Where to hang Neptune Lunar LED Strings on an ATI

m0nkie · 10/15/2016, 11:47 AM

Hi guys. I have the ATI LED powermodule. These lights cover pretty much the entire top of my tank.

If I want to install a 5 LED string for APEX lunar module, where would I hook up these LEDs?

most pictures I can find have them under canopy or DIY light rack.

thanks!

ReefCowboy · 10/15/2016, 11:52 AM

Could you post pics of the fixture and lunar string? That would help some to pitch ideas to help you

m0nkie · 10/15/2016, 02:18 PM

Light is ATI 8 bulbs. 4ft long. pretty much covers the entire tank top.
[IMG]

[/IMG]

the APEX lunar Led string

I assume I can just use 2 sided tape and attach it on my light. that would look pretty ugly though.

slorichie · 10/15/2016, 07:40 PM

I used the little black peel and stick tabs (same as vortex power cord tabs) mounted tab on the back of fixture, and zipped tied lunar light to the tab. Can see from the front view. Not the best photo but here is one I can upload another if you want.
http://i1024.photobucket.com/albums/...psm38grufm.jpg

m0nkie · 10/15/2016, 09:53 PM

I kinda get it. So it's ok to have it along the back wall pointing forward?

slorichie · 10/16/2016, 09:01 PM

Yes lights up the tank fine.

m0nkie · 10/17/2016, 01:24 AM

thank you

10/15/2016, 11:47 AM	#1
m0nkie Registered Member Join Date: Apr 2014 Location: LA Posts: 6,264	Where to hang Neptune Lunar LED Strings on an ATI Hi guys. I have the ATI LED powermodule. These lights cover pretty much the entire top of my tank. If I want to install a 5 LED string for APEX lunar module, where would I hook up these LEDs? most pictures I can find have them under canopy or DIY light rack. thanks! __________________ 560gal in the making

10/15/2016, 11:52 AM	#2
ReefCowboy Registered Member Join Date: Jan 2012 Location: Long Island, New York Posts: 1,742	Could you post pics of the fixture and lunar string? That would help some to pitch ideas to help you __________________ Rimless 150 Gal Sps System: Giesemann Spectra/New Apex/2x MP40qd's+ 2x Gyre XF250's/Cor20/Custom Stand, Sump and Algae Scrubber/2x DOS dosing/Skimz Octa 205i Skimmer

10/15/2016, 02:18 PM	#3
m0nkie Registered Member Join Date: Apr 2014 Location: LA Posts: 6,264	Light is ATI 8 bulbs. 4ft long. pretty much covers the entire tank top. [IMG][/IMG] the APEX lunar Led string I assume I can just use 2 sided tape and attach it on my light. that would look pretty ugly though. __________________ 560gal in the making

10/15/2016, 07:40 PM	#4
slorichie Registered Member Join Date: Aug 2008 Location: San Luis Obispo, California Posts: 11	I used the little black peel and stick tabs (same as vortex power cord tabs) mounted tab on the back of fixture, and zipped tied lunar light to the tab. Can see from the front view. Not the best photo but here is one I can upload another if you want. http://i1024.photobucket.com/albums/...psm38grufm.jpg Last edited by slorichie; 10/15/2016 at 07:50 PM. Reason: Add photo

10/15/2016, 09:53 PM	#5
m0nkie Registered Member Join Date: Apr 2014 Location: LA Posts: 6,264	I kinda get it. So it's ok to have it along the back wall pointing forward? __________________ 560gal in the making

10/16/2016, 09:01 PM	#6
slorichie Registered Member Join Date: Aug 2008 Location: San Luis Obispo, California Posts: 11	Yes lights up the tank fine.

10/17/2016, 01:24 AM	#7
m0nkie Registered Member Join Date: Apr 2014 Location: LA Posts: 6,264	thank you __________________ 560gal in the making