|
|
|
|
|||||||
 |
| Thread Tools |
12/08/2012, 02:32 PM
|
#1 |
|
In Memoriam
Join Date: Nov 2011
Location: Infinity and Beyond
Posts: 2,445
|
Not as smart as I thought I was. Let Retrofit Kit.
I have worked in the service feild for over 20 years in both mechanical and robotics. I recently purchaced a Let retrofit kit to add some attinic lighting. There are NO instructions what so ever. I figured out mostly everything except for the wiring of the moisture proff end caps. http://www.reefgeek.com/t5-fluoresce...ir-vs0001.html I have stuided these things for over an hour to take them apart so I can wire them. What am I missing? Are they just some type of push lock? Perhaps someone at Reefgeek should include some type of instruction manual. For me they could call is Manual for Dumbaxx's
Anyways I am sure someone out there has these caps. If you could please be so kind as to let me know the seceret. Thanks in advance Mark |
|
|
|
12/08/2012, 02:41 PM
|
#2 |
|
Registered Member
 Join Date: Apr 2011
Location: Pittsburgh
Posts: 2,174
|
They should just be push lock.
__________________
Jer Current Tank Info: 40b basement sump, 40b refugium, 30g frag |
|
|
|
|
12/08/2012, 02:54 PM
|
#3 |
|
Soylent Green is People!!
Join Date: Apr 2006
Location: Chico, CA
Posts: 759
|
Hah Hah,
I have had those before. They are push lock. 18AWG solid wire. http://www.unvlt.com/productlines/ap...0Resistant.pdf
__________________
125 AGA, 240W DIY MultiChip LED's, Mated pair Clowns, Fox Face, Kole Tang, Purple Tang, 6 Line, CBB, Acanthophyllia, 7 RBTA's, T. Maxima, Orange Monti, Green Monti, seriatopora guttatus, fungia sp Current Tank Info: Salt water since 1995 |
|
|
|
|
12/08/2012, 02:57 PM
|
#4 |
|
In Memoriam
Join Date: Nov 2011
Location: Infinity and Beyond
Posts: 2,445
|
Thank you gentlemen
|
|
|
|
|
| Tags |
| endcaps, retrofit |
|
|
