ATI Powermodule Hybrid Club - Page 89

Tsin · 01/27/2015, 01:45 PM

Hi,all my tank 25 X 25 x 18 , which ati pm hybrid do you think friends?

sahin · 01/27/2015, 02:00 PM

Quote:

Originally Posted by Tsin

Hi,all my tank 25 X 25 x 18 , which ati pm hybrid do you think friends?

I would go for the 8 tube...you basically have a square tank and for me thats the only unit I'd use. Im using one on a 30 x 20 x 18.

asylumdown · 01/28/2015, 12:09 PM

On a 6'L x 34"W x 27" high SPS dominated tank, would you all recommend the 60" 8 bulb fixture, or two 36" 8 bulb fixtures? I'd like the option to dim, but I'm concerned about having to replace 16 bulbs per year.

urbaneks · 01/28/2015, 12:32 PM

I have a 72x36x22 tank and I have the 60" 8 Bulb unit. It's plenty of light even around the edges of the aquarium.

JOEYRM7 · 02/02/2015, 05:27 PM

Sahin

I didn't take your advice and went ahead and ordered a 36" 4 tube unit (tank is 36x20x20). My tank is about 16 months old, I feed well and I do not see pests so I decided to take the plunge.

I believe I am going with 2 blue + and 2 coral + unless people tell me otherwise.

Coming from the Hydras, how would you set up the light program for my lps/sps mixed reef? Really appreciate your help

Quote:

Originally Posted by sahin

Hi.

I dont think buying a new fixture will solve your problem. Sure, I think the ATI LED PM is a great light...but you've already spent a lot of money on the AI's. The thing is, I know they work...I've seen the results myself in my buddys large tank...In fact if I were to recommend 100% LED; AI Hydra 52 and Radion Pro's are what I would recommend.

Generally, the larger a coral is, the faster it grows. Frags can sometimes sit still for MONTHS not really doing much; photos taken every two week will show that actually, some growth is taking place.

As for the browning out; how old is your tank?

My buddies with Radions and Hydras typically channels as follows: Royal Blue and Blue at 100%, UV around 80%, whites around 40-45% during peak and Red and Green around 60% during peak. OVERALL intensity is around 65%

How is your parameters? Have you checked for pests? Are you feeding the tank well enough?

sahin · 02/02/2015, 05:34 PM

Quote:

Originally Posted by JOEYRM7

Sahin

I didn't take your advice and went ahead and ordered a 36" 4 tube unit (tank is 36x20x20). My tank is about 16 months old, I feed well and I do not see pests so I decided to take the plunge.

I believe I am going with 2 blue + and 2 coral + unless people tell me otherwise.

Coming from the Hydras, how would you set up the light program for my lps/sps mixed reef? Really appreciate your help

Keep the 1:1 Coral+:Blue+ combo. Run Royal Blue@100%, Blue@approx 50% and White@40-45%. Red maybe@10% if you want, but not needed IMO.

JOEYRM7 · 02/02/2015, 06:08 PM

What should I do with the T5's. Full power right away ir ramp up? Thanks again

Quote:

Originally Posted by sahin

Keep the 1:1 Coral+:Blue+ combo. Run Royal Blue@100%, Blue@approx 50% and White@40-45%. Red maybe@10% if you want, but not needed IMO.

bucfan · 02/02/2015, 09:44 PM

Do the T5s need to be broken in before they can be dimmed?

bucfan · 02/03/2015, 05:55 AM

How many T5s can be controlled at one time? Are they controlled in pairs of 4 T5s or 2 T5s?

flamron · 02/03/2015, 05:56 AM

Quote:

Originally Posted by bucfan

Do the T5s need to be broken in before they can be dimmed?

Run full for 50 hours then you can dim.

flamron · 02/03/2015, 05:57 AM

Quote:

Originally Posted by bucfan

How many T5s can be controlled at one time? Are they controlled in pairs of 4 T5s or 2 T5s?

My four bulb is controlled in banks of two. Two front and two back. Not sure about the 8 bulbs.

sahin · 02/03/2015, 06:34 AM

Quote:

Originally Posted by bucfan

How many T5s can be controlled at one time? Are they controlled in pairs of 4 T5s or 2 T5s?

On the 8 tube, there are two channels for the T5's each channel controls 4 tubes. On most units this is channel1= 1, 2, 7 and 8 and channel2= 3, 4, 5 and 6.

I however modded the channel selection to 1, 3, 6 and 8 for channel1 and for channel2 is 2, 4, 5 and 7.

reefSTC · 02/03/2015, 05:41 PM

Look aside, how does the ATI LED PM compare to ATI SP+Reefbrite XHO?

I am thinking of going t5/led but not sure which option is better for a SPS dominated tank.

wcharon · 02/04/2015, 05:06 AM

Quote:

Originally Posted by reefSTC

Look aside, how does the ATI LED PM compare to ATI SP+Reefbrite XHO?

I am thinking of going t5/led but not sure which option is better for a SPS dominated tank.

+2. Also will like to know if their is a huge difference in order to invest in a new equipment because the ATI/Led hybrid 60" will be expensive to ship to PR.

Thanks...

Patrick Cox · 02/04/2015, 06:49 AM

Quote:

Originally Posted by dg3147

Yeah, gonna try to run windows simulator on MAC and program that way.

That's what I do. Works fine.

sahin · 02/04/2015, 02:13 PM

Quote:

Originally Posted by reefSTC

Look aside, how does the ATI LED PM compare to ATI SP+Reefbrite XHO?

I am thinking of going t5/led but not sure which option is better for a SPS dominated tank.

Quote:

Originally Posted by wcharon

+2. Also will like to know if their is a huge difference in order to invest in a new equipment because the ATI/Led hybrid 60" will be expensive to ship to PR.

Thanks...

Aside from the looks and control...the cluster obviously has different channels. The LED's are also with ATI's custom reflectors. And quite importantly, right in the middle of the fixture...

However, for anyone in the USA, a SP with 2xReefbrites either side is a pretty awesome combo.

If cost isnt a factor, go for the LED PM. If it is, go for the SP with 2xReefbrites...1 x Reefbrite is ok though.

nova65ss · 02/04/2015, 04:24 PM

I agree if I had to do it over again the SP and reefbrite is hard to beat.

nova65ss · 02/04/2015, 04:29 PM

So I have been using this light for a year and a half on a basic program have yet to get into a custom layout for my combo. Mainly I ramp up the bulbs and only use the blues similar to a reefbrite morning and evening as well as throughout the day. I would like to add a little shimmer in the middle of the day by using some of the white leds is there a way to control the whites separate from the blues?

I would like to have the whites say start ramping up at 2 run a few hours ramping back down til they are off around 6 but don't know how to do so without also ramping the blues down I would prefer the blues run all day and ramp down at the end of the cycle. Any help? Thanks!

ssdawood · 02/04/2015, 05:02 PM

+1

I have led powermodule and my frag tank has sunpower with reefbrites. If money is not a problem led powermodule is best.

If you want to save money so you can buy more corals. Sunpower with two reefbrites cant be beat. I wonder if I can install four reefbrites on sunpower. Like two on each side. That would be awesome.

sahin · 02/04/2015, 06:58 PM

Quote:

Originally Posted by nova65ss

So I have been using this light for a year and a half on a basic program have yet to get into a custom layout for my combo. Mainly I ramp up the bulbs and only use the blues similar to a reefbrite morning and evening as well as throughout the day. I would like to add a little shimmer in the middle of the day by using some of the white leds is there a way to control the whites separate from the blues?

I would like to have the whites say start ramping up at 2 run a few hours ramping back down til they are off around 6 but don't know how to do so without also ramping the blues down I would prefer the blues run all day and ramp down at the end of the cycle. Any help? Thanks!

I will PM you my email. Send me your current light profile and I will add the white LED at 40% to run from 2-6. I run the white around 5 hours currently I think.

wcharon · 02/04/2015, 07:10 PM

Quote:

Originally Posted by sahin

Aside from the looks and control...the cluster obviously has different channels. The LED's are also with ATI's custom reflectors. And quite importantly, right in the middle of the fixture...

However, for anyone in the USA, a SP with 2xReefbrites either side is a pretty awesome combo.

If cost isnt a factor, go for the LED PM. If it is, go for the SP with 2xReefbrites...1 x Reefbrite is ok though.

Quote:

Originally Posted by ssdawood

+1

I have led powermodule and my frag tank has sunpower with reefbrites. If money is not a problem led powermodule is best.

If you want to save money so you can buy more corals. Sunpower with two reefbrites cant be beat. I wonder if I can install four reefbrites on sunpower. Like two on each side. That would be awesome.

Thanks Sahin / Ssdawood... are you talking about the Actinic Tech or the XHO model. In my case shipping is a pain overehere to PR so i prefer to try to get the ReefBrite.

bucfan · 02/04/2015, 10:33 PM

Do not mean to sound stupid but u just got my lamp installed and did not know how to connect my PC to the lamp? Is it a Bluetooth connection?

nova65ss · 02/05/2015, 05:52 AM

Quote:

Originally Posted by bucfan

Do not mean to sound stupid but u just got my lamp installed and did not know how to connect my PC to the lamp? Is it a Bluetooth connection?

Uses a usb cable from the controller.

bucfan · 02/05/2015, 09:19 AM

Quote:

Originally Posted by nova65ss

Uses a usb cable from the controller.

So connect cable to PC and run software?

nova65ss · 02/05/2015, 09:21 AM

Correct. You will need to go to the ati website and download the software on your cpu first.

01/27/2015, 01:45 PM	#2201
Tsin Registered Member Join Date: May 2013 Posts: 55	Hi,all my tank 25 X 25 x 18 , which ati pm hybrid do you think friends? __________________ Regards, Tsin

02/02/2015, 09:44 PM	#2208
bucfan Registered Member Join Date: Aug 2010 Location: Orlando, FL Posts: 415	Do the T5s need to be broken in before they can be dimmed? __________________ 205G Custom SPS dominated reef and 55G Red Sea Reefer 250 mixed reef

02/03/2015, 05:55 AM	#2209
bucfan Registered Member Join Date: Aug 2010 Location: Orlando, FL Posts: 415	How many T5s can be controlled at one time? Are they controlled in pairs of 4 T5s or 2 T5s? __________________ 205G Custom SPS dominated reef and 55G Red Sea Reefer 250 mixed reef

02/04/2015, 05:02 PM	#2219
ssdawood Registered Member Join Date: Apr 2013 Location: Wappingers Falls Posts: 324	+1 I have led powermodule and my frag tank has sunpower with reefbrites. If money is not a problem led powermodule is best. If you want to save money so you can buy more corals. Sunpower with two reefbrites cant be beat. I wonder if I can install four reefbrites on sunpower. Like two on each side. That would be awesome. __________________ Elos 120, ATI Led Powermodule , Hopefully SPS dominated reef

02/04/2015, 10:33 PM	#2222
bucfan Registered Member Join Date: Aug 2010 Location: Orlando, FL Posts: 415	Do not mean to sound stupid but u just got my lamp installed and did not know how to connect my PC to the lamp? Is it a Bluetooth connection? __________________ 205G Custom SPS dominated reef and 55G Red Sea Reefer 250 mixed reef

01/28/2015, 12:09 PM	#2203
asylumdown Registered Member Join Date: Dec 2009 Posts: 437 Blog Entries: 5	On a 6'L x 34"W x 27" high SPS dominated tank, would you all recommend the 60" 8 bulb fixture, or two 36" 8 bulb fixtures? I'd like the option to dim, but I'm concerned about having to replace 16 bulbs per year.

01/28/2015, 12:32 PM	#2204
urbaneks Registered Member Join Date: Mar 2010 Location: Chandler, AZ Posts: 620	I have a 72x36x22 tank and I have the 60" 8 Bulb unit. It's plenty of light even around the edges of the aquarium.

02/03/2015, 05:41 PM	#2213
reefSTC Registered Member Join Date: Dec 2011 Posts: 58	Look aside, how does the ATI LED PM compare to ATI SP+Reefbrite XHO? I am thinking of going t5/led but not sure which option is better for a SPS dominated tank.

02/04/2015, 04:24 PM	#2217
nova65ss Registered Member Join Date: Dec 2008 Location: Raleigh, NC Posts: 171	I agree if I had to do it over again the SP and reefbrite is hard to beat.

02/04/2015, 04:29 PM	#2218
nova65ss Registered Member Join Date: Dec 2008 Location: Raleigh, NC Posts: 171	So I have been using this light for a year and a half on a basic program have yet to get into a custom layout for my combo. Mainly I ramp up the bulbs and only use the blues similar to a reefbrite morning and evening as well as throughout the day. I would like to add a little shimmer in the middle of the day by using some of the white leds is there a way to control the whites separate from the blues? I would like to have the whites say start ramping up at 2 run a few hours ramping back down til they are off around 6 but don't know how to do so without also ramping the blues down I would prefer the blues run all day and ramp down at the end of the cycle. Any help? Thanks!

02/05/2015, 09:21 AM	#2225
nova65ss Registered Member Join Date: Dec 2008 Location: Raleigh, NC Posts: 171	Correct. You will need to go to the ati website and download the software on your cpu first.