ATI Powermodule Hybrid Club - Page 100

Snook65 · 04/25/2015, 07:17 AM

Can someone give me an idea of the weight of a 4 bulb 48" unit? I see where these units are described as "heavy" but I have not been able to find a weight listed on any website.

bucfan · 04/25/2015, 08:41 AM

Can the T5 ramp up-down be over a 2 hour period?

Patrick Cox · 04/25/2015, 08:55 AM

I'm curious how high people are running their LEDs at peak? I am slowly increasing my % and would like to know when I should consider stopping. My tank is mainly SPS. Thanks.

WT_JayJay · 04/26/2015, 01:56 PM

Quote:

Originally Posted by sahin

What does your replacement cable look like?

This is what its supposed to look like:

Either the cable is damaged or isnt for the unit? I'd try and get a cable from ATI USA.

Yup, thats the one he got. He had his local lsf order it for him so id assume it was from ATI.

But thanks, i Pmed the guy i bought it off of and he actually suggested i contact you

msderganc · 04/26/2015, 03:13 PM

Quote:

Originally Posted by Patrick Cox

I'm curious how high people are running their LEDs at peak? I am slowly increasing my % and would like to know when I should consider stopping. My tank is mainly SPS. Thanks.

I'm at 85% or so with blue twice as strong as white.

sahin · 04/26/2015, 04:23 PM

Quote:

Originally Posted by bucfan

Can the T5 ramp up-down be over a 2 hour period?

Yes.

Quote:

Originally Posted by Patrick Cox

I'm curious how high people are running their LEDs at peak? I am slowly increasing my % and would like to know when I should consider stopping. My tank is mainly SPS. Thanks.

I run my Royal Blue@100%, Blue and White LED's at 35% as I run an 8 tube unit over a 47G tank. With a larger tank I tank you can go upto around 50%; BUT make sure you acclimatise. Somewhere around 45% is IMO just fine.

Quote:

Originally Posted by WT_JayJay

Yup, thats the one he got. He had his local lsf order it for him so id assume it was from ATI.

But thanks, i Pmed the guy i bought it off of and he actually suggested i contact you

Get the ATI software from the ATI USA website. Ensure you have latest USB drivers etc on your system. Install the latest software you downloaded from ATI USA website. Hook up to a different USB point and see if it makes a difference.

If you still cannot get it connected contact ATI USA and see if they can assist you.

Patrick Cox · 04/26/2015, 04:32 PM

Quote:

Originally Posted by sahin

I run my Royal Blue@100%, Blue and White LED's at 35% as I run an 8 tube unit over a 47G tank. With a larger tank I tank you can go upto around 50%; BUT make sure you acclimatise. Somewhere around 45% is IMO just fine.

Sahin,
I am not sure I follow this. The fixture has separate adjustments for each color and then a global adjustment. What is your global % with blue and white at 35%? Thx

sahin · 04/26/2015, 04:54 PM

Quote:

Originally Posted by Patrick Cox

Sahin,
I am not sure I follow this. The fixture has separate adjustments for each color and then a global adjustment. What is your global % with blue and white at 35%? Thx

At peak, I set the GLOBAL Intensity at 100%, but the number 0-255 =
255 for Royal Blue (hence Royal Blue is at max ie 100%), and for Blue and White channel = 90 (ie (90/255)*100=35%). Hope that makes sense.

I tested the number of watts per channel and RB/B/W are all roughly equal.

Balagur · 04/28/2015, 02:10 AM

ATI hybrid 8*24, 1*75 LED

sahin · 04/28/2015, 12:41 PM

Quote:

Originally Posted by Balagur

ATI hybrid 8*24, 1*75 LED

Nice. How about a daylight shot?

ryanwongg · 04/28/2015, 03:42 PM

Hi group! I have been using LED's since i started the hobby but I am now a proud owner of a 24" 4 bulb ATI Led powermodule

this light will be going over my 22.5"X20"X19" Elos midi. I bought 2 ATI Blue+, 2 ATI Coral+, and 1 ATI Actinic bulb to play around with.

After trying (Front) Blue+ Coral+ --LED-- Blue+ Coral+ (Rear), I realized this combo was too white for my taste, even with the Royal Blue and Blue on at 100%. Would this combo turn more or less blue once the bulbs have burned in for 50 hours..?

What I tried next was (Front) Blue+ Actinic --LED-- Coral+ Blue+ (Rear) and was satisfied with this color. From what I read, actinics typically aren't recommended in a 4 bulb setup due to loss of par, but I don't believe this will be an issue in my LPS dominated setup. I have nems placed high in the tank, and the rest of my LPS are midway and on the lower portion of my tank. Id prefer a "longer" light schedule starting around 10AM and ending around 12AM. I'd like to run only LEDs for a couple hours to start the day , then T5+LEDs midday, then just LEDs at night. Can someone please recommend a safe amount of intensity and hours for the T5's to be on midday and also how long of a ramp up and ramp down?

Also, during the "break-in" period, do you guys run the bulbs on 100% for 50 hours straight?

shoutout to Sahin for all the contributions he's made in this thread!

Here's my FTS with LEDs from earlier this year. Thanks!

stpatrick · 04/28/2015, 04:01 PM

Quote:

Originally Posted by sahin

Looking great man!

Loving your results.

Thank you

Balagur · 04/29/2015, 02:45 PM

Quote:

Originally Posted by sahin

Nice. How about a daylight shot?

sahin · 04/29/2015, 03:29 PM

Quote:

Originally Posted by Balagur

Very nice! Thanks for posting.

sahin · 04/30/2015, 12:50 PM

Quote:

Originally Posted by ryanwongg

Hi group! I have been using LED's since i started the hobby but I am now a proud owner of a 24" 4 bulb ATI Led powermodule

this light will be going over my 22.5"X20"X19" Elos midi. I bought 2 ATI Blue+, 2 ATI Coral+, and 1 ATI Actinic bulb to play around with.

After trying (Front) Blue+ Coral+ --LED-- Blue+ Coral+ (Rear), I realized this combo was too white for my taste, even with the Royal Blue and Blue on at 100%. Would this combo turn more or less blue once the bulbs have burned in for 50 hours..?

I love Elos tanks...one day I will be able to afford the large versions.

The (Front) Blue+ Coral+ --LED-- Blue+ Coral+ (Rear) is actually a very good all round combo.

Quote:

Originally Posted by ryanwongg

What I tried next was (Front) Blue+ Actinic --LED-- Coral+ Blue+ (Rear) and was satisfied with this color. From what I read, actinics typically aren't recommended in a 4 bulb setup due to loss of par, but I don't believe this will be an issue in my LPS dominated setup. I have nems placed high in the tank, and the rest of my LPS are midway and on the lower portion of my tank. Id prefer a "longer" light schedule starting around 10AM and ending around 12AM. I'd like to run only LEDs for a couple hours to start the day , then T5+LEDs midday, then just LEDs at night. Can someone please recommend a safe amount of intensity and hours for the T5's to be on midday and also how long of a ramp up and ramp down?

This is a decent combo too. If you are in the USA and able to visit World Wide Corals you will see their 630G tank runs ONLY 1 WHITE tube...the rest are Blue tubes along with Royal Blue LED's. They are amazing colour on ALL their corals.

In terms of PAR the actinic tube may have low PAR, but it in terms of PUR; it probably is 100% and no other bulb will come close to producing close to 100% PUR.

In terms of a light profile, send me a PM with your email address. I will make a light profile for you. Let me know briefly what light period and times you would like.

Quote:

Originally Posted by ryanwongg

Also, during the "break-in" period, do you guys run the bulbs on 100% for 50 hours straight?

You can do this and just run the tubes for 50 hours and break them in for good. Else run them at 7 hours per day without using the LED's and no ramping. After 7 days they will be burnt in.

Quote:

Originally Posted by ryanwongg

shoutout to Sahin for all the contributions he's made in this thread!

Thanks.

Quote:

Originally Posted by ryanwongg

Here's my FTS with LEDs from earlier this year. Thanks!

Great looking tank.

robert s b. · 04/30/2015, 01:29 PM

Here's my 300 FTS I took yesterday. I'm running 60" ATI Led Powermodules 8x80 4x75. Loving it, growing Acro on the bottom. More then happy with this unit.

ryanwongg · 05/01/2015, 02:26 AM

nice layout robert!

Thanks for the insight Sahin! I've PMed you some details on the light schedule I'd like to make.

ryanwongg · 05/01/2015, 11:45 AM

Quote:

Originally Posted by Snook65

Can someone give me an idea of the weight of a 4 bulb 48" unit? I see where these units are described as "heavy" but I have not been able to find a weight listed on any website.

if it helps any, my 24" LED PM fixture is about 16-17lbs, and my friends 36" LED PM weighs about 25lbs

Snook65 · 05/01/2015, 04:56 PM

Quote:

Originally Posted by ryanwongg

if it helps any, my 24" LED PM fixture is about 16-17lbs, and my friends 36" LED PM weighs about 25lbs

Thanks.

bucfan · 05/04/2015, 02:58 PM

Is there any negative consequence to dimming a T5 bulb over a period of time?

vinhle00 · 05/04/2015, 11:31 PM

Anyone switched out radium metal halide/t5 fixtures for example Giesemanns, for the Powermodule Hybrid? how does it compare in sps growth and color ?

I placed the order for the powermodule hybrid today and will be joining the club soon. it was either the PM hybrid or the gieseman spectra.

msderganc · 05/05/2015, 12:04 PM

Quote:

Originally Posted by Snook65

Can someone give me an idea of the weight of a 4 bulb 48" unit? I see where these units are described as "heavy" but I have not been able to find a weight listed on any website.

My eight bulb 48 in unit weighs 45 pounds.

takayan · 05/06/2015, 08:54 PM

Where can I download the latest software?

sahin · 05/07/2015, 01:51 AM

Quote:

Originally Posted by vinhle00

Anyone switched out radium metal halide/t5 fixtures for example Giesemanns, for the Powermodule Hybrid? how does it compare in sps growth and color ?

I placed the order for the powermodule hybrid today and will be joining the club soon. it was either the PM hybrid or the gieseman spectra.

A couple of guys running multiple Radiums on large tanks swapped out and happy. Check out this tank:

Link to the thread:
http://www.reefcentral.com/forums/sh....php?t=2497232

That is probably the best example. There are many others but the above comes to my mind.

sahin · 05/07/2015, 01:53 AM

Quote:

Originally Posted by takayan

Where can I download the latest software?

Get it from the ATI USA webiste:
http://www.atinorthamerica.com/service.php

04/25/2015, 08:41 AM	#2477
bucfan Registered Member Join Date: Aug 2010 Location: Orlando, FL Posts: 415	Can the T5 ramp up-down be over a 2 hour period? __________________ 205G Custom SPS dominated reef and 55G Red Sea Reefer 250 mixed reef

04/25/2015, 08:55 AM	#2478
Patrick Cox Registered Member Join Date: Aug 2010 Location: Lexington, KY Posts: 1,697	I'm curious how high people are running their LEDs at peak? I am slowly increasing my % and would like to know when I should consider stopping. My tank is mainly SPS. Thanks. __________________ 100G Fairly New Aspiring SPS/Mixed Reef - 48" x 24" x 20"

04/28/2015, 03:42 PM	#2486
ryanwongg Registered Member Join Date: Nov 2012 Posts: 18	Hi group! I have been using LED's since i started the hobby but I am now a proud owner of a 24" 4 bulb ATI Led powermodule this light will be going over my 22.5"X20"X19" Elos midi. I bought 2 ATI Blue+, 2 ATI Coral+, and 1 ATI Actinic bulb to play around with. After trying (Front) Blue+ Coral+ --LED-- Blue+ Coral+ (Rear), I realized this combo was too white for my taste, even with the Royal Blue and Blue on at 100%. Would this combo turn more or less blue once the bulbs have burned in for 50 hours..? What I tried next was (Front) Blue+ Actinic --LED-- Coral+ Blue+ (Rear) and was satisfied with this color. From what I read, actinics typically aren't recommended in a 4 bulb setup due to loss of par, but I don't believe this will be an issue in my LPS dominated setup. I have nems placed high in the tank, and the rest of my LPS are midway and on the lower portion of my tank. Id prefer a "longer" light schedule starting around 10AM and ending around 12AM. I'd like to run only LEDs for a couple hours to start the day , then T5+LEDs midday, then just LEDs at night. Can someone please recommend a safe amount of intensity and hours for the T5's to be on midday and also how long of a ramp up and ramp down? Also, during the "break-in" period, do you guys run the bulbs on 100% for 50 hours straight? shoutout to Sahin for all the contributions he's made in this thread! Here's my FTS with LEDs from earlier this year. Thanks! Last edited by ryanwongg; 04/28/2015 at 03:50 PM.

04/30/2015, 01:29 PM	#2491
robert s b. Registered Member Join Date: Nov 2004 Location: Elk Grove, Ca. Posts: 1,930	Here's my 300 FTS I took yesterday. I'm running 60" ATI Led Powermodules 8x80 4x75. Loving it, growing Acro on the bottom. More then happy with this unit. __________________ Robert Current Tank Info: 300G DD, Edge 80g Frag Tank

05/04/2015, 02:58 PM	#2495
bucfan Registered Member Join Date: Aug 2010 Location: Orlando, FL Posts: 415	Is there any negative consequence to dimming a T5 bulb over a period of time? __________________ 205G Custom SPS dominated reef and 55G Red Sea Reefer 250 mixed reef

04/25/2015, 07:17 AM	#2476
Snook65 Premium Member Join Date: Jul 2001 Location: Sarasota, Florida Posts: 289	Can someone give me an idea of the weight of a 4 bulb 48" unit? I see where these units are described as "heavy" but I have not been able to find a weight listed on any website.

05/01/2015, 02:26 AM	#2492
ryanwongg Registered Member Join Date: Nov 2012 Posts: 18	nice layout robert! Thanks for the insight Sahin! I've PMed you some details on the light schedule I'd like to make.

05/04/2015, 11:31 PM	#2496
vinhle00 Registered Member Join Date: Apr 2010 Posts: 201	Anyone switched out radium metal halide/t5 fixtures for example Giesemanns, for the Powermodule Hybrid? how does it compare in sps growth and color ? I placed the order for the powermodule hybrid today and will be joining the club soon. it was either the PM hybrid or the gieseman spectra.

05/06/2015, 08:54 PM	#2498
takayan Premium Member Join Date: Aug 2004 Location: Superior, CO Posts: 748	Where can I download the latest software?