Question

tgriffin · 03/17/2008, 07:19 PM

Hey guys,

I am looking at buying a 90 gal. acrylic corner tank. The tank has everything buit into it and is in great shape. It does however have some scratches in it. My friend says I can buy a kit to remove the scratches. Anyone have any recomendations on which kit would do the best and about how well it removes the scratches?

Thanks

tgriffin

bertoni · 03/17/2008, 07:45 PM

I refinished a 75g acrylic tank. The process might have required 10-20 hours or so. You'd need a sanding block (sponge) and a lot of Micro-Mesh, which I would buy in bulk, as well as the Novus polish. I started at 600 # and worked up to 20,000 #.

03/17/2008, 07:19 PM	#1
tgriffin Registered Member Join Date: Dec 2007 Location: Cumming, GA Posts: 357	Question Hey guys, I am looking at buying a 90 gal. acrylic corner tank. The tank has everything buit into it and is in great shape. It does however have some scratches in it. My friend says I can buy a kit to remove the scratches. Anyone have any recomendations on which kit would do the best and about how well it removes the scratches? Thanks tgriffin

03/17/2008, 07:45 PM	#2
bertoni RC Mod Join Date: Mar 2002 Location: Mountain View, CA, USA Posts: 88,616	I refinished a 75g acrylic tank. The process might have required 10-20 hours or so. You'd need a sanding block (sponge) and a lot of Micro-Mesh, which I would buy in bulk, as well as the Novus polish. I started at 600 # and worked up to 20,000 #. __________________ Jonathan Bertoni