![]() |
![]() |
![]() |
#1 |
Registered Member
Join Date: Mar 2006
Location: Canada
Posts: 2,963
|
70W MH - what should be the distance from water?
70W MH - what should be the distance from water?
Safe and efficient, I mean. So far it is in slightly less, than 5" (11 cm) from the water, and 5.5" (13.5 cm) from the topmost coral, porites. Had read, that others have such light at 7" (17.5 cm), is mine too close? Thanks. |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Apr 2004
Location: Rockford, Illinois
Posts: 6,596
|
You would want the lights no less than 6 and no higher than 12 inches from the waters surface.
|
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Dec 2003
Location: Dunwoody, GA USA
Posts: 262
|
I've got a 12 gallon nano with 70w MH inside the canopy. That puts it about 4" from the water level.
No issues other than the obvious ones around heat. |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Dec 2006
Location: Kingston, Ontario
Posts: 2,049
|
It may seem like a total newbie thing to say, however I've never really understood why lights need to be a certain distance off of the water.
I can see these reasons... -high enough that they won't be splashed with SW -high enough that radiant heat from the fixture is not transferred (as much) to the water surface -Better spread of light across your tank Other than that...? The amount of light reaching the surface of the water will not vary much whether the lamp is 6 or 12 inches from the water. Certainly some is lost by scattering/absorbtion in the air, yet I believe this is minimal in less than 12" of air. Even light like UV shouldn't decrease much over that distance.. am I way off base here? Is the only reason that you will have a better spread of light, and thus less intense W/m^2 at any given spot on the water? Will 70W of MH really exceed wha the corals can take, even if the lamp is 0.5" away from them?
__________________
Still fighting entropy. |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Apr 2006
Location: Boston
Posts: 66
|
I have my 2 x 150 watt MH's about 3" above the water with 2 x 70 cfm fans cooling them and the water. My lights are on for about 6 hours a day with no temp movement.
|
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: May 2005
Location: Toledo, Ohio USA
Posts: 2,051
|
High enough so they stay dry is the most important--
I'd target at least 6" off the water, 8" or more would be better. Mine are about 10" off the water.
__________________
"I only have time to neglect one tank"-- Me "I don't want to achieve immortality through my work, I want to achieve immortality by not dying"-- Woody Allen Current Tank Info: 125G mixed reef with 135G Sump |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Sep 2006
Location: Minnesota
Posts: 1,517
|
The Aquapod with 70 watt halide is maybe four inches off the water, no heat issues here.
__________________
Most people don't realize that large pieces of coral, which have been painted brown and attached to the skull by common wood screws, can make a child look like a deer. *Jack Handey |
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Mar 2006
Location: Canada
Posts: 2,963
|
Thank you, most helpful!
As I understand, no significant UV danger even at my lamp height. Will place it slightly higher, at 6", just in case. |
![]() |
![]() |
![]() |
|
|