GHL Mitras Club - Page 80

pking13 · 06/16/2016, 12:25 AM

sori i havent reach 10 post so cannot pm bro.my email is liliagusgunawan@yahoo.com
thx u bro

echoreef · 06/16/2016, 01:37 PM

Quote:

Originally Posted by pking13

sori i havent reach 10 post so cannot pm bro.my email is liliagusgunawan@yahoo.com
thx u bro

I have emailed you 3 projects including 2 popular ones that have been passed around over the years. Give it a try once you get the connection to the software.

pking13 · 06/17/2016, 09:02 AM

Thx u bro ecoreef.
I really appreciate that
I will try it

pking13 · 06/19/2016, 07:00 AM

[QUOTE=ReefRockerLive;24551952]If you do not see "GHL Virtual Communications" listed in Device Manager when the Mitras is connected via USB, then you will have to manually install the driver.

Here's how to do it:

1. Go to "This PC" and select your hard drive
2. Double-click on "Program Files x86"
3. Double-click on "GHL Control Center Vxxx" *Your newest version of GCC
4. Double-click on "Driver"
5. Select "dpinst_x86" or x64 and follow the install prompts.

Once that is done, you can go back to GCC and connect.

Make sure that you either have the Mitras connection in GCC either set to Auto or match the COM number of the GHL comm. driver.[/QUOTE

i already tried this but still cannot.
is there any other way to connect with my mitras?

quan325i · 06/19/2016, 07:47 AM

[QUOTE=pking13;24586840]

Quote:

Originally Posted by ReefRockerLive

If you do not see "GHL Virtual Communications" listed in Device Manager when the Mitras is connected via USB, then you will have to manually install the driver.

Here's how to do it:

1. Go to "This PC" and select your hard drive
2. Double-click on "Program Files x86"
3. Double-click on "GHL Control Center Vxxx" *Your newest version of GCC
4. Double-click on "Driver"
5. Select "dpinst_x86" or x64 and follow the install prompts.

Once that is done, you can go back to GCC and connect.

Make sure that you either have the Mitras connection in GCC either set to Auto or match the COM number of the GHL comm. driver.[/QUOTE

i already tried this but still cannot.
is there any other way to connect with my mitras?

I just did this yesterday. You have to set the right COM instead of using the "auto" option. The COM number is in the device manager for the GHL virtual com. Mine is 4.

pking13 · 06/19/2016, 11:52 PM

[QUOTE=quan325i;24586911]

Quote:

Originally Posted by pking13

I just did this yesterday. You have to set the right COM instead of using the "auto" option. The COM number is in the device manager for the GHL virtual com. Mine is 4.

ow so i need try to pick the com instead using auto.
oke i will try it later..thx u bro for the reply

jimmy n · 07/13/2016, 08:47 PM

It is not very intuitive, but worth it once you get it done.

keneil01 · 07/14/2016, 03:24 PM

I am in a fem days goint to place an order for some mitras and a PLM-PWC card. Can this card be placed in a expansion box or does it needs to be inside the P3? What is the "range" for this card?

I have my filtersystem in the basememt, and the display in the floor above (expansion box).

danrobberg · 07/14/2016, 03:52 PM

Did you guys see the new price through August 1? Wow. At that price if I didn't just switch to t5 I would have bought a second unit and hung both over my tank.

ReefRockerLive · 07/14/2016, 04:36 PM

Wow at $639.90 these are cheaper than Radion Pro fixtures. Better spread, better color blending, more intense lighting, more functions for less? Wow!

4reason · 07/15/2016, 02:17 AM

Prelude to new model release?

pking13 · 08/01/2016, 08:02 PM

hmm i still cannot connect my mitras to my comp..
its seem that the port undetect .
any one have problem like me? thx u before

slief · 08/01/2016, 08:08 PM

Quote:

Originally Posted by pking13

hmm i still cannot connect my mitras to my comp..
its seem that the port undetect .
any one have problem like me? thx u before

You need to be using the correct com port. With the light connected and powered on, go to device manager and look COM & LPT. Click on that and in there should be a USB device with a com number next to it. See photo below.

Marco@GHLUSA · 08/01/2016, 08:08 PM

Quote:

Originally Posted by pking13

hmm i still cannot connect my mitras to my comp..
its seem that the port undetect .
any one have problem like me? thx u before

Hello - unfamiliar with the issue you are experiencing.
I'd be glad to assist... Please PM me.

pking13 · 08/02/2016, 08:49 PM

@slief i already search that but the port is undetect.
so i cannot find what com is that .
mitras use usb port version 2.0 maybe because of that?

slief · 08/02/2016, 11:06 PM

Quote:

Originally Posted by pking13

@slief i already search that but the port is undetect.
so i cannot find what com is that .
mitras use usb port version 2.0 maybe because of that?

It could be that or it could be that you still need to load the driver. Do you have an exclamation mark in your device manager under one of the lines?

Defiant Arms · 08/03/2016, 12:41 AM

I'm curious if i will be able to remote in to my Vertex cerebra with my mac and have the light plugged into the cerebra and control it like that.

pking13 · 08/03/2016, 08:05 PM

Quote:

Originally Posted by slief

It could be that or it could be that you still need to load the driver. Do you have an exclamation mark in your device manager under one of the lines?

exclamation mark? i already install manual for driver.but still cannot.
so im really frustated....hahaha..
anyone can help me?the port still undetect in my laptop.

Marco@GHLUSA · 08/03/2016, 08:50 PM

Quote:

Originally Posted by pking13

exclamation mark? i already install manual for driver.but still cannot.
so im really frustated....hahaha..
anyone can help me?the port still undetect in my laptop.

Yes - can you please PM me your email address.

Defiant Arms · 08/03/2016, 10:07 PM

Quote:

Originally Posted by echoreef

I have emailed you 3 projects including 2 popular ones that have been passed around over the years. Give it a try once you get the connection to the software.

would you send me the projects as well please?

JLittle@BearDefense.com

Thank You!

ReefClownMIA · 08/03/2016, 10:25 PM

Quote:

Originally Posted by Defiant Arms

would you send me the projects as well please?

JLittle@BearDefense.com

Thank You!

Some were posted over on the GHL forum yesterday.
http://forum.aquariumcomputer.com/sh...0343#post70343

Defiant Arms · 08/03/2016, 10:59 PM

Quote:

Originally Posted by ReefClownMIA

Some were posted over on the GHL forum yesterday.
http://forum.aquariumcomputer.com/sh...0343#post70343

Thank You!

oscar650 · 08/13/2016, 09:55 PM

Quote:

Originally Posted by oscar650

Just upgraded my 24" cube 10 days ago to the new reefer 525 XL with 2 Mitras 6200HV.

love the lights and the tank.

I am looking for projects or ideas on how to set the lights.

the tank is a mix reef with some SPS.

thank you all

It's been about two month and I am still very happy with the lights

Defiant Arms · 08/13/2016, 10:22 PM

they are supposed to be coming out with arm style mounts in the next few months similar to the 6061

ClownReef® · 08/26/2016, 03:22 PM

Has anybody successfully been able to run their Mitras on an Apple computer without running Windows on it?

07/14/2016, 04:36 PM	#1985
ReefRockerLive GHL Mitras LX7 Club Join Date: Nov 2003 Location: CT Posts: 2,454 Blog Entries: 1	Wow at $639.90 these are cheaper than Radion Pro fixtures. Better spread, better color blending, more intense lighting, more functions for less? Wow! __________________ -ReefRockerLive Current Tank Info: Rimless 67g \| GHL Profilux 3.1T eX \| 2x GHL Doser 2 dosers \| 2xGHL Mitras LX7 LED \| Abyzz a100 \| Bubble King DC 150 \| 2x Vortech MP40w QD \| Fauna Marin Zeomatic 2.2ltr \| Fauna Marin Zeolight System \| Fauna Marin Balling Light Method

08/26/2016, 03:22 PM	#2000
ClownReef® Bubbletrousing Join Date: Feb 2006 Location: San Antonio, Texas Posts: 1,872	Has anybody successfully been able to run their Mitras on an Apple computer without running Windows on it? __________________ Waterbox Peninsula 5526 l Ecotech Radion XR30w G4 l Ecotech Vectra M1 l MP40QDW l Vertex Omega 180i l Tunze ATO l Apex Fusion l DOS l Trident l Ice Cap Scrubber

06/16/2016, 12:25 AM	#1976
pking13 Registered Member Join Date: May 2016 Posts: 12	sori i havent reach 10 post so cannot pm bro.my email is liliagusgunawan@yahoo.com thx u bro

06/17/2016, 09:02 AM	#1978
pking13 Registered Member Join Date: May 2016 Posts: 12	Thx u bro ecoreef. I really appreciate that I will try it

06/19/2016, 07:00 AM	#1979
pking13 Registered Member Join Date: May 2016 Posts: 12	[QUOTE=ReefRockerLive;24551952]If you do not see "GHL Virtual Communications" listed in Device Manager when the Mitras is connected via USB, then you will have to manually install the driver. Here's how to do it: 1. Go to "This PC" and select your hard drive 2. Double-click on "Program Files x86" 3. Double-click on "GHL Control Center Vxxx" *Your newest version of GCC 4. Double-click on "Driver" 5. Select "dpinst_x86" or x64 and follow the install prompts. Once that is done, you can go back to GCC and connect. Make sure that you either have the Mitras connection in GCC either set to Auto or match the COM number of the GHL comm. driver.[/QUOTE i already tried this but still cannot. is there any other way to connect with my mitras?

07/13/2016, 08:47 PM	#1982
jimmy n Registered Member Join Date: Mar 2000 Location: Reno, NV Posts: 1,256	It is not very intuitive, but worth it once you get it done.

07/14/2016, 03:24 PM	#1983
keneil01 Registered Member Join Date: Oct 2009 Posts: 8	I am in a fem days goint to place an order for some mitras and a PLM-PWC card. Can this card be placed in a expansion box or does it needs to be inside the P3? What is the "range" for this card? I have my filtersystem in the basememt, and the display in the floor above (expansion box).

07/14/2016, 03:52 PM	#1984
danrobberg Registered Member Join Date: May 2009 Location: Buffalo NY Posts: 962	Did you guys see the new price through August 1? Wow. At that price if I didn't just switch to t5 I would have bought a second unit and hung both over my tank.

07/15/2016, 02:17 AM	#1986
4reason Registered Member Join Date: Oct 2009 Location: San Jose, CA Posts: 35	Prelude to new model release?

08/01/2016, 08:02 PM	#1987
pking13 Registered Member Join Date: May 2016 Posts: 12	hmm i still cannot connect my mitras to my comp.. its seem that the port undetect . any one have problem like me? thx u before

08/02/2016, 08:49 PM	#1990
pking13 Registered Member Join Date: May 2016 Posts: 12	@slief i already search that but the port is undetect. so i cannot find what com is that . mitras use usb port version 2.0 maybe because of that?

08/03/2016, 12:41 AM	#1992
Defiant Arms Registered Member Join Date: Jul 2016 Posts: 39	I'm curious if i will be able to remote in to my Vertex cerebra with my mac and have the light plugged into the cerebra and control it like that.

08/13/2016, 10:22 PM	#1999
Defiant Arms Registered Member Join Date: Jul 2016 Posts: 39	they are supposed to be coming out with arm style mounts in the next few months similar to the 6061