|
10/24/2020, 07:27 PM | #1 |
Registered Member
Join Date: Oct 2020
Posts: 10
|
Hi! New here not new to hobby. Need advice on a potential issue
Hi folks!
Been in the hobby for a while now but this is new to me and hoping for advice. I got a good deal on an aquarium today 60X18X24 112 gallons I believe. The tank has a trim around the top and I can tell it never had centre braces installed. No cut marks etc. The trim is glued on albeit barely and seems to be just for aesthetic purposes. Am I wrong in assuming that? The reason for my concern is the corners aren’t fused together. Now wether they cracked or just designed that way I’m not entirely sure, however, the tops of the corners (if that makes any sense) seem to have never been a solid piece. The side piece seem to be independent of the long pieces. It’s an older tank made by Hagen and the glass from what I’ve measured is 1/2 thick just a hair under. Can I fill this thing up and transfer my Amazon tank over! Or should I began the process of a DIY solution or erurobrace? Thanks for reading and have a wonderful safe weekend. Sent from my iPhone using Tapatalk |
10/24/2020, 07:49 PM | #2 |
Registered Member
Join Date: Mar 2016
Posts: 689
|
Can you post pics
Sent from my SM-N960U using Tapatalk |
10/24/2020, 08:07 PM | #3 |
Registered Member
Join Date: Oct 2020
Posts: 10
|
|
10/25/2020, 03:44 AM | #4 |
Registered Member
Join Date: Oct 2020
Posts: 10
|
These are the pics he has sent me if this helps
Sent from my iPhone using Tapatalk |
10/25/2020, 06:32 AM | #5 |
Registered Member
Join Date: Jul 2010
Location: Austin, TX
Posts: 1,985
|
With many manufactured aquariums the trim is primarily cosmetic. As long as the tank is evenly supported evenly if the trim joints at the corners have seperated slightly it shouldn't be an issue. If you want to add a support, siliconing in a piece of glass is easily done.
__________________
"Our crystal clear aquaria come nowhere close to the nutrient loads that swirl around natural reefs" Charles Delbeek |
10/25/2020, 06:50 AM | #6 | |
Registered Member
Join Date: Oct 2020
Posts: 10
|
Quote:
I took some more pics. The plastic trim on my 75 gallon is very thick and appears to be one piece. This trim is paper think and it doesn’t appear to have been one piece.... Sent from my iPhone using Tapatalk |
|
10/25/2020, 07:10 AM | #7 |
Registered Member
Join Date: Jul 2010
Location: Austin, TX
Posts: 1,985
|
Those are obvioulsy mitered corners, besides cosmetic it has a lip for holding glass covers. It's just siliconed in place and likely has pulled loose from the silicone in places.
__________________
"Our crystal clear aquaria come nowhere close to the nutrient loads that swirl around natural reefs" Charles Delbeek |
10/25/2020, 07:19 AM | #8 |
Registered Member
Join Date: Dec 2005
Location: Pingree Grove, IL
Posts: 952
|
One thing to note is that used to be a dry tank. You can see the stick on heating pad for reptiles. I would be concerned with ammonia that has absorbed into the silicone and that its water tight at all from whatever they had in there scratching or clawing at.
I don't remember Hagen making aquariums however it's also not something I paid too much attention to though. Sent from my SM-G955U using Tapatalk
__________________
"Friendship is like peeing on yourself: everyone can see it, but only you get the warm feeling it brings" Current Tank Info: 67 Long |
10/25/2020, 07:31 AM | #9 | |
Registered Member
Join Date: Oct 2020
Posts: 10
|
Quote:
Yeah it was a snake tank. So the ammonia is more of a solid. Snakes don’t pee like normal lol. The silicone appears to be in great shape tho! I put the stand in my garage and levelled it. I’ll fill it up today and wait a couple weeks and see what happens. I’ll tKe measurements all around and see if it’s bulging Sent from my iPhone using Tapatalk |
|
10/25/2020, 10:28 AM | #10 |
Registered Member
Join Date: Oct 2020
Posts: 10
|
Here more pics.
Filled it up in my garage. It’s got a very slight bulge on front and back. Hard to tell from pics but here it is I used the brace as a flat edge. Prob not the best but you can see the gap in the middle. Is that of concern? Sent from my iPhone using Tapatalk |
10/25/2020, 11:33 AM | #11 |
Premium Member
Join Date: Aug 2000
Location: Visalia, CA
Posts: 1,350
|
Hagan makes retile tanks like the Exo Tera. My concern would be is it designed to handle the weight and outward force of water in an aquarium? Same glass thickness? You could contact Hagan.
Sent from my SM-N986U using Tapatalk |
10/25/2020, 12:17 PM | #12 |
RC Mod
|
5/8ths inch glass is pretty bombproof. I'd repair the trim. Install an ammonia alert badge, for one. Leaching can cause a slow buildup over time. But glass looks solid.
__________________
Sk8r Salinity 1.024-6; alkalinity 8.3-9.3 on KH scale; calcium 420; magnesium 1300, temp 78-80, nitrate .2. Ammonia 0. No filters: lps tank. Alk and cal won't rise if mg is low. Current Tank Info: 105g AquaVim wedge, yellow tang, sailfin blenny,royal gramma, ocellaris clown pair, yellow watchman, 100 microceriths, 25 tiny hermits, a 4" conch, 1" nassarius, recovering from 2 year hiatus with daily water change of 10%. |
|
|