|
|
|
10/04/2018, 06:33 PM
|
#1 |
|
Registered Member
Join Date: Jul 2007
Posts: 1
|
Tank question
So I have this 150 gallon bow front that I bought from someone and it has 2 cracks on the bottom plastic frame. The cracks are only on the front of the plastic and not on the bottom of the tank. One crack there is a gap between the glass and the plastic frame. I have no idea how that happened. So because the crack is not all the way through is the tank ok to use?
|
|
|
|
10/04/2018, 08:03 PM
|
#2 |
|
Registered Member
Join Date: Dec 2015
Posts: 72
|
It’s very hard to see, try taking different pictures.
|
|
|
|
|
10/05/2018, 07:13 PM
|
#3 |
|
Cloning Around
  
Join Date: Jun 2000
Location: Valencia, California
Posts: 25,267
|
As log as the plastic that is supporting the bottom of the tank is intact, you should be fine. PRoblems happen if the bottom glass is uneven and stresses the seams with the side/front/rear glass.
Kevin
__________________
Back in the pool, swimming with the sharks... Current Tank Info: Red Sea 425XL w/Kessil AP700, Vertex 180i Skimmer, 2 x Vortech MP40s |
|
|
|
 |
|
|
