My Nano Edge 6G Build

Xtr3m3X · 01/17/2012, 09:15 PM

Hi all!

My name is Ciprian and I am fairly new to the forum and to the hobby.
I thought I would make my first post worthy by posting a few pictures of my new Fluval Edge with which I fell in love and which also happens to be my first SW tank.

I have been closely following Lavish62's thread on here, and decided to start my own similar thread with my own changes to the project.
Below are a few pictures which I have taken since I got my Edge (mid-December) and a few which I have taken since the tank is cycling (beginning of January).

My current setup is the original HOB filter and media which were boxed with the aquarium, Vortech MP-10 and the Fluval 25w heater.

I am using CaribSea live sand and Fiji Dry Eco Live Rock from BRS.

The two halogen MR11 bulbs obviously had to go and have been replaced by two 240 lumen MR16 LEDs from LEDwholesalers. I have also retrofitted two 13w Coralife bulbs next to the LEDs wired up to individual light switches.

I apologize in advance for any "crappy-er" pictures since most of them are taken with my iPhone 4S.

Welcome to my thread and all comments/suggestions will be appreciated and taken into consideration.

Unboxing and setup pictures:

Original MR11 bulbs with lights off in the house; crappy light and spread.

I decided to add another MR11/16 socket in the middle between the two original ones in case I want to add a blue LED bulb for my night light.

After adding the sand, rock and water...

Setup on my nightstand.

Still a little cloudy.

Xtr3m3X · 01/17/2012, 09:16 PM

Coralife 13w lights on only.

Starting to cycle... Picture as of 1/16/12. - PH 8.0; Ammonia 0; Nitrite 0; Nitrate 20ppm.

1/16/12.

1/17/12.

That's all for now...

MattFrancis · 01/18/2012, 09:53 AM

It looks really nice, make sure to keep up on the top off, mine is terrible. What type of carribsea sand did you use?

Sean_South · 01/18/2012, 11:11 AM

whats your stocking plans?

Xtr3m3X · 01/18/2012, 07:39 PM

Quote:

Originally Posted by MattFrancis

It looks really nice, make sure to keep up on the top off, mine is terrible. What type of carribsea sand did you use?

It seems it needs to be topped off every 3 days or so when the Coralife bulbs are on. They emit more heat and hence the evaporation. With the LED's on only, it's not so bad. I used the Special Grade Reef Sand - http://www.caribsea.com/pages/products/aragalive.html. I wanted to make sure the MP10 wouldn't blow it all over.

Quote:

Originally Posted by Sean_South

whats your stocking plans?

I am not decided yet - I am thinking a clown and a firefish. As far as corals go, I am undecided as of now. Suggestions?

I am also thinking of adding the clean up crew in there very soon. It seems my levels are stable.

thebanker · 05/29/2012, 06:05 PM

Any updates? Love the way this started. Kinda funny that you put the water in it while it was on the floor too!

Also, I tagged it so you can join in the Fluval Edge club!

Chaotic Reefer4u · 05/29/2012, 11:38 PM

Very nice fluval edge.

01/17/2012, 09:15 PM	#1
Xtr3m3X Registered Member Join Date: Dec 2011 Location: Cleveland, OH Posts: 8	My Nano Edge 6G Build Hi all! My name is Ciprian and I am fairly new to the forum and to the hobby. I thought I would make my first post worthy by posting a few pictures of my new Fluval Edge with which I fell in love and which also happens to be my first SW tank. I have been closely following Lavish62's thread on here, and decided to start my own similar thread with my own changes to the project. Below are a few pictures which I have taken since I got my Edge (mid-December) and a few which I have taken since the tank is cycling (beginning of January). My current setup is the original HOB filter and media which were boxed with the aquarium, Vortech MP-10 and the Fluval 25w heater. I am using CaribSea live sand and Fiji Dry Eco Live Rock from BRS. The two halogen MR11 bulbs obviously had to go and have been replaced by two 240 lumen MR16 LEDs from LEDwholesalers. I have also retrofitted two 13w Coralife bulbs next to the LEDs wired up to individual light switches. I apologize in advance for any "crappy-er" pictures since most of them are taken with my iPhone 4S. Welcome to my thread and all comments/suggestions will be appreciated and taken into consideration. Unboxing and setup pictures: Original MR11 bulbs with lights off in the house; crappy light and spread. I decided to add another MR11/16 socket in the middle between the two original ones in case I want to add a blue LED bulb for my night light. After adding the sand, rock and water... Setup on my nightstand. Still a little cloudy.

05/29/2012, 11:38 PM	#7
Chaotic Reefer4u ♥Acropora Aficionado♥ Join Date: Jul 2004 Location: Hollister,Ca. Posts: 5,163	Very nice fluval edge. __________________ Live everyday as if it was your last, take time to smell the flowers, enjoy all things living, never take anything for granted, you just never know when your number might be up... Current Tank Info: * 90g. Reef Ready TruVu tank with 30g. Platinum Filtration Series Sump SpS Acro enthusiast *

01/17/2012, 09:16 PM	#2
Xtr3m3X Registered Member Join Date: Dec 2011 Location: Cleveland, OH Posts: 8	Coralife 13w lights on only. Starting to cycle... Picture as of 1/16/12. - PH 8.0; Ammonia 0; Nitrite 0; Nitrate 20ppm. 1/16/12. 1/17/12. That's all for now...

01/18/2012, 09:53 AM	#3
MattFrancis Registered Member Join Date: Apr 2010 Location: Orlando, FL Posts: 144	It looks really nice, make sure to keep up on the top off, mine is terrible. What type of carribsea sand did you use?

01/18/2012, 11:11 AM	#4
Sean_South Registered Member Join Date: Feb 2011 Location: Long Island, NY Posts: 130	whats your stocking plans?

05/29/2012, 06:05 PM	#6
thebanker Moved On Join Date: Jul 2009 Location: Socal Posts: 2,315	Any updates? Love the way this started. Kinda funny that you put the water in it while it was on the floor too! Also, I tagged it so you can join in the Fluval Edge club!