Reef Central Online Community

Go Back   Reef Central Online Community > Coral Forums > Non-Photosynthetic Corals
Blogs FAQ Calendar

Notices

User Tag List

Reply
Thread Tools
Unread 12/19/2009, 01:03 PM   #1
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
Continuous feeding NPS filter feeders

With some new NPS tanks being set up (on here and other forums) I wanted to document the 2 methods of feeding that I think work best.

I am continuing to use the syringe pump for Shellfish Diet and Roti-Feast:

This is self explanatory - just spend money, plug in and enjoy!

But I have also started using a kalk reactor to dose my own variation of Danny Dame's recipe.

So this method is nothing new but here is a step by step on how easy it is to make it work.

First, you blend up a mixture of the foods (see the link above). In my recipe, I also use squid juice and oyster juice as a "smelling sauce" for the corals. I use more RO/DI water as I want this to be very dilute. Also, I use very little Ultra Pac as this has been replaced by Ultra Min D. I still use it because I have 2 bottles left and don't want to waste it.
Let the mixture sit 24 hrs and get stinky. This is what it looks like:


As you can see the problem is that gravity makes the mixture separate. If you were to use a syringe pump for this, the dose rate would have to be pretty fast or you would get a very inconsistent mixture, especially if the syringe pump is pushing the food vertically upwards. You want the consistency to be like this:


So this is where a kalk reactor is handy as it can continuously keep the mixture suspended as it is dosed into the tank. A kalk reactor that uses a small pump for mixing is better than a kalk stirrer that uses a magnetic stirrer as this is not powerful enough. The only modification I had to do was add a T and a ball valve to the inlet tube:


Now I simply draw up the food mixture into a syringe and pump it into the reactor:




I let the mixing pump run continuously. The food contains only very fine granules and it is very dilute so it doesn't cause any clogging of the pump... however I plan to clean out everything regularly.


I use a 50 ml/min dosing pump to feed the reactor tank water.


The reactor holds ~3 gal., so I set the pump to turn on for 10 min. every hour. This allows the volume of the reactor to be pumped out every 24 hrs, taking most of the food with it. Again, this is not 100% efficient and the reactor and its components must be cleaned regularly. I will say that the GEO kalk reactor is perfect for this. It has a drain at the bottom, and the pump is attached in a way that it is very easily removed for cleaning.


So far I am very happy with this method of feeding. It takes away another big chore, and allows me to feed a much larger variety of foods. I can even defrost some cyclopleeze and inject it into the reactor. I am hoping that between the syringe pump and kalk reactor I am able to provide my NPS corals the nutrition they need to thrive and grow!


uhuru is offline   Reply With Quote
Unread 12/19/2009, 05:08 PM   #2
rowjimmy
Registered Member
 
rowjimmy's Avatar
 
Join Date: Mar 2004
Location: New Jersey
Posts: 245
Excellent write up uhuru thanks for sharing that. I was always interested in trying these methods on my own system. Instead of feeding manually throughout the day all the time. It gets to be quite a chore.

What model syringe pump are you using if I may ask? Is the pump inside a small refridgerator?

If you had to choose between the two methods (if you couldn't use them both) which one would you say does a better job at feeding your system....the syringe pump or the kalk reactor doser? Thanks.


rowjimmy is offline   Reply With Quote
Unread 12/19/2009, 05:19 PM   #3
Haeun
Registered Member
 
Join Date: Apr 2007
Posts: 148
Does Roti-feast stay evenly suspended for you to use it with the syringe pump?
I've used other rotifer products and they've settle too fast for me to use it with the syringe pump.
I'm considering ditching the syringe pump entirely in favor of a kalk reactor.

Also, is your food list pretty much the same as Danny Dame's list, or have you added on/substituted other products?

Here's the list that I'm looking at
* Rotifers - not sure yet, maybe live culture?
Freeze-dried cyclopeeze
BSD's Algae Paste
DT’s oyster eggs
Reef Chili/Coral Frenzy
ZV Sponge Power
Brightwell MB7/Prodibio Biodigest
FM Ultra Clam
FM Ultra Sea Fan
FM Ultra MinF
FM MinD
FM MinS (Amino Acid)


Haeun is offline   Reply With Quote
Unread 12/19/2009, 11:23 PM   #4
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
Quote:
Originally Posted by rowjimmy View Post
Excellent write up uhuru thanks for sharing that. I was always interested in trying these methods on my own system. Instead of feeding manually throughout the day all the time. It gets to be quite a chore.

What model syringe pump are you using if I may ask? Is the pump inside a small refridgerator?

If you had to choose between the two methods (if you couldn't use them both) which one would you say does a better job at feeding your system....the syringe pump or the kalk reactor doser? Thanks.
rowjimmy,

I am using the base model syringe pump from syringepump.com. You can adjust the dosage on the fly, and it is a high quality unit. I like it a lot. It sits in a thermoelectric cooler, which takes the temp down to 45F, so not as cold as a fridge but since I change out the syringe every 12-24 hrs. no big deal. If I had more room I might go with a fridge, but it sits in my closet next to the tank.

It's too early to say which method is best. I have been using the syringe pump for several months now, but just started with the reactor. For sure, you have more options with the kalk reactor. The entire FM line, blended frozen foods, whatever! You can dose anything. However, it's also more work in terms of maintenance. With the syringe pump the only thing that gets dirty is the syringe! All I can say is between these two methods my corals look pretty damn happy. I'll snap some pics between now and Christmas or new years.


uhuru is offline   Reply With Quote
Unread 12/19/2009, 11:35 PM   #5
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
Quote:
Originally Posted by Haeun View Post
Does Roti-feast stay evenly suspended for you to use it with the syringe pump?
I've used other rotifer products and they've settle too fast for me to use it with the syringe pump.
I'm considering ditching the syringe pump entirely in favor of a kalk reactor.

Also, is your food list pretty much the same as Danny Dame's list, or have you added on/substituted other products?

Here's the list that I'm looking at
* Rotifers - not sure yet, maybe live culture?
Freeze-dried cyclopeeze
BSD's Algae Paste
DT’s oyster eggs
Reef Chili/Coral Frenzy
ZV Sponge Power
Brightwell MB7/Prodibio Biodigest
FM Ultra Clam
FM Ultra Sea Fan
FM Ultra MinF
FM MinD
FM MinS (Amino Acid)
Haeun,

I have not had a problem with Roti-feast. It is suspended in some type of gel. Maybe Gresham can chime in if he reads this. I have had problems with other liquid suspensions. Only Shellfish Diet, Roti-Feast seem to stay relatively consistent, at least long enough to dose a days worth of food.

I use everything in DD's recipe except algae paste, Ultra Min S, sponge power and DT's oyster eggs. Oyster Feast is a superior oyster product, but I don't add this to the mix, I still dose it manually before I feed the LPS corals and watch them go crazy. I also add frozen rotifers, squid & oyster juice, Rod's Food Coral Blend, Prodibio Reefbooster, Elos SVC Zooplankton.


uhuru is offline   Reply With Quote
Unread 12/20/2009, 02:32 PM   #6
GreshamH
Registered Member
 
Join Date: Nov 2002
Location: SF Bay Area, CA
Posts: 9,474
The Reef Nutrition products (most of them) have alginate in them which keeps them in suspension and acts as a minor carbon source (very minor as there is not much alginate in the media)


__________________
Gresham
_______________________________
Feeding your reef...one polyp at a time
GreshamH is offline   Reply With Quote
Unread 12/21/2009, 01:00 AM   #7
suta4242
Registered Member
 
Join Date: Jul 2007
Location: sydney, australia
Posts: 634
Thanks for tthe write up uhuru!

Just a quick question...

Quote:
As you can see the problem is that gravity makes the mixture separate. If you were to use a syringe pump for this, the dose rate would have to be pretty fast or you would get a very inconsistent mixture, especially if the syringe pump is pushing the food vertically upwards.
Why is this mixing critical - is it easier for the coral to feed when its all mixed? Not having a go, just trying to understand.


suta4242 is offline   Reply With Quote
Unread 12/21/2009, 01:21 AM   #8
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
If the mixture separates you might be feeding nothing but water in the beginning and then a very condensed mixture of food at the very end. This could equate to actual feeding time of only a small portion of the day. Also, there is more chance of clogging (one reason why peristaltic dosing pumps don't work for these mixtures).

The kalk reactor has been working VERY WELL. Maybe too well! I injected frozen cyclopleeze into it, and it makes its way into the tank no problem. I will have to dilute my mixture even more next time.



Last edited by uhuru; 12/21/2009 at 01:30 AM.
uhuru is offline   Reply With Quote
Unread 12/21/2009, 03:44 AM   #9
suta4242
Registered Member
 
Join Date: Jul 2007
Location: sydney, australia
Posts: 634
Thanks, makes perfect sense now!


suta4242 is offline   Reply With Quote
Unread 12/22/2009, 03:51 PM   #10
ari5736
Registered Member
 
Join Date: Jan 2007
Location: NJ
Posts: 447
This looks like a great idea. I am going to convert my phyto reactor (previously a sulphur reactor) to a dosing unit. Thanks for the write up.


ari5736 is offline   Reply With Quote
Unread 12/22/2009, 05:25 PM   #11
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
The first mixture I made was way too dense. You want the food in the reactor to be extremely dilute. And, you want to circulate water through your reactor as much as possible. A continuous duty peristaltic pump would actually be ideal here. Use a very dilute mixture and inject fresh food into the reactor every 12 hrs. This prevents food in the reactor from spoiling too much, and increases the amount of time you can go before you have to clean out the reactor.


uhuru is offline   Reply With Quote
Unread 12/22/2009, 05:54 PM   #12
rowjimmy
Registered Member
 
rowjimmy's Avatar
 
Join Date: Mar 2004
Location: New Jersey
Posts: 245
Quote:
Originally Posted by uhuru View Post
rowjimmy,

I am using the base model syringe pump from syringepump.com. You can adjust the dosage on the fly, and it is a high quality unit. I like it a lot. It sits in a thermoelectric cooler, which takes the temp down to 45F, so not as cold as a fridge but since I change out the syringe every 12-24 hrs. no big deal. If I had more room I might go with a fridge, but it sits in my closet next to the tank.

It's too early to say which method is best. I have been using the syringe pump for several months now, but just started with the reactor. For sure, you have more options with the kalk reactor. The entire FM line, blended frozen foods, whatever! You can dose anything. However, it's also more work in terms of maintenance. With the syringe pump the only thing that gets dirty is the syringe! All I can say is between these two methods my corals look pretty damn happy. I'll snap some pics between now and Christmas or new years.
Thanks for the info uhuru...please keep us posted on your progress. I look forward to seeing your pictures!


rowjimmy is offline   Reply With Quote
Unread 12/22/2009, 11:13 PM   #13
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
Will do! I think figuring out the correct amount of food to dose with the kalk reactor is the key now. Here is a pic I just took of my dendro:




uhuru is offline   Reply With Quote
Unread 12/23/2009, 08:04 AM   #14
stunreefer
Reef Hugger
 
stunreefer's Avatar
 
Join Date: Jul 2007
Location: Submerged
Posts: 3,253
Hot Damn!

Looks great man I'm diggin' the new avatar too


__________________
-Austin

Make your animals Thrive, not just Survive.
stunreefer is offline   Reply With Quote
Unread 12/23/2009, 09:05 AM   #15
ari5736
Registered Member
 
Join Date: Jan 2007
Location: NJ
Posts: 447
Question, is the feed to the reactor coming from the tank. I was thinking that maybe you have it hooked up to a topoff device if your tank is large enough with alot of evaporation.

I am going to set up a reactor like yours this week and use the food and proportion that Chuck Stottlemire used. Because it was a sulphur reactor it actually has an extra valve on top (for air release) where I can inject the food.

What tempertaure do you keep your tank at Uhuru?


ari5736 is offline   Reply With Quote
Unread 12/23/2009, 11:09 AM   #16
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
Thanks Austin! I thought you would like the avatar.

ari - yes, the feed is coming from the tank (sump). I don't see any reason to use it with an ATO, this would be less consistent than if you just used a timer or let it run continuously. If you just want to dose Shellfish Diet or Roti-Feast I think the syringe pump works best.

I run my tank between 72-74F.


uhuru is offline   Reply With Quote
Unread 12/23/2009, 11:17 AM   #17
driftin
Registered Member
 
driftin's Avatar
 
Join Date: Jul 2004
Location: Chicago
Posts: 1,247
Do you have any problems with food spoilage?


__________________
-Jim

Current Tank Info: 70 gal custom room divider
driftin is offline   Reply With Quote
Unread 12/23/2009, 11:29 AM   #18
ari5736
Registered Member
 
Join Date: Jan 2007
Location: NJ
Posts: 447
Quote:
Originally Posted by uhuru View Post
Thanks Austin! I thought you would like the avatar.

ari - yes, the feed is coming from the tank (sump). I don't see any reason to use it with an ATO, this would be less consistent than if you just used a timer or let it run continuously. If you just want to dose Shellfish Diet or Roti-Feast I think the syringe pump works best.

I run my tank between 72-74F.

What makes kalk reactor better for other types of food (cyclops, etc)?


ari5736 is offline   Reply With Quote
Unread 12/23/2009, 06:19 PM   #19
rowjimmy
Registered Member
 
rowjimmy's Avatar
 
Join Date: Mar 2004
Location: New Jersey
Posts: 245
Quote:
Originally Posted by uhuru View Post
Will do! I think figuring out the correct amount of food to dose with the kalk reactor is the key now. Here is a pic I just took of my dendro:

That "Monster in the Dark" is quite a beauty! Awesome pic uhuru...keep up the good work!


rowjimmy is offline   Reply With Quote
Unread 12/24/2009, 12:31 AM   #20
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
Quote:
Originally Posted by driftin View Post
Do you have any problems with food spoilage?
The first try I did because I injected too much food into the reactor and it took too long to clear it out. I don't think the corals mind some food spoilage actually, but it was too stinky for me.

The next time I diluted the mixture much more and got this:


24 hrs later it pretty much emptied the food out:



uhuru is offline   Reply With Quote
Unread 12/24/2009, 12:40 AM   #21
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
Quote:
Originally Posted by ari5736 View Post
What makes kalk reactor better for other types of food (cyclops, etc)?
because you have a mixing pump that keeps everything suspended in the water... if you ever tried to mix together the FM dendro line products you'll see a definite separation if you just let it sit for a while.


uhuru is offline   Reply With Quote
Unread 12/26/2009, 07:03 PM   #22
debatecoach
Registered Member
 
debatecoach's Avatar
 
Join Date: Dec 2009
Location: Steamboat Springs CO
Posts: 24
uhuru:
Just tagging along. Thanks for the great information. Do you have any other links/articles on NPS corals/tanks? I've been out of reefkeeping for a couple of years (college was a disaster for this hobby), but I'm planning a comeback after I complete an internship in March. I wanted to do something unique (essentially avoid sps). Your nano-tank is an inspiration!


debatecoach is offline   Reply With Quote
Unread 12/27/2009, 05:38 PM   #23
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
I'm glad I can inspire you on your return to the hobby! A good starting point is here:

http://reefkeeping.com/issues/2008-02/feature/index.php


uhuru is offline   Reply With Quote
Unread 12/27/2009, 07:19 PM   #24
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
I am planning for this next food batch to use only:

FM Ultra Clam
FM Ultra Seafan
FM Ultra Min F
FM Ultra Life
FM Ultra Min D
FM Ultra Pac
Prodibio Reefbooster

I want to see if I can go longer before having to clean out the reactor. Right now I can only go about 1 wk before it starts to smell really bad. It only takes about 5 min. to clean but I'm more concerned with dosing too much rotten food into the tank.


uhuru is offline   Reply With Quote
Unread 12/27/2009, 07:34 PM   #25
uhuru
Registered Member
 
uhuru's Avatar
 
Join Date: Mar 2007
Location: Columbus
Posts: 2,949
The reactor after 1 wk:



uhuru is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 11:48 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.