Eating my words.This eshopps started to pull!

Drae · 03/27/2013, 09:25 AM

I can't explain it but it's pulling all of the sudden. the bubbles aren't milky thick, but obviously this thing is balanced.. crazy. 24 hours of skim.. fishless live rock holding tank..

Drae · 03/27/2013, 09:26 AM

GroktheCube · 03/27/2013, 01:25 PM

I recently purchased one for the upgrade I'm helping my GF with (20H to 40B + 20H sump). It seems kinda finicky. When I strapped it on the back of her 20 to test it out, it bubbled like you wouldn't believe. It actually pushed the lid off of the collection cup! I brought it to the LFS, and it ran fine on their tanks, so I'm guessing it's just collected surfactants from lack of surface skimming. We'll see how it performs hanging on the sump, but I'm encouraged to hear that it's working for you.

JustinGr · 03/27/2013, 01:40 PM

I can't stress enough, remove the black foam sponge. It will get clogged and quickly and flood the cup and if you drain it into a small container, fill it and keep going...

I know... I had one running, still have it, and no black foam sponge. People forget this and fail to clean it every other day... It can and will happen...

Drae · 03/27/2013, 02:35 PM

thanks for the heads up. I'll run the overflow to the tank.

Drae · 04/03/2013, 11:06 AM

The little skimmer that could. .

Drae · 04/03/2013, 11:08 AM

Drae · 04/03/2013, 11:09 AM

48 hours after I repaired it.

wildman926 · 04/03/2013, 02:24 PM

Quote:

Originally Posted by Drae

but obviously this thing is balanced.

Key words there. Crappy pumps and all, but it will skim. A balanced skimmer will always outperform a skimmer with too much/little air to water volume pushed through the body. I like the full body design, very much like Reef Dynamics. Here is a pic of my old PSK-100 and 150.

PSK-100

PSK-150

dastowers · 04/03/2013, 03:04 PM

I have the same one. If I remove the sponge the water level is right at the first blue line- from the bottom up. I have the pipe twisted so the dot is facing the front of the tank.
Any way to get the level up other than choking off the air with a valve?

03/27/2013, 09:25 AM	#1
Drae RAIDER NATION! Join Date: Jun 2011 Location: City of sin... Posts: 3,476	Eating my words.This eshopps started to pull! I can't explain it but it's pulling all of the sudden. the bubbles aren't milky thick, but obviously this thing is balanced.. crazy. 24 hours of skim.. fishless live rock holding tank..

03/27/2013, 01:40 PM	#4
JustinGr Clown Pimp Join Date: Jan 2012 Location: Bloomington, IN Posts: 644	I can't stress enough, remove the black foam sponge. It will get clogged and quickly and flood the cup and if you drain it into a small container, fill it and keep going... I know... I had one running, still have it, and no black foam sponge. People forget this and fail to clean it every other day... It can and will happen... __________________ Thank You, Justin Grant Current Tank Info: Reef:75 Gallon, 90# LR, SSB, 2x AI SOL Blues Managed by Neptune's Apex, Inland Aquatics Dump Style ATS, 2 Koralia on wave maker, and MP 10 on custom wave.

03/27/2013, 09:26 AM	#2
Drae RAIDER NATION! Join Date: Jun 2011 Location: City of sin... Posts: 3,476

03/27/2013, 01:25 PM	#3
GroktheCube Registered Member Join Date: Dec 2012 Posts: 2,063	I recently purchased one for the upgrade I'm helping my GF with (20H to 40B + 20H sump). It seems kinda finicky. When I strapped it on the back of her 20 to test it out, it bubbled like you wouldn't believe. It actually pushed the lid off of the collection cup! I brought it to the LFS, and it ran fine on their tanks, so I'm guessing it's just collected surfactants from lack of surface skimming. We'll see how it performs hanging on the sump, but I'm encouraged to hear that it's working for you.

03/27/2013, 02:35 PM	#5
Drae RAIDER NATION! Join Date: Jun 2011 Location: City of sin... Posts: 3,476	thanks for the heads up. I'll run the overflow to the tank.

04/03/2013, 11:06 AM	#6
Drae RAIDER NATION! Join Date: Jun 2011 Location: City of sin... Posts: 3,476	The little skimmer that could. .

04/03/2013, 11:08 AM	#7
Drae RAIDER NATION! Join Date: Jun 2011 Location: City of sin... Posts: 3,476

04/03/2013, 11:09 AM	#8
Drae RAIDER NATION! Join Date: Jun 2011 Location: City of sin... Posts: 3,476	48 hours after I repaired it.

04/03/2013, 03:04 PM	#10
dastowers Registered Member Join Date: Mar 2011 Location: Youngstown, OH Posts: 74	I have the same one. If I remove the sponge the water level is right at the first blue line- from the bottom up. I have the pipe twisted so the dot is facing the front of the tank. Any way to get the level up other than choking off the air with a valve?