![]() |
![]() |
![]() |
#1 |
Registered Member
Join Date: Nov 2012
Posts: 594
|
Good Idea: yay or nay?
As i have been doing some research I have realized i am probably lacking a lot of things my corals/reef need, so i am thinking about these products after doing some research:
Seachem Fusion two part Ca and Carbonate Seachem Reef Buffer Lugol's Coral Dip Seachem Reef Magnesium Seachem Reef Trace Seachem Reef Plus Do i need others? Should I not use these? Thanks for the help, Jacob |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Jan 2012
Location: Lancaster,PA
Posts: 1,720
|
Don't add things based on research and suggestion, add based on proof. Unless you test for it and know you are deficient, don't add it.
|
![]() |
![]() |
![]() |
#3 | |
Registered Member
Join Date: Nov 2012
Posts: 594
|
Quote:
__________________
SPS = STABILITY PROMOTES SUCCESS :D GO VOLS!!! CURRENT TANK: 35 gallon cube w/ 10 gallon sump. Mixed/SPS dominant Current Tank Info: 35 Gallon Cube w/ 10 gallon sump |
|
![]() |
![]() |
![]() |
#4 | |
Registered Member
Join Date: Jan 2012
Location: Lancaster,PA
Posts: 1,720
|
Quote:
A PH of 7.8-8.4 is fine as long as it's stable. Lower than 7.8 would cause concern, as would large swings. If you're having problems, it's best to step back, analyze the situation, decide on the best course of action, then act. Making too make changes too quick is a recipe for disaster. |
|
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Nov 2006
Location: Smyrna, Delaware
Posts: 3,767
|
Give us some information on your system. Size, what you're keeping, etc. What are you using to test your Salinity with? I would suggest you use a decent refractometer calibrated using calibration fluid. What are you using to measure your Ca, Mg and Alk with? Good test kits for these three would be: Salifert, Elos, Red Sea Pro. I've been using the new Red Sea Pro, and find it accurate and affordable.
If your bio load is small enough you may not need to do any dosing, if your doing periodic WC's with the proper salinity. |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Mar 2011
Location: New Jersey
Posts: 2,753
|
also if you do end up needing to dose cal/alk/mag try BRS. it's way cheaper.
|
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Oct 2009
Location: SoCal
Posts: 1,597
|
Make sure you have the test kits.
__________________
-Matt in between tanks |
![]() |
![]() |
![]() |
#8 |
RC Mod
![]() Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
The 2-part should be okay to use. The coral dip can be useful when purchasing new corals, and I used that product myself.
The other products aren't as useful, IMO. The Reef Buffer is going to about the same thing as the alkalinity solution of the 2-part. They are both high-pH alkalinity supplements. The magnesium supplement is mostly epsom salts, but higher in price. I would go with a DIY supplement or another commercial supplement that has mostly magnesium chloride in it. The trace element supplements are likewise suspect. Our tanks get trace elements from the salt and from food, so I'd skip those.
__________________
Jonathan Bertoni |
![]() |
![]() |
![]() |
Tags |
calcium, coral, reef, seachem, trace |
|
|