Aga Megaflow

moo0o · 09/03/2007, 09:03 PM

recently bought a 90g AGA and i was wondering how the megaflow worked. As in..how to get it started and all that.

jer77 · 09/03/2007, 10:31 PM

It comes with the durso standpipe right and the return piping with the lock-line. So put the standpipe in the larger hole and adjust its height so the top of it is just below the teeth in the overflow. Then put the return tubing in the smaller hole and screw in the lock-line.

moo0o · 09/03/2007, 10:35 PM

i got all that done, i was wondering like...how it works, it is a siphon?

rcerulli · 09/03/2007, 10:54 PM

i just bought a 72AGA megaflow, setting it up this week, but yea its a siphon, i bought a rio 2500 for the return (rated 600-700gph @ 3 feet)

moo0o · 09/03/2007, 10:56 PM

cool, how do you start it? ahha

rcerulli · 09/03/2007, 11:17 PM

Quote:

Originally posted by moo0o
cool, how do you start it? ahha

thats a good question as this is my first drilled setup, but im going to assume gravity

moo0o · 09/03/2007, 11:29 PM

hahaha ok, i really hope thats how it works haha

techreef · 09/04/2007, 11:06 AM

before you wet-test it, make sure (SURE) that your tubes have anti-syphon holes drilled in them. I have a 90G AGA tank too, and my overflow kit pieces came with the holes already. You didn't say if this was an older used kit or a new one, so better safe than sorry.

Anyway, once you fill the tank up w/ enough water to flow over that little wall on the inside of the overflow's black outer wall, the overflow will begin to fill up w/ water. once the overflow is full of water, the water will flow down your intake tube (the height-adjustable tube w/ the hole on the top) and flow through your plumbing. It's self starting, so you won't need to worry about restarting it if you turn your return pump off while feeding your tank, etc. The overflow will restart itself once the water level in your display tank returns to a high enough level.

One more point: your brand new, clean overflow may sound a bit noisy for the first week or three. (water flowing down the pipes) give it a couple weeks to begin to slime up w/ algae on the inside of the pipes before you go crazy trying to quiet things down. Once some algae coats the inside of your plumbing, things tend to quiet down.

Have fun!

09/03/2007, 09:03 PM	#1
moo0o Premium Member Join Date: Feb 2007 Location: SJ,CA Posts: 1,694	Aga Megaflow recently bought a 90g AGA and i was wondering how the megaflow worked. As in..how to get it started and all that.

09/03/2007, 10:31 PM	#2
jer77 Phish Lover Join Date: Dec 2004 Location: Pittsburgh, PA Posts: 2,642	It comes with the durso standpipe right and the return piping with the lock-line. So put the standpipe in the larger hole and adjust its height so the top of it is just below the teeth in the overflow. Then put the return tubing in the smaller hole and screw in the lock-line. __________________ - Jonny -, 120g 5 Year Old Reef w/ SPS, BTA, Zoos & some Softies. 40g Frag Tank. 40g Sump. Super Reef Octopus XP 3000 External Cone Skimmer. 250W Radiums. TaoTronics LED. PanWorld 200PS w/SQWD

09/03/2007, 10:35 PM	#3
moo0o Premium Member Join Date: Feb 2007 Location: SJ,CA Posts: 1,694	i got all that done, i was wondering like...how it works, it is a siphon?

09/03/2007, 10:54 PM	#4
rcerulli Registered Member Join Date: Jun 2007 Location: Long Island, NY Posts: 246	i just bought a 72AGA megaflow, setting it up this week, but yea its a siphon, i bought a rio 2500 for the return (rated 600-700gph @ 3 feet)

09/03/2007, 10:56 PM	#5
moo0o Premium Member Join Date: Feb 2007 Location: SJ,CA Posts: 1,694	cool, how do you start it? ahha

09/03/2007, 11:29 PM	#7
moo0o Premium Member Join Date: Feb 2007 Location: SJ,CA Posts: 1,694	hahaha ok, i really hope thats how it works haha

09/04/2007, 11:06 AM	#8
techreef Registered Member Join Date: Sep 2005 Location: Montclair, NJ Posts: 1,046	before you wet-test it, make sure (SURE) that your tubes have anti-syphon holes drilled in them. I have a 90G AGA tank too, and my overflow kit pieces came with the holes already. You didn't say if this was an older used kit or a new one, so better safe than sorry. Anyway, once you fill the tank up w/ enough water to flow over that little wall on the inside of the overflow's black outer wall, the overflow will begin to fill up w/ water. once the overflow is full of water, the water will flow down your intake tube (the height-adjustable tube w/ the hole on the top) and flow through your plumbing. It's self starting, so you won't need to worry about restarting it if you turn your return pump off while feeding your tank, etc. The overflow will restart itself once the water level in your display tank returns to a high enough level. One more point: your brand new, clean overflow may sound a bit noisy for the first week or three. (water flowing down the pipes) give it a couple weeks to begin to slime up w/ algae on the inside of the pipes before you go crazy trying to quiet things down. Once some algae coats the inside of your plumbing, things tend to quiet down. Have fun!