|
|
|
11/06/2019, 11:57 AM
|
#1 |
|
Registered Member
Join Date: Nov 2019
Location: Belgium
Posts: 1
|
High magnesium level while dosing Component 1+2+3+
Hi,
I dose Component 1+2+3+ but my Mg is at 1500 and does not drop, can I let it out from component 3+ (self-mix) until Mg has dropped to an acceptable level? |
|
|
|
11/12/2019, 06:11 AM
|
#2 |
|
RC Sponsor
 
Join Date: Aug 2015
Posts: 558
|
Hello,
If you have no consumption of Magnesium you can mix your own Component 1+2+3+ without Magnesium but in well running aquarium it should be Magnesium consumption. If Magnesium consumption is low you can dose Component 1+2+3+ equally in small amount to keep Magnesium stable and add more Calcium or KH as you can read on our website: Dosage: needs to be adjusted according to the consumption of macro-nutrients, and based on critical water parameters like Calcium, Magnesium and KH. If one or two parameters are still not balanced- we recommend to continue with administering equal doses of each component, and take advantage of one of our additives (Calcium, Magnesium, KH Buffer) to restore desired level(s). Please look at Component 1+2+3+ recipe in our guide, page 14: https://aquaforest.eu/wp-content/upl...B_02.01.19.pdf |
|
|
|
 |
|
|
