Instructions: Odyssea T5 Digital Timer

[gemmasicolo]

Since the unit doesn't come with instructions I thought I'd post them here for future reference. I know many people, just like me, needed them after they purchased the unit. Hope it will help! These instructions come directly from aquatraders.com

Odyssea Digital Timer Instructions

First, you need to set up the clock, by hitting “MIN” and “HOUR”.

Then, hit the "HQI" or "Act. Blue" or "LED" to set up the three sections individually.

After you have the clock set, All sections should be at "OFF" position as indicated by the arrow underneath the time shown.*

Then, hit the section you need to set up, for example "HQI", twice, then arrow will point at "AUTO"
Hit "Prog", You'll see "On" shown on the left*of the time in the*display
Set the "Min" and "Hour" you want the set up to be turned on
Hit "Prog" again.*

To set the time off, hit the same section, for example "HQI" three times, the arrow below the time will now point at "Auto" again
Hit "Prog"
Hit the "HQI" button again until you see "Off" shown on the left of the time in the display
Set the "Min" and "Hour" you want the set up to be turned off
Hit "Prog".


Hit the next section you need to set up, for example "Act. Blue", twice, then arrow will point at "AUTO"
Hit "Prog", You'll see "On" shown on the left*of the time in the*display
Set the "Min" and "Hour" you want the set up to be turned on
Hit "Prog" again.*

To set the time off, hit the same section, for example "Act. Blue" three times, the arrow below the time will now point at "Auto" again
Hit "Prog"
Hit the "Act. Blue" button again until you see "Off" shown on the left of the time in the display
Set the "Min" and "Hour" you want the set up to be turned off
Hit "Prog".


Lastly, hit the final section you need to set up, for example "LED", twice, then arrow will point at "AUTO"
Hit "Prog", You'll see "On" shown on the left*of the time in the*display
Set the "Min" and "Hour" you want the set up to be turned on
Hit "Prog" again.*

To set the time off, hit the same section, for example "LED" three times, the arrow below the time will now point at "Auto" again
Hit "Prog"
Hit the "LED" button again until you see "Off" shown on the left of the time in the display
Set the "Min" and "Hour" you want the set up to be turned off
Hit "Prog".

[NaCL H2O StL]

After putting this on the shelf for 5 years, I have decided to use it again on a new build.
Thank you for providing instructions.
Jim