|
03/05/2010, 08:29 PM | #1 |
Registered Member
Join Date: Mar 2009
Location: Columbus,Ohio
Posts: 313
|
Lumatek dimmable ballast help
Do the new lumatek dimmable ballasts plug and play with lumen bright minis or is there rewiring needed?
__________________
Joe :) |
03/05/2010, 08:36 PM | #2 |
Registered Member
Join Date: Jul 2008
Location: Edmonton Alberta
Posts: 4,717
|
Does your lumenbrite pendand already have a cord wired to it? If not then you will have to connect it up anyways. The ballast comes with the cord to wire it to the reflector.
__________________
----------------- Current Tanks: New 210 custom 84 x 24 x 24, 60g sump, SWC 250 extreme with bubble blaster 5000, 2 vortech mp40, 2 vortech mp10, 12 T5, Water blaster 5000, warner marine bio pellets, 60g clownfish cube, red carpet anemone with a 25g sump,SRO octopus 1000sss, 250w radium, lumenarc large. |
03/05/2010, 08:51 PM | #3 |
Moved On
Join Date: Nov 2009
Location: IN
Posts: 1,037
|
I just cut the female connector off the ballast, spliced the wires, connected color to color. Took a wiring nut for the red and black wires, then I used a ring terminal for the ground green wire. I was kind of worried at first, but it was really easy.
|
03/05/2010, 09:14 PM | #4 |
saiperchémibatteilcorazon
Join Date: Sep 2005
Location: Clearwater, FL
Posts: 4,027
|
You can also replace the cord on your reflectors with a cord that has the sls male connector, they are only $11 and it looks cleaner than cutting wires.
|
03/05/2010, 09:20 PM | #5 |
Registered Member
Join Date: Mar 2009
Location: Columbus,Ohio
Posts: 313
|
Where would i pickup a sls male connector?
__________________
Joe :) |
03/05/2010, 10:23 PM | #6 |
Premium Member
Join Date: Feb 2007
Location: Downey,CA
Posts: 1,782
|
Marine Depot carries them.
__________________
Andy SCRK Member Current Tank Info: Barebottom, 65 Bow-Front, 20 gal sump/fuge, octo extreme 160, (2) Lumen Max3 250W w/ XM 20k's, 2 VHO Actinic and (1) VorTech MP40w & (1) VorTech MP10 |
|
|