|
|
|
08/23/2009, 08:10 PM
|
#1 |
|
Premium Member
 
Join Date: Feb 2009
Location: Hummelstown, PA
Posts: 2,353
|
Tank Chemistry
Ok... So I was running a GEO calcium reactor just to keep my calcium level at a good stable level. But in messing with the settings with my old Milwaukee CO2 regulator, I was killing my pH. I started running a kalk reactor to keep my pH level. The only thing that was testing real low was my mag. So I started supplementing mag. When I finally got my mag back to where it should be, I tested everything. And... Everything was very very high. I have not dosed anything since 8/5. The only numbers that has dropped is my alk and pH. I am not sure if I should be doing anything else or just let things go for a bit.
8/5/09 8.4 pH 560 Calc 15.2 dkh 1400 mag 8/12/09 8.2 pH 540 Calc 13.2 dkh 1400 mag 8/23/09 8.1 pH 540 Calc 10.2 dkh 1400 mag |
|
|
|
08/24/2009, 11:15 PM
|
#2 |
|
Registered Member
Join Date: Feb 2009
Posts: 21
|
8/23/09
8.1 pH 540 Calc 10.2 dkh 1400 mag i think these numbers are ideal! if you can keep this going you will have a happy tank and tank mates! good luck. 
|
|
|
|
 |
|
|
