also instructions to calibrate salinity probe. __________________ 330g SPS - LED/T5 - EShopp S-300 Skimmer - 4 x Jebao PP20- reefkeeper elite Current Tank Info: 210 gallon mixed reef lps sps

07/31/2018, 03:39 PM	#1920
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	Salinity is a two point calibration. The first is probe in air. That is the 0 point. For the 35 point you will need the cal fluid. Pinpoint cal fluid will work for this. You will need to place both the salinity probe and the temp probe from the same SL2 placed in the cal fluid. Make sure it is close to your normal tank temp as temp will cause the reading to vary. The ORP has to be done with the PortCalibrate() command for the Archon ports. I go through the PortCalibrate command on my build thread. Unfortunately I cannot post a link to it on this forum. One point is 0 on it this is the ORP input shorted without a probe connected. The other is usually 400 or what ever your calibration fluid is. I use a BNC terminator for the 0 reading I think it has a 50ohm resistor. It will more than likely be 50 or 75ohms either will work. The modules other than the Archon still have single point ORP calibration if they have the ORP input. Not sure why they took it off the Archon.

10/09/2018, 05:10 AM	#1921
Goldenrevo Registered Member Join Date: Oct 2017 Posts: 3	Help - Forgot Password Hi all, I changed the default password on my archon setup and cannot remember it. Can someone please help me get back in without having to reset up everything?? Much appreciated!! Thanks

10/09/2018, 05:56 AM	#1922
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	There is a file on the USB memory stick that has your password. I will have to look when I get back home and let you know the name and where it is. Sent from my iPad using Tapatalk

10/09/2018, 08:44 AM	#1923
n2585722 Registered Member Join Date: Aug 2008 Location: Cedar Park, Tx Posts: 1,072	OK, if you haven't already pull the USB memory stick from the Archon and connect it to your computer and copy it to an empty folder on your computer drive as a backup. Be careful and make sure you just copy it. Now you can remove the memory stick from your computer and install it back into the Archon. No go to the folder where you saved the files and Select the "db" folder. There is a file "accesslist.txt" open this file. There should be a statement that starts with "admin=XXXXXXXXXX:XXXXXXXXXXX;. The first set of XXXXXXXX will instead on our file be the name the second set of XXXXXXXX will instead be your password. Hope this helps.

10/17/2018, 09:46 PM	#1925
Goldenrevo Registered Member Join Date: Oct 2017 Posts: 3	Thanks so much! It worked, I’m now back in but now I have a new problem... I had to setup my wireless settings on the archon.. once I hit save it restarts the Archon but doesn’t save the wifi settings.. To confirm, all I’m entering is the network, encryption and password.. Am I missing something ?