Toilet, Toilet, Toilet

bkvreef · 07/03/2008, 08:43 AM

That's my new set up overflow boxes sound like!

I had a 110g with the two boxes and used flexible hose (like form hot tub). and the gurgle buster.

However, I since upgraded to a 220g and I plumbed it with pvc.

It sounds like 10 toilets flushing NONSTOP.

I looked at Herbies suggestion (basically let the water in the pvc backfill so that the water drain doesn't drop so far.

Any other ideas!!???

Jerry Hallums · 07/03/2008, 05:10 PM

I had a lot of noise on my 150---and where the bulkheads are, I put a Tee to allow air in the system at that point. It really helped the noise.

Playa-1 · 07/03/2008, 06:40 PM

How much flow do you have going thru the sump?
Is the sump in a basement, under the cabinet or somewhere else?

snorvich · 07/03/2008, 07:12 PM

You might google Durso and Stockman standpipes.

Gtstricky · 07/03/2008, 09:03 PM

There might be some ideas on this page: http://www.dursostandpipes.com/FAQ/t...5/Default.aspx

07/03/2008, 08:43 AM	#1
bkvreef Registered Member Join Date: Jan 2008 Location: Dayton, Ohio Posts: 439	Toilet, Toilet, Toilet That's my new set up overflow boxes sound like! I had a 110g with the two boxes and used flexible hose (like form hot tub). and the gurgle buster. However, I since upgraded to a 220g and I plumbed it with pvc. It sounds like 10 toilets flushing NONSTOP. I looked at Herbies suggestion (basically let the water in the pvc backfill so that the water drain doesn't drop so far. Any other ideas!!???

07/03/2008, 07:12 PM	#4
snorvich Team RC member Join Date: Aug 2005 Location: Outlander Posts: 40,953 Blog Entries: 46	You might google Durso and Stockman standpipes. __________________ Warmest regards, ~Steve~

07/03/2008, 05:10 PM	#2
Jerry Hallums Registered Member Join Date: Apr 2008 Location: Sour Lake, Texas Posts: 20	I had a lot of noise on my 150---and where the bulkheads are, I put a Tee to allow air in the system at that point. It really helped the noise.

07/03/2008, 06:40 PM	#3
Playa-1 Moved On Join Date: Jun 2007 Location: Laguna Niguel, CA Posts: 7,497	How much flow do you have going thru the sump? Is the sump in a basement, under the cabinet or somewhere else?

07/03/2008, 09:03 PM	#5
Gtstricky Registered Member Join Date: Mar 2008 Location: Kennett Sq, PA Posts: 496	There might be some ideas on this page: http://www.dursostandpipes.com/FAQ/t...5/Default.aspx