|
03/18/2006, 05:56 PM | #1 |
Registered Member
Join Date: Mar 2006
Location: Australia
Posts: 4
|
Tank set up
Hey guys, greetings from down under, this is my first post, so here goes.
Im currently setting up a 145gal (6x2x2) marine tank. I plan on keeping fish & corals. At this stage i feel that a 4" DSB is the way to go but at the moment all Ive purchased is the cabinet, so lots of researching & reading to be done, busy busy busy. At this point Im stuck on the sump, not sure of the design yet, but Ive got a bit of room in the cabinet, (66"Lx21"Wx29H) so the world is my osyter, pardon the punt. Ive looked at a few sites & have a few idea's, but would appreciate some other advice that I may need to consider in regards to the size of compartments in the sump that may benefit the filtration system. I also plan on having a Durso stand pipe in each corner, so im a little unsure if Ill tee those pipes in together under the tank or just run one pipe in at a time, your advice would be much appreciated on this. Thanks guys, got lots of other Questions about the set up, but 1 step at a time hey. |
03/18/2006, 06:33 PM | #2 |
Registered Member
Join Date: Sep 2005
Location: Seattle
Posts: 2,843
|
To Reef Central Your right. Lots to research. Take a look at these threads. It will save you some time. http://www.reefcentral.com/forums/sh...hreadid=166836 Below is my tank it may give you some ideas. http://reefcentral.com/forums/showth...hreadid=780206 Regards, Pat
__________________
90 AGA Megaflow (Setup 1-24-06) 120 Lbs. Liverock EuroReef RS 100 Skimmer 2 X 150 MH 2 X 96 watt PC Actinic 2 Clarki Clowns (31 months old) 1 Niger Trigger (Owned 6 months) 2 Tunze 6055 PH Current Tank Info: 90 AGA Megaflow To Be Mixed Reef |
03/18/2006, 09:17 PM | #3 |
Registered Member
Join Date: Dec 2005
Location: Greenfield
Posts: 904
|
I have a 90 gallon with a Pro Clear Aquatics 150 sump with built in skimmer. I am running a Mag Drive return pump rated at 500 gph through a twist 3x uv sterilizer before returning to the tank. I would run each pipe in individually.
__________________
John Martin Current Tank Info: 29 Gallon BioCube |
03/19/2006, 01:37 AM | #4 |
Registered Member
Join Date: Mar 2006
Location: Australia
Posts: 4
|
jdm01,
Great, thanks for the advice John, ill look into it further. Regards Dave. |
03/19/2006, 06:07 AM | #6 |
Registered Member
Join Date: Mar 2006
Location: Australia
Posts: 4
|
Thanks for the advice, yes Ive visited melev site, very informative & spectacular tanks, but Im still a little confused on the size of the sump for my size tank, ie: size of each compartment including refugium? As i mentioned, the internal dimentions of the cabinet is 66"Lx21WX29H, so ive got a bit of room in there. Thanks again Fred. regards Dave
|
|
|