ditch the mp40's or fix them?

[Serega]

Originally Posted by myram

From what I was told, they used 2 different size bearings over the years in the MP10, so your best bet is to take it apart and see what size you have.
The one I fixed was a 2011 model, and I believe the part number was 696ZZ.

Thanks.
My pump is 2011 model also, do you think it's safe to say it's the same bearing? How many bearings is in one pump one or two?
Sorry to OP, didn't mean to hijack your thread.

[myram]

Originally Posted by Serega

Thanks.
My pump is 2011 model also, do you think it's safe to say it's the same bearing? How many bearings is in one pump one or two?
Sorry to OP, didn't mean to hijack your thread.

I would say you should be all set. There are 2 bearings in each dry side, if you do a google search for MP10 bearing replacment, you'll get a few great tutorials on how to do it.

[Serega]

Originally Posted by myram

I would say you should be all set. There are 2 bearings in each dry side, if you do a google search for MP10 bearing replacment, you'll get a few great tutorials on how to do it.

Thank you.

[tkeracer619]

Originally Posted by btucker7587

Meh...I'd go with the wireless Jebao RW-15 wavemaker

Same flow (maybe more) and they are $85 to $95 each. (depending where you shop)

I have an MP40 and it's a great product, but when the fan costs as much as a whole powerhead that can do the same thing, I will just go with the cheaper powerhead.

Unless the magnet is damaged you can fix the wetside for cheap.

If your wetside fails let me know and i'll gladly paypal $90 for your broken pump.

[flat4reefing]

ok so i download chrome and update the reeflink and then it looses connection and wont reconnect... why does ecosmart stink so bad? what am i doing wrong?

[flat4reefing]

okay it magically reconnected.... now it wont recognize all my products....

[flat4reefing]

i think im going to sell all these crap ecotech products..... 3000 dollars invested and they are still pieces of junk.

[myram]

http://www.reefcentral.com/forums/fo...play.php?f=501

[markalot]

Originally Posted by flat4reefing

i think im going to sell all these crap ecotech products..... 3000 dollars invested and they are still pieces of junk.

Good luck with that. I own just about every pump except the awesome looking Gyre and each have their problems. If you have bearing noise in a dry side that was new to you and did not fall in water then odds are it's an alignment issue and you need to go over the instructions for spacing and alignment again. I have two MP40's and one was whining bad but was fixed with a spacer adjustment and slight realignment on the glass.

It's the nature of having the motor on the outside, the alignment is up to you and miss-alignment will create stress and tend to cause early failure.

[flat4reefing]

I'm not having alignment oasis now I'm having connectivity issues

[flat4reefing]

I'm going to be calling ecotech on my day off this week to get this figured out. thanks for everyone's help

[EcoTech Service]

Based on previous posts in this thread, it seems like the OP dropped the VorTech into an aquarium and now it isn't working properly and is experiencing issues with EcoSmart Live and connection to the ReefLink.

It sounds like you might have gotten your pump working again? Either way, I'd encourage you to contact us using the information in my signature and we'd be happy to help you get everything up and running. You've obviously invested a lot of money into our products and the last thing we want you to experience is frustration and grief, regardless of who is at fault.

We look forward to hearing from you!

[tkeracer619]

Originally Posted by tkeracer619

Have you contacted ecotech about your situations?

Originally Posted by flat4reefing

No I never contacted ecotech

Originally Posted by EcoTech Service

You've obviously invested a lot of money into our products and the last thing we want you to experience is frustration and grief, regardless of who is at fault.

It isn't often a company will chase you down when there is a problem. I would call, they take good care of their customers.

[flat4reefing]

Originally Posted by flat4reefing

I'm going to be calling ecotech on my day off this week to get this figured out. thanks for everyone's help