ATI Powermodule Hybrid Club

[Keith@ ATI NA]

Originally Posted by Arnaldo24

Hi guys.
Im not new to the hybrid club as i had the 8x54 3x75 fixture a few years ago
Im coming back with a bigger tank in my new place and just got the 8x80 4x75 fixture from a local member.
Years ago a member “Sahin” help me by sending me the email with the perfect program for my needs
Unfortunately i know how to grow corals but not an expert on programming lights and Sahin is not active right now. Even tho i reach out to email already. Hopefully he’s ok just busy!!
Anyways was wondering if some1 here have the time and is willing to help me
I can send the same schedule Sahin did for me all i need it to add the 4th led cluster into the sunrise sunset programming
Thanks in advance!!!!!


Sent from my iPhone using Tapatalk

Assuming this is a non-wifi fixture it should be pretty easy to make this change. Send me the file and I can take a look.

[Nickmcc]

Hi I purchased a used older 8 bulb hybrid powermodule and i think the previous owner switched up the order of the ballast channels and I’d like to change it.
Currently
Channel 1: 1,2,5,6
Channel 2: 3,4,7,8
I’d like to make it
Channel 1: 1,2,7,8
Channel 2: 3,4,5,6
Is this possible? If so, how?

[Keith@ ATI NA]

Originally Posted by Nickmcc

Hi I purchased a used older 8 bulb hybrid powermodule and i think the previous owner switched up the order of the ballast channels and I’d like to change it.
Currently
Channel 1: 1,2,5,6
Channel 2: 3,4,7,8
I’d like to make it
Channel 1: 1,2,7,8
Channel 2: 3,4,5,6
Is this possible? If so, how?

Nick you would need to rewire it, this is pretty difficult on the LED Powermodule. This video would be a good start:
https://www.youtube.com/watch?v=qABYQiRLO6k&t

[Smite]

I've have a 180g, eurobraced, 6x2x2 sps dominant tank. Would I be looking at the 4x80w or 8x80w fixture?

Thanks,

Matt

[ccallahan]

I have the ATI 4X54W HYBRID WIFI POWERMODULE Fixture with 4 ATI 48" 54W Bulbs. I upgraded the Firmware over the weekend and forgot to back up my settings. Currently running ATI's default. Does anyone want to share their Settings File with me so i dont use the defaults...unless opinion is defaults are a good option. I currently don't have many corals but hoping to keep a mixture of hard and soft corals. Looking for settings that will provide good growth and color. Tank specs are below. Thanks for the help!!!

Crystaline 48"x24"x21" w/external OF with Trigger sump
Ecotech Vectra L1 Return Pump
Two Ecotech MP40QD
Simplicity 240DC Skimmer
Neptune Apex
Neptune Atk ATO
BRS Dual Media Reactor w/Pump
Trigger ATO 10g
Kessil A80 Fuge Lite w/mount arm
Tropic Eden
Real Reef Rock

[Keith@ ATI NA]

Originally Posted by ccallahan

I have the ATI 4X54W HYBRID WIFI POWERMODULE Fixture with 4 ATI 48" 54W Bulbs. I upgraded the Firmware over the weekend and forgot to back up my settings. Currently running ATI's default. Does anyone want to share their Settings File with me so i dont use the defaults...unless opinion is defaults are a good option. I currently don't have many corals but hoping to keep a mixture of hard and soft corals. Looking for settings that will provide good growth and color. Tank specs are below. Thanks for the help!!!

Crystaline 48"x24"x21" w/external OF with Trigger sump
Ecotech Vectra L1 Return Pump
Two Ecotech MP40QD
Simplicity 240DC Skimmer
Neptune Apex
Neptune Atk ATO
BRS Dual Media Reactor w/Pump
Trigger ATO 10g
Kessil A80 Fuge Lite w/mount arm
Tropic Eden
Real Reef Rock

Just a heads up, you'll only be able to upload another 48" program. Since the other sizes have different numbers of LED spots it won't accept them.

[ccallahan]

Keith,
Thanks for the heads up. I've been out of the hobby for a while, but jumped back in about a year ago. I love the ATI Fixture, just seems the default schedule is a little to white for me. Not really sure how to or what to programming the fixture to, to be able to get good growth and color. Currently, Fixture is hanging 14" from water's surface. Keith, Any help is greatly appreciated!!

[Keith@ ATI NA]

Originally Posted by ccallahan

Keith,
Thanks for the heads up. I've been out of the hobby for a while, but jumped back in about a year ago. I love the ATI Fixture, just seems the default schedule is a little to white for me. Not really sure how to or what to programming the fixture to, to be able to get good growth and color. Currently, Fixture is hanging 14" from water's surface. Keith, Any help is greatly appreciated!!

It is very difficult to assist with anything color related since it is so subjective. Its a bit like asking me to help pick out what color car you want. I personally prefer a very white tank, more like snorkeling at 10' rather than scuba at 80'.

Is this a wifi or non wifi fixture?

[ccallahan]

Keith,
This is a WIFI Fixture. Ive used Light Studio but just cant seem to figure it out.

[Keith@ ATI NA]

Originally Posted by ccallahan

Keith,
This is a WIFI Fixture. Ive used Light Studio but just cant seem to figure it out.

You don't use the Light Studio software for WiFi. Gives this a read:
https://www.atinorthamerica.com/ati-...factory-reset/

Cheers

[ccallahan]

Keith,
I followed those steps over the weekend after upgrading to latest firmware. Just don’t know how to now change the settings of Light Studio is not used?

[Keith@ ATI NA]

Step 4: Complete Initial Setup Procedure
Open your wireless settings and connect to “ATI-Fixture.” While you are connected wirelessly, you will not be able to access your normal wireless internet connection.

Open a web browser and navigate to 192.168.1.1/login

Log in using the default user name and password (admin / admin).

Select your preferred language.

Set a new user name and password (you can use the same combination you used prior to resetting the device).

Choose your type of lamp:
24” fixture = 1 module (1x75W)
36” fixture = 2 module (2x75W)
48” fixture = 3 module (3x75W)
60” fixture = 4 module (4x75W)

Run a self-test.

Save Settings.

Log in again, this time using your new user name and password.

Open the “Settings” tab and set the fan value. Do NOT skip this step or your fixture may overheat and cause damage.

For a 4 or 6 bulb fixture, enter the number “5”

For a 8 bulb fixture, enter the number “7”

[ccallahan]

So once the above steps are done, I adjust the color settings directly from the Fixture by logging into its IP Address, adjusting settings, and saving to fixture. Is that correct?

[Keith@ ATI NA]

Yes you use your browser to access the interface and make the changes.

[ccallahan]

I will try tonight. Thanks for the help Keith. Appreciate the immediate and prompt replies. Support is often overlooked when buying anything, but you have been a great help. Thank you!!!

[Keith@ ATI NA]

Originally Posted by ccallahan

I will try tonight. Thanks for the help Keith. Appreciate the immediate and prompt replies. Support is often overlooked when buying anything, but you have been a great help. Thank you!!!

In the future you'll get a much faster response using our live chat on our page rather than RC.

[Keith@ ATI NA]

If anyone has been following along and is interested in a Powermodule we have not only reduced our price on our scratch and dent fixtures but we are offering another 20% off for Black Friday. Use coupon code BLACKFRIDAY2019

https://store.atinorthamerica.com/co...econd-products

[Arnaldo24]

Can any1 help me?? Keith was nice enough to email me a program so i can upload. But i keep getting this message
What does this means and how can i fix it. ??



Sent from my iPhone using Tapatalk

[Arnaldo24]

Most importantly how can i upload the program.


Sent from my iPhone using Tapatalk

[ccallahan]

What model ATI Fixture are you using?

[Arnaldo24]

8 bulb 4 leds 60inches power module


Sent from my iPhone using Tapatalk

[ccallahan]

WIFI or non WIFI Powermodule?

[Arnaldo24]

Sorry. Non wifi


Sent from my iPhone using Tapatalk

[Arnaldo24]

Any1??


Sent from my iPhone using Tapatalk

[BeanMachine]

Originally Posted by Arnaldo24

Any1??


Sent from my iPhone using Tapatalk

I could be wrong but are those time points for the T5s? If so I believe they need to go straight up and down... the 60" LED Powermodule is not dimmable. Unless I'm not reading that right?

Have you tried the ATI program on a laptop? Its not hard to program.